141 karma · joined May 13, 2022
https://downdetector.com/status/verizon/
I got got off the phone with Verizon, and they said the issue started on Aug 28 where some phones got a network update that limits their ability to connect to the towers. He's making a ticket with the network team to bridge from the tower to our iphone to push the network software update.
I guess many phones can't connect to get the update to fix their last bad configuration.
I hope it gets resolved soon.
we tried the full reset (volume up/down/side button hold) and network reset, which is not helping.
Both my and her phone have same cellular data settings.
tried calling '611' verizon help line which dumps us saying "the system is down" unable to take calls.
it's a big outage for sure.
https://www.sparkfun.com/sparkfun-lightning-detector-as3935....
It might be tricky printing PLA directly to copper clad PCB, but then you could expose the board to UV or etchant to make the PCB traces. Then remove the PLA plastic to expose the copper traces.
Best part is that 'sign up' links to https://archive.org/donate/
It also linked to this resource, which was more in depth... https://github.com/mytechnotalent/Reverse-Engineering
EDIT: Whoops... it looks like it mostly links back to the original article.
I have a multiple-fuse assortment kit that was a great (too good?) deal from AliExpress. Now I'm thinking I need to do some of those tests myself to verify their rating.
Searching 'wifi sdcard' and I found several vendors still making those cards, but I haven't used any of the newer ones.
Thanks for sharing the details of your project!
200,000 electrical contacts
850,000 cores
and that's the "old" one. wow.
* https://hackerboxes.com/products/hackerbox-0095-ai-camera
* https://www.instructables.com/HackerBox-0095-AI-Camera-Lab/
Where I would download the sdram binary image and flash with Balena then boot on the Pi.
Great work anyway! It was a nice opportunity to read up on Nim language too.
https://github.com/stickfigure/blog/wiki/GitHub%27s-wiki-mak...
https://www.hikvision.com/en/support/cybersecurity/security-...
Precondition:
The attacker has access to the device network or the device has direct interface with the internet
It's worked well for me, and can use libraries from Digikey and open source contributors.
Frontier fiber also has systems down (we called and they confirmed it).
It shows a nice layout with 3D-printed holder, pogo-pins, ESP32 Lolin as programmer, with CC2531 RF dongle as the access point.
UPDATED:
Yes... it's at the bottom on the article.
"Spence Konde has updated his excellent megaTinyCore to add support for all the ATtiny 2-series parts"
The major differences that I can see:
- More flash/ram, now up to 32k / 3k
- This has two USART modules, not just one.
- This has no DAC module, it was removed
- The ADC is improved: was 10-bit 115 ksps, now 12-bit differential 375 ksps.
I'm curious to see what they have for using it with diver communication and collaboration. If one diver sees something of interest, they can easily notify other divers. I'm not sure if or how well Bluetooth works underwater?
The haptic vibration would be useful to notify about reaching maximum bottom time, and for decompression rest stops while ascending.
But I think I would still keep my traditional dive computer next to pressure gauge in my diving setup.
I wonder if they will have a wireless pressure sensor on the tank so you can also track air pressure and consumption? That would be neat.