PaulBGD_

In my area, they actually let you bypass the 1.2TB cap if you use their router.

Plex does a fairly good conversion too, iirc using ffmpeg.

Check the link, the video, or the title. This is all running on real hardware.

One data point, I’ve been affected by this for decades now. I had no idea before the article that others experienced it too.

I do brush the dust off or blow it off before, one method for not pushing everything around when cleaning with IPA is to use extra IPA and clean in the sink, so that the dust/dirt/flux runs off with the IPA.

I would make sure you’re not pushing around residue if it leaves contacts duller, 99% IPA shouldn’t leave it’s own residue (unless the dullness is from scratching the pads with the cleaning.)

Vapor method works well enough, but requiring sunny days is a bit of a bummer. I use it sometimes, but submersing in a UV box works pretty well without being too rough.

I honestly don’t run into that with magic eraser, you’re keeping the eraser wet right? I might just be pretty gentle with it, but I’m pretty sensitive to this stuff and haven’t noticed any damage.

Yep go for the direct application stuff, I forget exactly which series it is but is easier to apply. One thing I’ve copied from the YouTuber TronicsFix is applying the deoxit to a small square of magic eraser and using that to clean the contacts.

I also do refurbishing, I’ve never found IPA to damage boards (evaporates fast without any residue.)

You can deyellow with retrobright, but the downside is that it makes plastic more brittle. If the plastic is already brittle, there’s not many options that don’t involve melting/warping the plastic. For some stains you can get them out with a magic eraser, it’s essentially a high grit sponge.

Agreed about deoxit, it’s still good for contacts though (cartridges and such.)

If anyone is going to do it I highly recommend just going with esphome now for the firmware, it’s way simpler and better maintained. You can even update the firmware over the network.

I have a GBA micro and I can't imagine something like this ever being released again to a wide market. It's just too dang small! Now a GBA (or SP) sized handheld I'd definitely be down for.

Yeah agreed. I’ve talked with Pablo before about languages, he just really enjoys discussing them and wants to be on the same page of what you’re discussing.

I am however now worried if I said anything about Go lol

My favorite is on the Apple TV, "search for [some video] on youtube" will actually open the app and search for it.

I think the big issue is that a lot of these aren't discoverable, and because Siri isn't very smart at natural language you won't discover them by asking for something similar like you could with Google Assistant. An LLM for parsing requests could be super interesting here.

Looks cool, but what do I gotta do to get an actual printed book? Would love something I could physically reference.

I don't agree with your either/or. My wireless mouse on the rtings table has a 6.3ms latency, is sub $40, and accepts a standard AA which I use a rechargable for. Battery life lasts 4-5 months on a single battery, and I'm reusing batteries I've had for 5 years.

I do personally agree that unstandardized batteries are a problem in wireless mice as eventually you'll be unlikely to find an exact replacement, but I think there can be plenty of wins from wireless. No cable drag (annoying!), no cable running across the desk (I can stow my mouse in a drawer in less than a second to clear my desktop), and I don't have to worry about the cable fraying over time (legitimately something that happened with my razer years ago!)

Even in the Raspberry ecosystem you can easily pick up a Pico, which offers all of that.

Was it the 3DS perhaps?

Nope, you can install UWPs pretty freely these days with developer mode. The one downside, is you have to reboot your xbox between developer/retail mode in order to use apps from the other mode.

Or tie re-pairing to the iCloud account on the device, seems like that’d be sufficient for anti theft.

I have both a modded VINDRIKTNING and the airgradient, imo the airgradient is worth it if you want everything in one package. More accurate than the ikea, a nice screen/case, and you don’t have to strap a humidity sensor to the outside. Plus CO2 is great, more people need CO2 detectors.

I wish there was an easier way to keep on with tags on more instances though, following users I don't have to worry about that.

I would recommend a local CPA, who can keep your details private and give you accurate tax advice.

You could get a Sony TV, they’ve been making OLED tvs since 2017. A lot of them (all? I had a hard time finding sources on some) use the exact same panels as LG.

Even bigger than that (I think at least) is the potential for fully voiced mods. There’s nothing stopping modders at that point from adding content indistinguishable from the base game.

Just a heads up, if he's staking the Ethereum directly then the money is still safe. The Ethereum team hasn't implemented staking withdraws yet, which should happen this year: https://ethereum.org/en/staking/

It sounds like you’re describing loneliness, and objectively you mean aloneness. You can be lonely without being alone.

I think it’s because most people who are pro electric understand their downsides, and usually the downsides are presented as dismissal (eg why buy an electric, you have to stop when you’re traveling cross country.) It’s kind of a boring topic unless there’s something new to discuss.

Looks cool, although I’m a little curious about the LED controllers that are coming soon. Will they have any clear advantages over WLED?

Did you try the solution in the video?

I’ve seen gpt-3 do this in general, it’s quite interesting. It’ll quote things that sound right to the prompt and response with realistic references and names, with no actual results. These types of AI seem to be against admitting they don’t know.

I originally went the same route as you, and found that https://github.com/pion/webrtc is probably the best package out there for webrtc. I learned go just for it, and it paid off tenfold. Less memory, more connections, lower latency.

Playing an emulator requires you to grab the keys from your purchased switch, and dump your games. I’m not going to pretend that a lot of people don’t do this, but this is how it’s recommended to use the emulator.

We use this with vite-plugin-mkcert to provide https localdev with just the installation of mkcert from homebrew. Wayyyy simpler than any other method of providing localdev https.