Why is it less harm compared to cigarette? I would assume the cigarette at least has a filter which makes things a little better?
545 karma · joined January 3, 2012
I hate to be discouraging, but maybe the author should make an attempt to understand navigation before cooking up something like this.
To be honest, I can’t articulate how I do it. I just somehow manage to do it.
Oh well.
Turbulence, especially generated by thunderstorms, or close to it.
I completely understand your analogy and you are right. However just to nitpick, it is actually super important to have a weight on the airplane at the right place. You have to make sure that your aeroplane does not become tail heavy or it is not recoverable from a stall. Also a heavier aeroplane, within its gross weight, is actually safer as the safe manoeuverable speed increases with weight.
Blackberries? Granted, they failed but for a completely different reason.
SignalWire is the primary sponsor of Freeswitch but is mainly geared towards HUGE installations. BulkVS is cheaper and better in my opinion. You can also look at AnveoDirect, which is more raw than BulkVS, but you can become really really fancy with it. Like, call center fancy.
There are other comments about providers, but my way is way cheaper and you can run you EPBAX on a pi or even get a pre made VM from Azure, Amazon, etc.
Damn I hate paying rent.
Eh, I guess I can flex a little. Living in the Pacific North West, I do not have to play mind games. I can almost get IMC delivered on demand. :P
Also, electric tools from Snap-On are pretty meh. Dewalt, Makita and mayyybbee Milwaukee all the way.
These are the ones specifically for soundproofing. Do you also want a list of stuff for the fiber?
Now you either have a tool that might be unreliable and can cause you trouble for the next job. Or, you spent money that you didn't have to spend by buying the lower grade tool when you needed to buy something better anyway.
> To be honest, Harbor Freight and other store brands (Husky, Kobalt, etc) have always been reliable enough. As a home-gamer, I certainly couldn't see being able to have a toolbox full of Snap-On, especially before completing my engineering degree.
Here you have a solid point. I am thankful that I am able to afford good tools. But if someone in unable to justify, I would say either work to be able to justify it, rent, or buy the best you can afford if you need the tool right now.
> But, to the point about rounding off a nut, something like that is rarely a function of tool quality and more about technique.
Maybe you are right. But here is an exaggerated example. You have a socket that has more clearance than ideal. You loosen one nut, and that was okay, you loosen the second one, that was a little tighter and that whole setup flexed a bit, but turned out okay. The third one is where things slip. Now, you have a problem. At least that is more or less how I land into trouble.
First hand experience. I have a 2 story house. I was going crazy with people walking upstairs while I was trying to work in my office downstairs. Got hold of a flooring guy who has hundreds of glowing positive reviews, and offered multiple references. He wanted to rip out the carpet and screw the floorboard to the joists, more. Got his work contract and added the clause that he will not get paid unless the sounds stay gone for 3 months after the job. Paid a premium for the clause. The creaking came back in 2 months and the impact noise never went away.
Got hold of another guy and he said, sorry can't do anything about the noise beyond what is already done. The third one said the same as well.
Finally got frustrated enough to do my own research and came up with materials and techniques that I had to "import" from California to Washington. Bought a bunch of tools. Now I have no noise, and as a bonus, ran conduit in the floor to have OS2 fiber everywhere in the house.
DIY is not always about saving money. It is also about getting the job done so it stays done and not doing the bare minimum to make it legal and to get paid.
Unless you are billing by the hour (ie in consulting), you are driving to the store during the time you would be parking your butt in the couch and viewing, reading or thinking about something that does not generate cash. At least that is what it is for me. If you literally lose money by driving to the store, your argument holds.
> And if you're thinking "Oh at those prices the tools will be low quality" I can assure you, they'll be good enough for this job.
Maybe they are, maybe they are not. I tinker with cars and motorcycles. Every single piece of my tools is Snap-On or something really comparable. If I use a cheap Chinese brand and round off a nut, that is really going to hurt. It will hurt more than what it hurt to buy a socket set for close to $200.
Also, if you are approaching something the first time, low quality tools will get you bad experience that will resist, maybe prevent you from trying it again. I might be one of those weird ones, but for me, Buy once, cry once.
Now, I am scared of even the thought of pulling out my pen and writing. And you merely call it daunting?
/s
Some people assume people will fucking buy anything when wrapped by a pretty website eh?
Did I ever tell you, I "love" software engineers and their mentality of "ship first, fix bugs later"?
/s
Let's see, a pilot flying in the yellow hits turbulence followed by a wind shear, and pulls up...