Using your list I'd likely keep one IDE and comoposite video cable, but toss the RG59 and CAT5 because I could use a current RG6 or CAT6 cable in their place.
316 karma · joined September 1, 2009
Using your list I'd likely keep one IDE and comoposite video cable, but toss the RG59 and CAT5 because I could use a current RG6 or CAT6 cable in their place.
Mid-stream they said they were deploying 20 real V3 Starlink satellites.
At the end of the stream the said all 20 had checked out as well.
1) I had to abbreviate the title as the official article title is 4 characters too long for HN.
2) The gift link in use to bypass the Verge paywall was posted by the official Verge account to /r/Android on Reddit[1].
[1] - https://www.reddit.com/r/Android/comments/1rktkbp/comment/o8...
I won't spoil it here either :-)
If you meant PC-based mesh networking, I'll leave someone more knowledgeable to speak about that :).
[1] - https://meshtastic.org/
[2] - https://meshcore.co.uk/
Further, "Occasional updates may appear at unpredictable intervals, but there will be no support, no responses to issues, no discussions, and no community management in this or any other public venue."
Nothing salacious here - just another one man open source project with a burnt out maintainer :(.
[1] - https://github.com/markqvist/Reticulum/discussions/1069
Select-Play-Select-3-0-Select ;-)
Also can't forget the ,#401 dialing prefix to enable the device to call home over the Internet using a USB Ethernet adapter instead of the phone in the early days.
TiVo's whole approach to commercials in recordings was largely informed by ReplayTV though. ReplayTV took a lot of heat and lawsuits for their automatic commercial skip functionality, which is why TiVo never implemented it and buried 30 second skip behind the code.
[1] - https://support.espn.com/hc/en-us/articles/40378137547796-Wh...
[1] - https://we1spn.org/
Does anyone know exactly what the Bosch service sends the dishwasher?
While I agree that connecting a dishwasher to the Internet should not be necessary, it does open the door to an interesting scenario if what gets sent to the dishwasher is not a command to run a mode but an actual program to control the dishwasher. In theory that would mean that Bosch could alter the programs that get sent to improve the dishwasher over time.
On a dishwasher with no connectivity the modes simply are what they are from the factory. But on a connected dishwasher if the Bosch engineers figure out that when in ECO mode using every third sprayer saves water while not altering the cleaning performance expected of that mode, they can update the payload and make the dishwasher you already have even more efficient. They could also in theory create a whole library of modes for specific use cases or scenarios (All glass, hard water, etc.)
Of course, this has potential drawbacks as well. They could change a mode and alter behavior you expect, and it could potentially be a hacker's playground, but if done well it could be a net positive.
They would buy a 30 minute paid programming in the early hours on cable TV networks under the name "Teleworld Paid Programming". The box would tune the channel, record the show, and then decode the data from the recording.
I always thought there was something interesting there, as the process would need to survive the MPEG encode/decode process on the TiVo itself in addition to whatever they needed to do the broadcast.
I had to run the link through TinyURL because using the original URL pulls up the 2023 HN thread which is entirely different.
It looks like they are headed to a multi-threaded pread implementation now [3] and someone has created a patch to tweak the current mmap fallback that uses pread to perform better in the meantime [4].
[1] - https://www.libtorrent.org/upgrade_to_2.0-ref.html
[2] - https://github.com/arvidn/libtorrent/issues/6667
If you’re a desk jockey, or impact resistance is not a concern, CR-39 will give the least aberration with the exception of crown glass.
The hidden hack here if you need/want impact resistance is to ask for Trivex lenses. Same impact resistance as polycarbonate but much better ABBE value. It’s often overlooked because it costs a little more than polycarbonate and most people don’t complain about the distortion.
Also, anecdotally, you get what you pay for with progressive lenses. I have a cheap lens in my sunglasses and a higher end lens in my daily drivers and I can easily tell the difference.
[1] - https://cdn.cloudflare.steamstatic.com/apps/valve/Valve_NewE...
The thing for me is that neither the razor blade model nor the subscription model fit my actual use of the product. For me a printer is essentially a piece of infrastructure. It's not the kind of thing I upgrade or want to pay any attention to. I buy one, set it up, and basically run it until it dies or falls out of support. I only replace them when I absolutely have to, and I would prefer that to be as infrequent as possible.
I'm willing to pay for something that fits that model. Charge me the real cost for the physical printer - including R&D and ongoing support - and in turn come back down to reality on the consumables.
I'm saddened that no one can make this model work, but I understand why. Very few people are going to want to go from $100 printers to $500 printers. Though, as the world becomes more paperless I can see this occurring in the long tail - "Hey, buy a printer. Never know when you'll need it and it's going to last you."
At home I started with a Boca 14.4, and upgraded to a US Robotics Sportster 33.6. I got the Sportster early and the modem ended up having a "death spiral" issue where speeds would decrease over the length of a call. Thankfully USR socketed the ROM in the modem so you could login to their BBS, request the new ROM and then replace the ROM to resolve the issue.
After going through the ROM ordeal, and then seeing 56k fracture into two incompatible camps initially (X2 and K56Flex), I really wanted to get into a Courier at home to avoid a likely double hardware upgrade. I eventually got into a US Robotics discount program and was able to make it happen by flipping the Sportster. I ran that modem to the end, and sure enough when 56k was standardized into V.90 it was a simple software update on the device.