3,570 karma · joined September 30, 2010
Email: matt@[HN username].com
As for using gloves, you won't add an air pocket, as the gloves are only used for applying a really thin coating to the heatsink. By really thin, I mean just enough to be visible on the heatsink, while still being able to see the heatsink surface through the thermal paste. That should be enough to fill any gaps in the heatsink surface.
Using plastic gloves (or just put a plastic bag over your hand) spread a REALLY thin layer over the cooler using your finger. This is simply just to fill any small grooves in the coolers surface. If you lap your cooler you don't need to do this.
Using a credit card spread a layer around 1mm thick on CPU, the main thing here is to just try and cover the whole area of the CPU that comes into contact with the cooler.
The most important thing is not to fret too much about this. Once you've put it all together, run a stress test and keep an eye on the CPU temp, if it goes too high, just clean the paste off and try again :)
0 - https://itunes.apple.com/gb/app/one-single-life/id417890518?...
Edit: My bad, thought you were talking about the Freelancer / Seeking Freelancer threads
However, Virgin don't seem to have clarified if and how the online log in password is hashed.
[0] -https://virginmedia.response.lithium.com/portal/conversation...
I suspect their server has succumb to the Hacker News effect
Players who took part in that hybrid plan will still be able to play their
purchased games through Steam, but streaming games purchased through
Cloudlift or the older Playpass subscriptions will no longer be usable
after the end of the month.
You may still be able to finish them.I remember seeing that in a gaming mag, but it was C--T at the end, with a little note saying "we're sure you can figure out the missing letters"
I suspect there's a lot of people like me who don't use their phones for 3D gaming, or other intensive tasks, so just have no need for a faster phone.
The only reason I've now upgraded to a 5s is because I couldn't buy a new 4s with more than 8 GB storage. Can't see myself upgrading from the 5s any time soon.
The flooding issue I mentioned. It may have been different with the RX7, but the RX8 has a de-flood procedure that works 9 times out of 10. And failing that a bump start usually does it. Although I've never flooded mine, I'm always careful not to shut her down cold.
Oil usage in the real world is not much worse than many other performance cars, in fact it's better than most Honda S2000s. But for people who are not used to having to regularly top up oil I could see it being a ball ache.
- The vast majority of rotaries will need a full rebuild before 100k - worse
- They rev to 10,000 RPM with an unbelievably smooth power delivery - better
- I'm lucky to see 22 mpg - worse
- The engine is so small and light that the RX8 has perfect 50/50 weight distribution - better
- If you turn the engine off before it's warm it can flood - worse
- 231 bhp from a 1.3 litre engine? - better
Oh, and the noise - BETTER!
I do believe with more time and money invested the Wankel Rotary could be better than a standard Otto Cycle IC engine in every way. But electric is the future now, so that won't realistically happen.
1 - I can't believe its's been over 4 year since Wave launched (and flopped)
2 - In those 4 years, UI trends have changed a lot. The UI in that screenshot looks horribly dated.