npk

I have a serious question that might sound not serious. The articles I read about boeing seem to focus on assembly line issues. As someone who flies a lot, assembly problems scare me, but so far assembly qv hasn’t been catastrophic (right?). It seems the real issue is a design flaw in the 737max pilot interface. Aside from some articles that feel vague (like competition with airbus led to some poor decision making); the chain of decisions that led to the design flaw aren’t really reported on (right?). Do you all have the same read?

Carnegie Observatories (in Pasadena CA, not the telescope) is hosting an open house today (https://carnegiescience.edu/carnegie-observatories-2023-open...). It’s also almost the 100-year anniversary of one of the most important discoveries in science (and took place at Carnegie).

It turns out that this wavelength of infrared is short enough that it sees through windows just fine.

I personally had a bad customer service experience from them and switched. It's not obvious to me if you can generalize from one person's experience -- however -- the crux of my issue is their choice to not allow you to call them on the phone. It looks like this is still true (but I'm not certain). As a result of their cheapo policy, and the particular problem I was having, I switched.

They answered this question many years ago.

http://news.ycombinator.com/item?id=23938

Being proud, egotistical, or a braggart are all human characteristics. I mention this for two reasons. First, without the benefit of direct contact, you really have no idea what kind of person sivers is, or what his intention was when posting. Second, even if he is an egotistical bastard, so what?

Few people are in a position to donate $20 M to charity. Fewer still who are willing to give up what they worked so hard to make. This puts sivers in the top (some small number) percent of human population in important objectively measurable criteria.

Personally, I enjoy learning more about people I admire, flaws and all.

The standard deviation is simply a measure of the spread of a distribution. There's nothing wrong or right about high standard deviations. In fact, the high standard deviation means that you should expect highly variant performance.

Look at the figures. The performance of Slicehost follows a sawtooth like pattern. The quantity standard deviation is useful because it quantifies what to expect. Plus or minus one standard deviation means that ~ 2/3 of the time you will fall in that range.

If you think about the problem a little bit, you might be more worried about the standard deviation of the standard deviation. This, in fact, would be a useful quantity, but hard to measure.

EDIT below this line ------- Several comments below have commented that SD is somehow less useful if it's "large" (or large relative to the mean, or whatever). The reason people think large SDs are indicative of a poor experiment is that in school lab classes one calculates the SD and call it the "error".

The standard deviation is a measure of spread, if it's large then the spread is large. Knowing the spread has value. In this case, under the parent's experimental conditions EC2's performance is more constant than that of slicehost's.

A fair critique of the blog posting is that the error on the standard deviation may be large, depending on the experimental conditions. It is _not_ a fair critique to say that the SD is too high to make a prediction, you just have larger performance spread. Note that the performance spread described is not necessarily "error". The spread is inherit to either the server (as implied by the article) or the method (in which case it is an error).

> "Long Jumps" is a myth imho.

You are 100% on point.

The parent's poster's point on conformity is well taken. Still, "independent" researchers are viewed with suspicion because research is hard. As psranga points out, to make a long jump a researcher has to stay on top of the incremental steps. Unfortunately, for 99.9% of people, to do this they must be fluent with the literature and much more importantly talk with other researchers. No one works in a vacuum (and don't bother bringing up counter examples like einstein or newton).

Conformity is a big problem. It might arise when too many PhDs are hustling for a small pie. I'm not sure.

Sparkfun just started selling a book called "Electrical Engineering 101". I've never read it, but I imagine it's pretty good.

Do you have access to a good electronics lab? A lab + H&H might be sufficient. I learned 80% of my electronics this way, but the last 20% was learned from old crusty EEs. If you don't have access to a lab, you can build your own (oscilloscope, function generator, power supply) for a few hundred dollars. I don't know where you can find old crusty EEs.

If you want to learn how to implement MCMC I recommend:

Bayesian Logical Analysis Physical Sciences by Gregory

Gregory's book explains a lot more of the engineering (autocorrelations, step size jumping, etc..). Even better, it discusses how to perform model selection using a clever annealing technique. Though model selection may not be of interest to you.

ps - MacKay's book is my nightly reading, so I'm not dissing MacKay :)

Great ideas. I'm particularly impressed with the term "web 3d". The PR will just roll in -- especially in "today's economy" -- press will love to discuss Americans who actually (1) make things and (2) sell those things.

I've had a very nebulous idea that's been percolating in my mind: software designed for small machine shops to organize their work. It never occurred to me to organize hobby folk. awesome.

The statement "only has meaning if the distribution is presumed to be normal" is wrong. The SD is a summary of the spread of a distribution. In fact, for most centrally concentrated distributions (including a uniform one) +/- 1 sigma corresponds to about 60% of the mass of the distribution. This is an amazingly useful thing to know.

As the above triva factoid points out, the standard deviation is an important summary statistic. More interestingly by using mean, variance (or sd), skew, and kurtosis, you can describe almost any centrally concentrated distribution. Even distribution with heavy tails.

I think what the OP meant is that most 3+ sigma results are not truly 3+ sigma, because most distributions in this world are not gaussian, but instead have large wings. SD is most useful when you know what the underlying distribution is. Currently it's more in fashion to communicate spread using confidence intervals because they presume less about the underlying distribution.

80 hours a week for two months in the Antarctic "Pig Barn." The heat was turned off for about three weeks.

http://stratocat.com.ar/bases/41e.htm

Fortunately for you 2009 happens to be the international year of astronomy. Buy your daughter this:

https://www.galileoscope.org/gs/

She'll be able to do a variety of experiments on it, and if it turns out she actually enjoys looking through it, you can then buy her something more pricey.

How complicated is it? Can you make it yourself? It's probably best if you do. If you have something you want to make in quantitiy, you'll want to hire someone who is experienced with tooling up a factory efficiently. What you're doing is not really engineering, but more like "drafting".

If you live in the bay area: http://techshop.ws/

If it's relatively simple, you can find a CAM house that will build the part for you, but then it becomes expensive. This place has an FDM house (wikipedia for details): http://www.emachineshop.com

You can find cheap drafters on craigslist who can make a solid model of your part that you would ship to the machine shop.

good luck

I've asked this question months ago, but I never received a satisfactory answer:

What is the value of stock in a private company? Do you receive dividends on the stock? You can't sell the stock to other people? The only time it's of value is in a liquidity event. Suppose Fog Creek's not planning one in the future, what does this stock do?

Excellent,

I've been intending to play with CUDA compuation for a while, this seems like a great way to begin. It's especially nice that the documentation seems helpful. I'd be curious to hear peoples experiences with pycuda.

The point is that climate models are not testable. Bernoulli's equation is a "good" approximation because we know when it fails.

If we're going to rely on climate models to define policy, we should understand what they're good for. You say that 0.5 m v^2 is a good enough approximation until we say otherwise, but the same statement doesn't apply to climate models. The models are complicated, nonlinear, and the scientists running them have pressure to produce certain results.

>that doesn't seem very free-markety at all.

You're wrong. The free market comes from the board of directors who approve such the "heads I win, tails I win" package. The board was not forced by any non-free-market laws. Thus, these compensation packages show the free market working.

Alex3917 - I don't disagree. But, isn't Godin's approach still masterful self marketing? Being self-referential is tacky. So, justifiably, he avoids it.

My point: the fact that you know his style of promotion means he's self promoting. :)

First impression: elegant looking site. Put the "launch portal spy" link on every page (maybe).

I've never heard of Vignette Portal. I don't understand 95% of the text of your site. For instance:

"Portal Spy will change the way you think about your Vignette Portal platform."

If you want me to read it, should be:

"Portal Spy will change the way you think about your Vignette Portal, the most popular BLAH BLAH, platform."

Disclaimer #1 applies to me (I'm using FF3 on the mac.) The animations are slow. I hope for everyone else they're much, much faster.

In summary, your site looks nice, but i can't (from my lack of knowledge) understand what it does. Skimming this post, i think my comments are of limited utility. nevertheless, i'll post 'em. good luck.

Gosh, I remember providing feedback for this site way back when. It's been much improved. Clearly stormpulse is a labor of love and hard work. Congrats.

I disagree. If I had three great hacker friends, I'd brainstorm to find an awesome problem to work on. It's hard to find talent; especially hard to find talent in people I like to work with.

Anyway, I can't think of any good ideas. Good luck.

not for me.

Very interesting. I'm not sure if speedreader improves my reading speed, but I noticed something when applying it to my thesis. It's much harder to speedread poorly written text! So, on a handful of paragraphs, I've concluded that speedreader is a great "debugging" tool.

hugh, you're right.

VCs claim to hate pitches where the founders don't know their market. I never understood why -- until i read this post. Not a single link to prior art, no explanation of why his solution will be better than anything else. no compelling problem to solve.

The author's blog would be better if the author focused on problem 2: "I require a lot of number crunching now and then. time is a premium." Tell us more! He might be onto something, but I can't figure it out.

[I'm sorry for decreasing the signal-to-noise ratio.] Andre is the man.

I don't know for sure. My best guess is they have a calorimeter, a device which measures the irradiance on a surface. The Bodybugg companies then does a series of calibrations to convert the irradiance into the power the body outputs. The power used per (second?) is integrated up over the course of a day, and converted into calories.

Essentially, it's a fancy thermometer.

A favorite startup of mine is bodybugg (http://www.bodybugg.com/). They measure the flux of body heat and determine a person's caloric output. I built some MEMS devices once and was juiced about building a body calorimeter. Too bad I had my idea something like three years after bodybugg went to market :)

Question: Do they have any intention of going public? If not, then what's the point of equity? Profit Sharing?