Junk_Collector

It could, but maybe not if your motto is, "Move Fast and Break Things."

Article is short on data instead referencing a bunch of aggregated IIHS studies.

It even goes so far as to call out the ones who were interfacing with AI as disadvantaged and manipulation of the advanced AI developed for the Chinese orphans led to the creation of the mouse army who were categorically trained to worship specific people as their leader which they otherwise had never known.

Can you build a CNC machine out of nothing but a computer and a CNC machine?

If you live in Austin proper, your local library may have repair meetups as part of the Austin Fix-it program.

From what's described in the article they are using it to write the process code. That is, control code for setting the states of the SOC under test and the test equipment, then recording the data that the test equipment would measure. It can be a pain to do because each SOC and piece of test equipment might have it's own control language, drivers, different data formats, etc. This usually all has to tie back in to a local (self hosting is the norm) cloud service for quality tracking and some 3rd party enterprise software from companies like Cadence. The test equipment would be something like a Keithley Parametric wafer tester, which is actually an entire rack of equipment glued together by 3rd party code with semi-open APIs. It's not uncommon to make thousands of measurements on an SOC during verification and then process engineers work to reduce the measurement count to just the critical ones for manufacturing.

That's a Nintendo Switch. The general purpose docking OS was what Win8 was supposed to be but it was flubbed horribly.

It's worth noting that this isn't new technology. This paper is specifically about how their new technique provides a small but statistically significant improvement on existing techniques.

The fact that they provide code and dataset is really praiseworthy.

Decades ago there was a huge push to green up cities by planting trees everywhere possible. A couple of decades after that there was a huge push to remove trees because of infrastructure and safety concerns. Now a few decade later we are back to putting the trees back in. I'm always for more trees but hopefully this time it's a little more long term this time.

This is as good as when the engineer from the Claude team said they load their website in such a way as to protect against hostile actions such as scraping.

Gotta love how they moved the "Create Email/meeting" buttons in Outlook mobile and stuck the Copilot button there so that you will hit it accidentally.

We have some special cases I can't go too much into that lend themselves well to rolling our own and stripping things down as much as possible.

It's an interesting case to me. The company I work for has been shipping systems on windows since the 90's despite pretty consistent requests from customers to ship hardware on Linux. 2 years ago we started creating our own Linux distribution and this year started shipping products on it. We still ship a lot of stuff on Windows 11, but that market share is starting to shift now. 10 years from now I could see us completely moved to our Linux distro. Now, what's actually interesting is that it wasn't customer requests or efficient capital allocation that drove this. Microsoft effectively forced us to do this against our will by a combination discontinued products and handling of Windows 11 and now that we've spent the capital we won't be going back.

Yup, a lot of scopes actually did this internally and some still do. It's part of why some scopes lose half their BW when you go from 2 ports to 4 ports (some go the other direction and run multiple ports on one very fast ADC), they split the digitizers. It's just very very difficult to keep it working external to the box mainly because of line drift.

If you are an absolute nutcase, you could characterize a set of line stretchers and a multiplexer on a high end VNA then offset the inputs of the 4 channels on that UXR with them, take a capture and finally rebuild a 1TSamp/s signal out of the 4 results.

You have to have the 240V model of the scope to run all four channels at full rate (110GHz) though.

I think you are thinking of this video: https://www.youtube.com/watch?v=DXYje2B04xE

Keysight at least, has a fab where they make their own ADCs. Those are something like ENOB 6, 10 bit raw up to 120GHz and are used in their oscilloscopes but can also be purchased standalone.

Oscilloscopes also have a significant amount of additional front end conditioning, probe control, channel timing, and analysis software built into them. Most of the math functions on oscilloscopes use custom ASICs that work off the raw bits coming from the 120GHz digitizer which is non-trivial even just to receive. Calling it a plastic case around a digitizer is disingenuous.

It's technically not a signal generator but an Arbitrary Waveform Generator. It provides a base-band modulated signal to the signal generator which the sig gen upconverts to the RF carrier. If you purchased a Vector Signal Generator this would be built in but you can still buy them stand alone and they are pretty common. NI, R&S, Tek, and Keysight all have product lines of them.

Another way to think about it, this would be comparable to a signal generator in the same way that an oscilloscope is comparable to a spectrum analyzer.

In the simplest possible terms, EIRP is the equivalent of power density. It takes into account how narrow the beam from your antenna is.

From the article "I agree that a toxicological investigation of this anion would be useful now that we know its identity, but I am not overly worried about my tap water,” says Oliver Jones, Professor of Chemistry at RMIT. “The compound in question is not newly discovered, just newly defined. Its presence in some (not all) drinking waters has been known for over 30 years."

Chloramine has been in broad use for over a hundred years and this breakdown byproduct was well documented over 50 years ago and detectable in water over 30 years ago. What the article is claiming as new, or a "Phantom" is that someone imaged its particular molecular structure and is now requesting funding to run toxicology studies on it. There is no current reason to believe that it is harmful since tens of millions of exposures have not indicated any reactions to it over the past hundred years.

Yotta marketed itself as a "bank" where every time you deposited to savings you would get a free lotto ticket for the month based on how much you deposited. They did this by offering below average interest rates on savings then parking people's money in accounts at banks with higher interest rates than they paid out and pulling some of the difference into a prize pool. Over time (very quickly actually) to increase revenue they pivoted into more traditional gambling.

Notably, Yotta is neither a bank nor a payment processor. They are just an "app" front end. Yotta's processor went bankrupt and the fintech bank they were working with to hold the accounts now disputes the amount of money they actually are holding to the tune of ~$96M being missing. This will probably be in courts for several years while things are unwound, someone will go to jail for financial crimes, and a lot of people will never be made whole. Some people have called for the FDIC to step in, but the FDIC has helpfully pointed out that no FDIC insured account has defaulted which is the necessary condition for FDIC insurance to pay out.

Force cannot transmit through the material faster than the speed of sound and because fundamentally at a subatomic level, mechanical force is the interaction of electromagnetic and gravitational fields between molecules, the speed of sound cannot exceed the speed of light in a material. The rod will compress or physics breaks down. Solid particles are an abstraction.

There used to be some pretty wild published advice on how to use a radial arm saw including ripping full sheets of plywood by walking the sheet across the cutting plane with the saw pointed at your stomach. They also travel towards the operator in the event of a catch because of the direction of the blade and the floating arbor. This makes positioning yourself out of the potential path of the blade critical and the one thing we know is that you can't trust people to be safe on a job site when they are in a hurry.

Bosch did release an actuator-based solution. They got sued by SawStop for patent violations and lost and pulled it from the market. SawStop's main patent just covers the concept of a blade brake, not a specific implementation.

They offered to relinquish one important patent, but they have a huge portfolio of patents covering blade breaks specifically applied to table saws. If you go look at the actual testimony instead of a summarized article, SawStop's representative very explicitly will not even discuss relinquishment of their other patents including their patent on "using electrical signals to detect contact with arbor mounted saws" which does not expire until 2037.

A large part of the testimony was companies such as Grizzly complaining that SawStop is unwilling to engage with them in good faith on licensing their technology. Given SawStop's history, I'm unfortunately inclined to believe them.

Most likely 10 MHz. The reference links to Keysight.com and that's more or less industry standard for compensated directional couplers which are used in the large high performance VNAs. To go lower than that they usually use a directional bridge.

This is coming out of Australia so it wouldn't be ITAR, but they do have their own export restrictions on this sort of technology.

This is very similar to current military optics. It just uses a GaAs meta-material surface instead of a GaAs microbolometer array. Fundamentally they are both semi-conductor microscopic antenna arrays. The abstract plays down current gen by choice of comparisons probably to drive funding interest, and of course the article does what science news articles do.

Not a strictly new technology but an improvement on existing concepts. This is building an artificial non-linear optic using a metamaterial to make it more compact. It works by frequency shifting the incoming infrared into the visible light spectrum without otherwise altering it. Of course it's just a proof of concept metamaterial so there's a bunch of practical limitations that will need to be overcome with engineering before it's ready for prime time.

The actual publication is at https://www.spiedigitallibrary.org/journals/advanced-photoni...

Said another way, you're making a filter. Zeroing out FFT bins is a brickwall filter. Brickwall filters have poor frequency and amplitude accuracy if you are trying to preserve the signal in the passband. A Flattop filter will give maximum amplitude accuracy, a gaussian filter will give good amplitude and excellent frequency accuracy. Other filter types can be implemented to require less computation for resource constrained systems under certain circumstances. Zeroing is the simplest filter to implement in code, but it's performance is essentially the worst from a signals point of view.

I was replying specifically to the "It doesn't matter if we just make enough" idea. For solar panels on a site scale you can use variable pitch panels focused on a solar collector to control your output power if you are peaking to high. Wind can use variable pitch turbine blades. Both of these configurations add a lot of cost but are worth it when talking grid scale generation and aren't uncommon in practice. The actual power you put onto the grid does need to be matched to how much is being used. Storage (hydro is the most popular it doesn't have to be batteries) allows for cheaper generation because you have a lot more options for burning off overshoots and peaks with the benefit of smoothing out dips. Without storage all of this together gives rise to weird things in practice like California selling power at a loss to Arizona and then buying it back because of the combination of subsidies and grid stability.