X13: 60 seconds
X1 and everything from Apple: You’re literally doomed. Complete disassembly required. At least Lenovo documents well how to remove the base cover, battery, mainboard, display…
All of that pain for 1 mm less height and a sharp palmrest.
I surprised how much pain people with Windows can suffer and keep using it. With weird arguments like “I forced to use that application” and “Ans Linux doesn’t do FSR4.1 something”. You decided that you need that?
I worked in an IT repair place for 5 years where we repaired laptops for customers. I can probably count the number of times we got people asking for keyboard swaps. For context of scale, we probably handled 30-70 computers a week, the vast majority of which were “user serviceable” repair jobs
I've also seen a large percentage of MacBook butterfly switch keyboards require a complete return to Apple, for about 2 years.
Regarding the others… respectfully what on earth are you doing to them that you’ve had to replace them that frequently? That’s more often that I replace actual consumeble parts that have real wear like USB cables and the likes.
But a little sticky liquid is enough. A drop of something hard is also enough. I was able to rescue a ThinkPad by popping out a key and clean the mechanism with isopropyl. Another one was sadly killed by the power-button, which got defunct. But a 20 Euro keyboard safes it.
Don’t underestimate how much devices get killed by simple stuff like lose hinges, defective trackpads and so on. People are often careful, often not and usually helpless when it is damaged.
The water holes in the ThinkPads existed for…reasons. But it doesn’t help if people tilt them in sheer panic.
Short: keyboards fail, quite often. They are wear items which should be user replaceable.
The procedure for keyboard replacement should be similar between an X1 and MacBook. They are somehow “layered” to be cheap and flat. It was already a pain with the MacBooks from 2008.
but also fiddley.
If you know what you are doing, and have that spare part including the correct screwdriver and screws in the shelf next to your desk?
How often does your keyboard fail? I've never had that happen in all my computing life and the other parts are usually not that easy to change for any regular person on a laptop. Not sure if that's the scenario to optimize for.
Turn Laptop over, look for the screw holes with a keyboard icon next to it, remove those screws with a Phillips size 1 screwdriver, flip over, open lid, slide keyboard up and lift out, unclip flex cable, then do the reverse steps with the new keyboard.
After a while, Lenovo started using more clips and fewer screws and things started to go downhill from there.
Laptop defunct. Use an external keyboard if not affordable.
Used my X220 for ten years, handled it with care, but after ten years a new keyboard was a nice uplift. You can also switch languages but especially also the layout between ANSI- and ISO.
Buying an Apple device with ANSI in Europe? Pain. ThinkPads? Buy anything. 30 EUR and new keyboard.
... Which are nearly impossible to replace, and are what the modern Thinkpads are trying to emulate.
The old X13's would almost never fail, so replacing them was never a consideration.
(also, screws are not that annoying, but I agree with the rest, most companies aren't/weren't replacing keyboards on laptops)
I might consider switching to an X13, but Lenovo support software is incredibly intrusive, and I've learned to despise windows.
However, I also use a large amount of applications like Touch Designer, which is not available on Linux. I'd much rather own a mac for travel purposes.
I can only recommend to use Linux by wanting Linux. This way you can replace stuff which is holding you back.
Just leaving Windows because Microsoft sucks is often failing, you are still within the vendor lock-in of the applications. The authors only port if they
I made a clear cut and lost my favorite game. Luckily Valve decided some years later to port it natively to Linux.
Which leads to two options: Drop proprietary applications. And spending money on Linux support.
Design applications seem one of the most troublesome areas?
You are literally talking about sacrifices you have made specifically to move to a certain linux OS.
That's not a sacrifice I find acceptable. So I'll switch to Mac instead.