> Our AC plugs are, however, the safest design on the planet.
Not if you step on them with bare feet - those things are worse than LEGO. They could punch through a horse's hoof.
Not if you step on them with bare feet - those things are worse than LEGO. They could punch through a horse's hoof.
Recently a person brought in a laptop that had apparently been accidentally brushed off a desk, whilst closed, and had apparently fallen on an upturned plug. The plug had managed to hit the back of the screen, left quite a dent and spider cracking on the screen. The centre of the cracking did not match the dent ...
I'll have to do some trials but even if a plug is left on the ground, will it actually lie prongs upwards? I'll have to investigate lead torsion and all sorts of effects. Its on the to do list but not very high.
Buy a fused extension cord with more plugs, you have now turned one socket into 4, 6, or 8 sockets. You can even get some that have USB built-in, so you don't use a socket up for a phone or tablet charger. They're not even very expensive.
And in an office, I'm pretty sure all equipment (computers, lights, controls for adjustable desks if you have them), are meant to remain permanently plugged in anyway in a properly installed desk setup. What is going on in your office where you're choosing what is plugged in and what isn't, constantly? And why can't your office manager spring £20 for an extension cord with multiple sockets?
However, some older houses in the UK have far fewer sockets than more modern properties - sometimes only one or two per room.
And sure, if you need to use a hairdryer and a hair straightener a person with an orderly lifestyle might return them both to a cupboard afterwards - but some people don't mind clutter and just leave them wherever.
When it comes to multiway extension leads - people in the UK are sometimes told it's bad to "overload" sockets but have only a vague understanding of what that means, so some people are reluctant to use them.
To be fair, most people work on the assumption that if the consumer unit doesn't complain, then it is fair game. They are relying on modern standards, which nowadays is quite reasonable. I suppose it is good that we can nowadays rely on standards.
However, I have lived in a couple of houses with fuse wire boards, one of which the previous occupants put in a nail for a circuit that kept burning out.
Good practice is to put a low rated fuse - eg 5A (red) into extension leads for most devices. A tuppence part is easy and cheap to replace but if a few devices not involved with room heating/cooling blow a 5A fuse, you need to investigate. A hair dryer, for example, should not blow a 5A fuse.
The only thing I plug in at ground level that isn't semi-permanent is a vacuum. No plugs are left lying around all day.
There's almost a dozen different plug/socket types used in Europe though: https://www.plugsocketmuseum.nl/Overview.html
I will say, you definitely can tread on a German "Schuhko" plug (if it has a flat face) just like a UK one.
Are these prices beyond your means?
there are no uk plugs here so I'm not complaining:)
if keeping everything plugged works for you, awesome!