The same happens when you:
- Install flooring
- Install trim in your own home
- Build / install cabinets
You will now see:
- Odd flooring patterns and uneven floors
- Know what it looks like when trim isn't coped
- Uneven gaps between doors
- Install flooring
- Install trim in your own home
- Build / install cabinets
You will now see:
- Odd flooring patterns and uneven floors
- Know what it looks like when trim isn't coped
- Uneven gaps between doors
Then you have things like flooring, installing windows, and anything on outside, however, where I’ll absolutely make sure it’s perfectly everything. Basically so my floors have none of the issues you describe as an example. Part of the success behind this is to hide the imperfections. You’re not going to ever build a perfect floor if you build it all the way to the wall. So what you do is that you leave a gap between the wall and the floor and you cover that gap up with wooden “footlists” (again not sure if that’s the correct English description). This gives you a “perfect” floor which aligns with everything in the room. The more crooked a room is, the more you have to cheat, but if you put in the effort it’s almost always achievable.I would like the small imperfections in these things as well. Ok, maybe not on the outside unless I was very sure it wouldn’t have an impact on the integrity of weather protection, but I wouldn’t mind crooked floors. The reason I strive to make them perfect is that other people won’t, which will make a property much harder to sell. Because unlike imperfect ”walling”, a floor correction/replacement will absolutely impact the value of a property.
But then there is the part where you will absolutely notice it when it’s not installed correctly. Which is what I guess you’re getting at, and I agree with you. The thing with buildings, however, is that you have to cheat. Buildings are imperfect and they can even more around a bit as weather conditions change. So with buildings you have to cheat. Which is different than with aligning things on the web, or at least it should be. So this is the part I disagree with a little.
As a side note people shouldn’t accept crooked floors and so on, especially not when you’ve hired professionals. They should know how to cheat.
Here in the US, it's called “baseboard”:
https://www.google.com/images?q=baseboard
https://en.wikipedia.org/wiki/Baseboard
“[Baseboard's] purpose is to cover the joint between the wall surface and the floor. It covers the uneven edge of flooring next to the wall; protects the wall from kicks, abrasion, and furniture; and can serve as a decorative molding.”
So much of what happens in house construction is about water management and without understanding it, it’s common for people to create issues. Regularly see patios that cover airbricks, causing suspended timber floors to rot.
"Spartle" = Spachteln? You may trowel your wall (with a trowel full of plaster). At least that's what I do here in Canada.
"Footlist" = Fussleiste? Leiste is not a list. Leiste translated can literally just be "trim" and "foot trim" is quite close - leave out foot and you have what it's actually called. Floor trim, baseboard, baseboard trim (to distinguish from 'baseboard' just meaning 'baseboard heating' if context isn't clear etc).
I think your parent, like you are saying in the end as well, was also less worried about seeing your own imperfections (tho that's of course a thing too) and more in line with the original comment about "not being able to unsee it" in general.
And that is definitely true. You see all the badly hidden imperfections from professionals. And you will also see all the well hidden ones but you still know they're there now while before you did it yourself, you never even noticed. It can also make your relationship with professionals worse because you will see the hiding but have trouble distinguishing the correct line between "well hidden but visible to the professional eye" and "bad job" :)
The word for this is wabi-sabi.
design systems are imperfect, and can become even more so with changing specs/frameworks/dependencies/browser updates/...
I’m curious if other people detect interrupted or irregular patterns so readily. It’s like there’s a part of my brain just looking for anomalies and I can’t turn it off.
It feels like walking through a maze, with an uneven floor and bad lighting, full of dead-ends, compared to walking down a pleasant, well-lit corridor.
My main concern is the writing I see coming out of the Public Relations and Communications departments. Writing is not exactly tangential to those fields.
It wasn't always this way. What has happened?
I suspect it’s all connected to the rise of a professional management class, rather than promotion through the ranks, and management by people who’ve done the work. Nobody who’s in a position to demand better or to make sure the right people are in the right roles, actually knows WTF they’re doing outside of a spreadsheet and PowerPoint.
I am observing a lot of people in high paying jobs who don't have a clue how to do even the basics of their job (like being able to type proficiently in a job that requires written documentation).
Is your shift key... broken? No? Use it please.
“Have you taken the dog out?”
“Yes”
Vs
“Have you taken the dog out?”
“Yes.”
The second comes across as the responder being potentially irritated at the asker. I believe that this comes down to the amount of effort required to type the reply; adding a period is making the explicit choice to do so, whereas not doing so is the default. This isn’t the case for sentences in the middle of a multi-sentence answer, since a separator is needed anyways. But I find myself not adding a period even at the end of multi-sentence messages, and I automatically read any message ending with a period with a different tone than one which does not.
Maybe I’m just nuts though, that’s always an option. But with text being such a relatively limited medium for conveying emotion in short messages, I think this is a reasonable solution.
(1) My phone absolutely tried to correct that back to "grocer's"
I think you're missing the joke of the name!
So "the grocer's apostrophe" makes sense as a phrase referring to a typical individual grocer with a typical atypical apostrophe, standing in as a representative for all grocers and all their darned grocers' apostrophes.
Most people are able to naturally filter out most of it. You’re just a little less equipped to. People with ADHD have similar problems.
Psychedelics remove most of those filters, causing someone’s brain to get the raw data including all the anomalies in the processing, which makes patterns (visual and mental) both suddenly much more apparent and do weird things :)
All the time, and I learned to not care a lot, even like some; for instance there's a lot of (mostly abstract, surrealism) art which does all the things wrong on that front but which is extremely enjoyable to me. Same weird way with music: exact 4/4 stuff is mostly boring, often even annoying, but give me funky off-beat stuff, chaos and noise and it brings a smile to my face.
There's only one thing which I can't shake off and that's lines which are meant to be, but aren't eaxcatly, parallel or right angles. Can keep staring at those. Especially when they are like very close to being correct but look like they're off (for like 1mm over 1m). Not the first time I actually get up and take a ruler to verify.
Like one part of the article shows the Apple logo in a circle, and the correct centering is not to have all points on the logo equidistant from the circle, but to allow the leaf to go a lot closer than the rest.
Very much in line with being neurodivergent.
Sounds more like autism than ADHD, but it's hard for me to tell, 'cause I'm both[1].
I was about to write: As someone late-diagnosed[1] with ADHD[2] and discovering they're autistic, ... -
>Once I was diagnosed with autism, this tendency of mine made a lot more sense.
...yup. This is what I was a about to write.
>I’m curious if other people detect interrupted or irregular patterns so readily. It’s like there’s a part of my brain just looking for anomalies and I can’t turn it off.
The answers to that are no and yes, that's the blessing and the curse of autism.
Seeking and recognizing patterns is one of the defining traits.
_____
[1] https://romankogan.net/adhd#Diagnosis
[2] https://romankogan.net/adhd/#Awfully%20Described%20Human%20D...
/rant
Does anyone else who comes into the house notice anything? Very unlikely unless they are craftspeople.
What greeted me was an uneven landscape of tiles that the naked eye just didn't see.
That laser level actually revealed plenty of places around the apartment I dare not look at anymore, lest I get annoyed at the contractors... and the original builders of the block.
I just patched a whole bunch of drywall cutouts after having some electrical work done. Now I when I look at a new construction house, I can tell which builders use go cheap on drywall, esp. when there's too much texture.
Then you have the same scenario but top to bottom.
A few suggestions for your tool. Add millimeters as an option. I'm using 12"x24" tile for the floor but they're really 300mm x 600mm. I learned most 12"x24" are that size. Another thing I learned is with that size it's recommended to use a 33% offset pattern. This guy explains it well https://www.diytileguy.com/12x24-tile/