Hacker News Reader

Comment by izacus | Hacker News Reader

Having a few APs to cover a house is far from"advanced" setup.

We live in times where lawn movers need wifi.

If you need 6 or more unifi devices, that's quite advanced. And quite a large area. If you have such a big house and also need WiFi for your fancy lawn mower, I can't shed a tear for the 149 USD budget unifi decice not being adequate for you.

This.

I have a pretty large house and I would be fine with this - I have three AP's and a 48 port PoE switch for the 36 drops in my house.

2 floor house + Outside is immediately 3 APs. You'll also need at least one PoE switch to power them. That's 4 devices already, without adding anything else like security cameras or similar.

Yeah so it’s not the device for you and you buy the another higher model in the line up?

or you buy a different product from a different vendor, due to dissatisfaction with artificial product tiering.

isn’t that typically the implicit message being sent by disgruntled customers complaining about a company’s seeming lack of foresight or excess of greed, or both?

The Dream Machine Router which can do way more is only $50 more...

We live in a 3 floor 1800 sq.ft. house, with have a garage that is 300 ft away. My single UAP-AC-LR manages to cover this quite nicely, only the far corner of the garage has poor connection, out in the garden it's excellent.

Unless all the walls in your house are heavily reinforced concrete, I don't see how you need that many APs.

Are you using 2.4 or 5ghz? 2.4 will blast through walls, to an extent, where 5ghz will struggle. I’ve seen situations where the 2.4 band is completely saturated by neighbors and the solution was that every other room needs its own 5ghz puddle to achieve top speeds.

This kind of setup is easily achievable with UniFI POE gear, but will hit the 5 device limit of this router. The original USG didn’t have this limit.

What is your house built of? In the UK, we’ve got houses with brick walls everywhere - it’s killer for signal.

I live in a wooden house, which is kind of ideal yes. You say brick, which isn't actually that bad, if you reference the classic NIST report [1].

And even in a brick house a lot of the interior walls are still just plywood or drywall, even in the UK AFAIK.

What is interesting though is that OP said it is sufficient with one AP per floor plus one outside. So apparently propagation within one floor is fine, but between floors or to the exterior is not. In that case, it has to be a building where the interior walls are mostly just drywall, and the exterior walls and floor slabs are reinforced concrete with little in terms of openings. Which sounds more like an apartment building than anything else?

[1] https://www.nist.gov/publications/electromagnetic-signal-att...

I think it depends largely on age - “new builds” (1980s onwards) often have a brick partition wall down the middle and the rest plaster/wood stud. The last couple of houses (significantly older) I’ve lived in have been pretty much all brick walls.

We’ve got 3 UniFi APs downstairs here, 2 up. There are still things on the periphery that only just cling on, and when you’ve got stuff like that it takes a lot of airtime.

Over here houses typically are built with reinforced concrete floors, and double brick walls. Also, building up instead of out is normal, so many have a basement, ground floor and 2 upper levels.

Having one AP per floor is normal for coverage, so that would be 4 to serve the inside.

Most people don't have any need for a PoE managed switch. You just get a basic PoE switch if you have APs to power, it's cheaper and simpler.

I guarantee you approximately everyone that does not work in tech has one AP, the one provided by their ISP. Unifi already has a range of prosumer products, this is them moving into the consumer space.

The limitation is totally product segmentation, since their prosumer equivalent all in one (the UDR) costs double, but that's fine, I feel. It's not like they're raising the price of the existing offerings because this budget model exists.

I know so many people who don't work in tech - some who work in blue collar jobs, in fact - that have Eero or Orbi or similar easy to use network extenders set up. Wanting to have wifi coverage away from the ISP-provided router isn't something that only tech insiders desire.

> I guarantee you approximately everyone that does not work in tech has one AP, the one provided by their ISP. Unifi already has a range of prosumer products, this is them moving into the consumer space.

I'm not sure what are you trying to say with this - yes, obviously, people who don't buy extra APs don't have extra APs, but why are they relevant to conversation about UniFi prosumer products?

It's not like UniFi customer base is a person who doesn't use anything outside their ISP equpiment.

This isn't a prosumer product. You aren't adding these to an existing Unifi install. The prosumer version of this device is the UDR. This is Unifi releasing a cheap consumer product so when you, as a person who knows their tech stack, need to suggest a all in one device for someone who would otherwise have just an ISP router, there is a product that costs in the same price range as the netgears and tp-link devices in that range. Or when someone curious about upgrading from the bargain basement tier to mid range equipment has a new cheaper entry level product which might encourage them to try.

This absolutely is a prosumer product - by your own sentence: normal customers do not buy routers and APs like this. They use their ISP gear with maybe something much cheaper added once in a while.

This is prosumer. they have a consumer brand already: https://amplifi.com/

Google fiber and ATT both give out 2 WAPs in my area which will auto-mesh.

Reply on news.ycombinator.com