What’s an example of a system that requires hard real time and couldn’t cope with soft real time on a 3GHz system having 1000 cycle misses costing 0.3us?
Perhaps even that's not an example of such a system, 0.3 microseconds is close to the allowable real-time budget, and QC would probably not scrap a $20k part if you were off by that much once.
But in practice, every time I've heard "soft real time" suggested, the failure mode is not a sub-microsecond miss but a 100 millisecond plus deadlock, where a hardware watchdog would be needed to drop the whole system offline and probably crash the tool (hopefully fusing at the tool instead of destroying spindle bearings, axis ball screws, or motors and gearboxes) and scrap the part.
I’m trying to understand where the roadblock on a rPi + small FPGA hybrid board for $50 fails at the task… and it sounds like the OS/firmware doesn’t suffice. (Or a SoC, like a Zynq.)
Eg, if we could guarantee that the 1.5GHz core won’t “be off” by more than 1us on responding and the FPGA can manage IO directly to buffer out (some of) the jitter, then the cost of many hobby systems with “(still not quite) hard” real time systems would come down to reasonable.
Hobby systems like a small CNC mill or lathe usually don't need anything near 1µs (or better) max jitter. LinuxCNC (derived from NIST's Enhanced Machine Controller, name changed due to legal threats) runs fine on preempt-rt with control loops around 1kHz, with some systems you can also run a "fast" thread with say 20kHz and more to generate stepper motor signals, but that job is best left for the FPGA or an additional µC IMHO.
But it's not really so much about being fast, it's about being able to guarantee that your system can respond to an event within a given amount of time every time. (At least that is how a friend who works in embedded/real time explained it to me.)
Any system that deadlocks.