The 32-bit aligned instruction assumption is probably baked into their low-level caches, branch predictors etc. That might mean much more significant work for switching to 16-bit instructions than they are willing to do.
Though, I suspect that's easy problem to fix. The more pressing issue is what happens after the decoders. I understand this is a very wide design, decoding say 10 instructions per cycle.
There might be a single 16bit instruction in the middle of that block 40 bytes, changing the alignment halfway though. To keep the same throughput, Qualcomm now need 20 decoders, one attempting to decode on every 16bit boundary. The extra decoders waste power and die space.
Even worse, they somehow need to collect the first 10 valid instructions from those 20 decoders. I really doubt they have enough slack to do that inside the decode stage, or the next stage, so Qualcomm might find them selves adding an entire extra pipeline stage, (probably before decode, so they can have 20 simpler length decoders feeding into 10 full decoders on the next) just to deal with possible misaligned instructions.
I don't know how flexible their design is, it's quite possible adding an entire extra pipeline stage is a big deal. Much bigger than just rewriting the instruction decoders to 32bit RISC-V.
> I don't know how flexible their design is, it's quite possible adding an entire extra pipeline stage is a big deal. Much bigger than just rewriting the instruction decoders to 32bit RISC-V.
I'm sure it is legitimately simpler for them. I'm not sure we should bend over backwards and bring down the rest of the industry because they don't want to do it. Veyron, Tenstorrent were showing off high perf designs with RV-C.
For an 8-wide or 10-wide design, the propagation delays are getting too long to do it in all in single cycle. So you need the extra pipeline stage. The longer pipeline translates to more cycles wasted on branch mispredits.
RISC-V code is only about 6-14% denser than Aarch64 [1], I'm really not sure the extra complexity is worth it. Especially since Aarch64 still ends up with a lower instruction count, so it will be faster whenever you are decode limited instead of icache limited.
> Adding complexity to the I$ hasn't even made sense for x86 in two decades
Hang on. Limiting the Icache to only 32bit aligned access actually simplifies it.
And since the NUVIA core was originally an aarch64 core, why wouldn't they optimise for hardcoded 32bit alignment and get a slightly smaller Icache?
Even x86 only reads 16 or 32 byte aligned fields out of the I$, then shifts them. There's not extra I$ complexity. You still have to do that shift at some point, in case you don't jump 32 byte aligned address. You also ideally don't want to only hit peak decode bandwidth starting on aligned 32 byte program counters, so that whole shift register thing is pretty much a requirement. And that's where most of the propagation delays are.
> RISC-V code is only about 6-14% denser than Aarch64 [1], I'm really not sure the extra complexity is worth it. Especially since Aarch64 still ends up with a lower instruction count, so it will be faster whenever you are decode limited instead of icache limited.
There's heavy use of fusion, and fwiw, the M1 also heavily fuses into micro ops too (and I'm sure the AArch64 morph of NUVIA's cores do too).
https://en.wikibooks.org/wiki/MIPS_Assembly/Instruction_Form...
https://valsamaras.medium.com/arm-64-assembly-series-branch-...
And it's not only a way of decreasing code size. It help with security too. If you can have an innocuous looking bit of binary starting at address X that turns into a piece of malware if you dump to instruction X+1 that's a serious problem.
https://mainisusuallyafunction.blogspot.com/2012/11/attackin...
RISC-V, I'm pretty sure, enforces 16 bit alignment and is self synchronizing so it doesn't suffer from this despite being variable length. But if it allowed the PC to be pointed at an instruction with a 1 byte offset then it might be.
As far as I'm aware every RISC ISA that's had any commercial succss does this. HP RISC, SPARC, POWER, MIPS, Arm, RISC-V, etc.
> It help with security too. If you can have an innocuous looking bit of binary starting at address X that turns into a piece of malware if you dump to instruction X+1 that's a serious problem.
JIT spraying attacks work just fine on aligned architectures too, hence why Linux hardened the AArch64 BPF JIT as well: https://linux-kernel.vger.kernel.narkive.com/M0Qk08uz/patch-...
Additionally, MIPS these days has a compressed extension to their ISA too, heavily inspired by RV-C. https://mips.com/products/architectures/nanomips/
And NanoMips requires instructions to be word aligned just like everybody else, it's just that it requires 16 bit alignment rather than 32. Attempting to access an odd PC address will result in an access error according to this:
https://s3-eu-west-1.amazonaws.com/downloads-mips/I7200/I720...
That's the same as RV-C.
I don't have a strong opinion on whether the C extension is a net good or bad for high performance designs, but I do strongly believe that it comes with costs as well as benefits.
https://project-archive.inf.ed.ac.uk/ug4/20191424/ug4_proj.p...
Since then, RISC-V has added a bunch more instructions that ARM/x86 already had which has made RISC-V even smaller relative to them.