The Teflon tape is only to be used as a friction modifier as NPT and other tapered threads seal on the threads. Reduced friction means that you can get enough load to deform the metal threads and create a seal. Be careful to not add tape to the first 2 threads as small pieces of Teflon tape can break off and get stuck into valves and things within appliances causing them to leak. There is nothing wrong with pipe dope and I find it to be superior though messy.

Annoyance for those in the states: Big box stores used to advertise fittings as NPT (National pipe thread). NPT being an ANSI spec. They seem to have switched to MIP and FIP for Male Iron Pipe and Female Iron Pipe. These are NPT as well but with a new name? Perhaps they are looking to avoid holding themselves to the spec?

Lead content in brass drinking water rated piping and fittings are being phazed out for obvious reasons. New low lead brass is stronger and does not deform as easily as the older leaded brass fittings. The result is that some fittings are now more difficult to tighten untill leak free.

Pex and crimped copper fittings are not without there own issues. Relying on an o-ring with a 30 year shelf life is problematic when the pipe is behind drywall.

Perhaps one day we will get laser welded copper fittings.