Normally this is factored into the Rack you buy from a hardware provider, they will tell you that you have 10A or 16A on each feed, if you exceed that: it will work, but you are overloading their feed and they might complain about it.
Normally this is factored into the Rack you buy from a hardware provider, they will tell you that you have 10A or 16A on each feed, if you exceed that: it will work, but you are overloading their feed and they might complain about it.
Obviously people can operate things however they want, but you wont get a tier 3 classification with that setup.
But, point taken: yes your power feed should be running at <50%. But that just means you treat 50% as 100% just like any resource.
Mostly this is outsourced to the datacenter provider; they'll give you a per side rating. (usually 10A or 16A) which also matches the cooling profile of the cabinet.
However, with their comment DC == Data Center, not Direct Current.
DC = Datacenter? makes no sense, so my head replaced it with "Power Supply" instead of "DC Supply", second sentence does make sense as being datacenter though.