I started having problems with RSI about five years ago, and I tried and failed to get relief from quite a few different things, including the Mindbody Prescription, but what ultimately helped me the most was arm and grip exercises: pull ups, deadlifts, farmer's walks.
If you're going to do _anything_ for 8 hours a day, even sitting, you should be taking measures to make sure it doesn't impact your health.
Lifting weights has the best return on time invested I've experienced, period. You can make progress and eliminate 90% of physical discomfort with 3 hours in the gym a week. All you really need are the main compounds. Throw in a couple cardio sessions if you're feeling ambitious and you will gift yourself years back onto your life and avoid all sorts of aches and pains.
When the parent said compound lifts they were referring to lifts that (when you are doing them heavy and correctly) are whole body exercises: Deadlifts, squats, and bench are the three main lifts. Programs will typically mix in some other lifts to round out the program a little like power cleans, overhead press, and bent over rows.
Most beginner strength programs are three days a week, I've found most people do Monday, Wednesday, Friday, but it's flexible as long as you have at least one rest day in between workout days. If you don't mess around and just go to the gym to work you can easily be done in 30-45 mins so under 3 hours a week is very realistic.
You will absolutely feel uncomfortable when you start. Everyone does. Read a lot about form and pay attention to yours (gyms have lots of mirrors, lift near some especially when you're starting out). It's really easy to hurt yourself once the weight increases if you have bad form. Consider getting a good personal trainer to teach you the fundamentals of the lifts.
Remember to eat well and make sure you get enough protein, otherwise it's hard to follow the program.
* = https://play.google.com/store/apps/details?id=com.shabu.star...
Also, you need to be doing them on a lifting platform for the end of the lift, when you have to drop the weight all the way to the floor. Not too many gyms (in the UK, at least) seem to have these.
That being said, I'm sure I have bugs in some of the exercises, I try to work them out via. videos and focusing on technique before I put more weight on the bar.
All the gyms I've been to here in Denmark have lifting platforms, squat racks, etc. so that hasn't been a problem for me.
They have a 'how to post a form check' guide: https://www.reddit.com/r/Fitness/wiki/rules#wiki_2._how_to_p...
I'm an old school gym guy—squats, deadlifts, bench, pullups. I got curious about kettlebells a couple months ago after seeing how well they seemed to work on people I know who have used them. Now, after buying 3 kettlebells and a home pull up bar, I'm feeling pretty decent about sticking with these for the foreseeable future.
Lifting with them is far more ergonomic than using a barbell. Sure, you can't load as much weight but the payoff is that you are manipulating the weight through a larger range of motion. Pavel Tsatsouline's book was what I went with for the movements and of course there's endless content on YouTube showing the proper form. If I were really going hard, I'd do KBs four times per week and finish with a heavy barbell lift at the gym, but the laziness has taken over and I'd rather work out in my living room than walk to the gym.
Like anything, take it with a grain of salt but I have long been a skeptic of faddish exercise and these have been working great for me.
It kind of comes down to how much variation you want in your routine, and if you are focusing on body building or strength (or both).
Personally I started with Strong Lifts 5x5 which is a good intro. Has it's own app, easy to follow, and the guy who developed the program has a great website with video tutorials and written instructions for each lift. Personally I found it to be too much squatting (you do 5 sets of 5 squats every time you go, which adds up quick).
I then moved on to Greyskill LP, which is similar but instead of doing 5x5 for every lift you do 2 sets of 5 and then the last set until (almost) failure. I mixed in a bunch of accessories as well. Overall I felt this was yielding the same results as 5x5 but with less time spent in the gym each time. (once you start hitting the upper end of your strength, 5x5 begins to take between 1.5 - 2 hours each time when you account for warm ups and rest periods).
I have recently switched to 5/3/1 which is more for building mass than strength, and is a bit more complicated to keep track of.
reddit/r/fitness has a ton of good resources. It's easy to get lost in the weeds, but as long as you're hitting your main lifts and doing at least 3 sets of each, adding weight each time, you will make progress. Don't get too bogged down in adding accessories, as they are meant to help improve your weak areas when you get stuck on the main lifts.
Note to new lifters: Most important tool to buy is a spiral notebook and ballpoint pen; plan out all your exercises, sets, and weights before going to the gym, do reps for each set till muscle failure then write down the number of reps achieved, and use that historical set data to design next gym visit, this is the worlds simplest lifting program.
Another general note about "programs" is lifting is much like diet in that there are some plans that are very simple and some that are very complicated and both CAN work well although which works best for which person requires experiment. For example there are extremely complicated diet programs with incredible attention to detail and discipline, and then there's "Don't eat it if your ancestors couldn't eat it" and both can work very well (although one sells many more books than the other...).
Likewise the ridiculous simple workout plan is, on the short term, do about three sets with a five minute break in between, a warmup, max, and somewhat less than max, and on the long term plan your workouts such that you get muscle failure at over a dozen reps on the warmup set, and about 7 reps on the max set and 3rd set. Barrels of ink have been spilled on the topic of do two sets vs three sets or aim for muscle failure at exactly 15 for warmup as opposed to 12 or power lifters should max at 4 reps vs body builders should max at precisely 9 reps. All of which is probably true for various individuals in various situations. A better use of your time than reading and researching all that, is make very small changes to that, then look at your spiral notebook and see what is working for you personally.
The only other programs or rules to follow apply to all plans, its very hard to hurt yourself by moving too smooth, or too light of a weight, but the opposite is not true.
Note: I see Starting Strength recommended here too, which I've also heard good things about from my experienced weightlifting friends. I think they're very similar programs, and that book has a lot of good detail on technique.
If you are over 35 (and sedentary), I'd really recommend reading "The Barbell Prescription" https://www.amazon.com/Barbell-Prescription-Strength-Trainin... — it will be a much better guide than most advice available online, which seems to be directed at youngsters.
I'd argue that at the novice range the extra two sets of volume aren't required - you will literally adapt to anything at this point. That's why there are so many programs that people feel great on for the first three months before they stop making progress. I do, however, like the row instead of the power clean, as many gyms don't have a setup for a power clean, and it's a technically challenging movement. Many years ago when I first started I did starting strength with a row substituted for the power clean, and that took me a good 8 months before I stopped making progress, at which point I jumped over to a 5x5 intermediate program.
There's a subreddit for it and similar routines created by the same guy, too: /r/gzcl
It only requires 3 days/week at the gym and around 1hr per day
Poor form can cause long term injuries, soft tissue damage, or even arthritis.
3 sets of 12 reps descending / ascending of:
* frog jumps - plank pushups
* reverse lunge with overhead press - spiderman crawls
* burpees - leg raise sit ups
Eg: do 12 reps of of frog jumps and one rep of pushups, then immediately do 11 reps of frog jumps and 2 reps of pushups, etc down to 1 rep of frog jumps and 12 reps of pushup. NO resting in between. When done, take a two minute rest, then immediately start the next set. The key to this routine is not resting, and maintaining good form. It offers me a great burning sensation when I do it correctly, and I'm done in less than 25 minutes flat.
If you're gonna do it, do it properly.
Taking up bouldering / rock climbing and doing that once or twice a week has improved my grip strength a lot, with the added bonus that I don't remember having any more RSI pain since I started doing it regularly.
So I definitely agree with the original post that environment makes a huge difference, and with this comment about strength training. And I'll say that rock climbing is awesome for improving your grip strength.
Edit: With that comes the caveat that pro rock climbers are more likely to develop arthritis earlier than the average person.. You have to be careful with how you load different parts of your body, and I'd argue it's easier to injure yourself than e.g. doing weights in the gym, if you're not careful.
I similarly switched to trackball mouse and keyboard without num pad (I was already on vim).
But what helped me more than anything was a keyboard tray that goes below the desk, almost on your lap.
Whenever we move offices at work, it sometimes takes a day or two before the tray is installed and I notice that the discomfort starts coming back quickly.
vim support in IntelliJ is pretty good these days so that's a huge help too. I had to abandon emacs and my claw movements early in life...
Tavis Rudd in this Programming by Voice video thought his rock climbing helped prevent issues before he got RSI.
I’ve cataloged lots of solutions:
Any issue with doing them with dumbbells v.s. something slightly longer? Imagining the range of motion I feel like the dumbbells may sway and feel awkward.
I think this explains the effect where a guy starts lifting and the pain goes away in a week, although it takes a little while longer than a week to obtain a professional powerlifter physique.
Something to consider is bro-science in lifting, which is rampant. I machine/circuit train lift because the odds of going out with a back injury from freeweight squatting is maybe 10% annually, but the odds of injury on the machines is approximately zero. If your whole point of lifting is becoming a world class athlete then you MUST freeweight and accept you'll spend some time in the ER and hospital due to injury because the machines don't have the capacity; I max out the leg press at 400 while the freeweight guys at the gym do much more. On the other hand if you merely want to be the strongest healthiest guy you know outside of the gym or want to prevent injury or improve lifestyle in general, the machines are more than good enough. Basically freeweights are for people trying to win a competition (and there's nothing wrong with that) whereas the machines are for injury and lifestyle improvement, so pick the right tool for the job. On the topic of bro-science, unless you're putting in lumberjack levels of effort and superman strength, ignore all the supplement and diet advice specific to lifting; I started doing bicep curls with 50 pounds and you don't need to eat 17 raw eggs per day or take 42 pills per day to curl 50 pounds, the exotic stuff is for people performing exotic activities. If you're trying to lose weight, its true that you can't outrun a fork, but weight lifting is an entirely different topic than either weight loss or aerobics, so bro-science for aerobics people or fat people isn't relevant ... although you probably should be eating paleo / low carb regardless of exercise routine.
"a back injury from freeweight squatting is maybe 10% annually, but the odds of injury on the machines is approximately zero"
Got a cite for this? My pure N=1 experience is that I've only ever been injured on machines forcing the body into unnatural movement patterns, while I've been squatting for 10 years with no issues. Sure I only squat a few hundred pounds, not like the 1000+ lb monsters.
Squats actually require a lot of hamstring flexibility to perform correctly, and most people don't have that. The basic compound lifts are generally very technically challenging and can take years to master. If you approach it like a meathead, don't be surprised when you get meathead injuries.
The point about injuries, especially for squatting, is definitely a good one though. Although I would want to ask an expert about it.
This is why pistol squats are worth more than just a body weight * x two-legged squat. This is why yoga is valuable for more than just flexibility.
Isolation of a muscle is all great and can make you look strong, but your body is actually a non-trivial network of muscles distributed across your entire body.
Unless your aim is to lift a big number or look big in a specific way, a gymnasts are a better proxy for balanced strength and they rarely do more than BWEs.
Personally, I do love a good old fashioned barbell squat though...
I'm trying to think of a machine I used today with a "track" where the track would be unavoidable via other exercise or bad. For the leg press I don't want my knee flexing sideways if at all possible but my hips and ankles are movable so kinetically in an engineering force diagram how would my knees "know" that my back was pushing against essentially a chair as opposed to pushing to stand up? If for the sake of argument I accepted that my knees have stabilizing muscles etc, you and I know via cognition and vision that my back was pushing a chair up a track, but from an engineering stress and strain diagram my knees aren't sentient and can't know the difference. The bicep machine and pec fly machine and leg extension machine have a ridiculous array of ball bearings and axles such that I'm only constrained in the circular force direction and the other axes are free over at least a small range, think of like how a car suspension has the wheels continue to turn regardless of the angle the suspension components are hanging at; I could design an inferior machine to do pec fly but my gym thankfully doesn't own one like that...
The row machine is interesting in that via the magic of cables its even less constrained than the oars on my little rowboat where I actually use rowing muscles IRL... The lat pulldown is similar in that if I were to climb a tree I'd be more constrained than I am in the machine...
The leg press is another example of the trig not "working" in that if your lifting form is any good there won't be more than a couple pounds of sideways vector force on your knees if lifting free weights, so putting low/zero side load on the knee in a leg press machine is the same force on the knee. If you run the math on the forces the stabilizing forces are very small with proper free weight form... stand on one leg and hold the other leg out 20 degrees the force on my knee should be mathematically larger than a dead lift freeweight or a leg press.
Furthermore there is infinite ink spilled on the topic of proper form for freeweight lifting, but real world muscle use rarely permits perfect freeweight form, simplifying it to the same problem.
Surely, if machines provided an inferior more dangerous higher risk of injury workout, then people would use free weights to recover from machine injuries, yet that never happens, so inductively I find it highly unlikely.
In regular life I don't want to lift heavy objects. I like the general health benefits and stress reduction and bone density of lifting, I'm not training specifically to deadlift car engine blocks instead of using an engine hoist like a normal person. There are probably people training specifically for vocational purposes where that wouldn't apply, soldiers perhaps.