tl;dr You may need an N wifi router or better that is rock solid to make things run smooth.
tl;dr You may need an N wifi router or better that is rock solid to make things run smooth.
Bought my N450 router right when AC was first coming out, it has been great.
"Members of the OpenWrt team have been in contact with Linksys for a while, discussing collaboration on device support in OpenWrt. There had been no technical collaboration on device support until Belkin engineers posted a few incomplete patches in early April. These patches are currently being cleaned up, as they do not meet our quality standards.
The most important part that is still missing is a usable driver for the Marvell 802.11ac wireless chipset. Belkin is working on fixing this, but they have not given us an estimation on when such a driver will be provided.
The default firmware for this device seems to be using a proprietary driver provided by Marvell, which uses non-standard APIs for configuration. We don't know if Marvell will open source this driver, or will work on an alternative Linux driver. We believe that both approaches require a considerable amount of effort and time."
I used to run OpenWRT beforehand, but even after lots of configuring, I basically just ended up at a place that this system gives me out of the box. If I really wanted to, I could enable telnet and install the cyanogenmod-like "Freetz" OS on the machine [1]
If you can't get WiFi to perform, don't be surprised, but it isn't impossible.
Just remember to turn off your bluetooth stuff, my connection was terrible at first and I'm pretty sure shutting down my active bluetooth connections are what fixed it. (Alas, if only my client was 5GHz)
P.S. My rendering machine is always wired through powerline, so my setup does have an advantage in that the rendering machine isn't competing for wireless bandwidth with the client!