But in reality, storing all of that brine would be a massive undertaking on its own. The largest salt cavern is 37M barrels which equates to a circular pond that's 600m across and 20m deep. That's huge. And of course you don't want the brine seeping into the ground water so it needs a good liner. But I suppose you really don't need a pond that big, how often are we completely draining the cavern anyway? We're at half capacity right now and that's the lowest it's been in 50 years. Normally it's been much much higher. So you really don't need all that brine, just enough for the normal ebb and flow of the reserves, maybe like 10%. In the event the reserves get drained, divert some freshwater to compensate.
Salt does not burn, unlike oil. It would be sufficient to store dry salt, and prepare the brine during the pumping. Still a lot of hassle, of course.
> It would be sufficient to store dry salt
Absolutely impractical. Storing and moving around solids in the megatons is very difficult compared to liquids that can be pumped. For comparison, the absolute largest solids moving operation in the world is a copper mine in Chile, it moves 300,000 metric tonne of mineral per day. The east-west pipeline in Saudi Arabia can move three times that in liquid, 1,000,000 metric tonne per day.
Here’s one in the USA:
https://youtube.com/shorts/zXzvUKXhMBo
Here’s a list of salt mines in the USA:
https://en.wikipedia.org/wiki/Category:Salt_mines_in_the_Uni...
When they first built the SPR, they filled it with water to wash away any easily-dissolvable salt features as well as any impurities inside the cavern. The result of filling the cavern and letting it sit for a while is saturated brine: eventually all the salt that can be dissolved is dissolved. Then they pumped that brine to aboveground brine ponds.
Those brine ponds contain exactly the amount of salt water needed to completely fill the cavern with saturated brine. So future drawdowns just use the same water that has already been saturated. Some of the water will evaporate on the surface, leaving behind salt crystals at the edges of the brine pond, but the crucial thing to remember is the quantity of salt in the newly created brine pond is equal to the amount of salt needed to generate enough saturated brine to completely fill the cavern. Because that's where it came from in the first place. So if you need to replenish it with more water, you just pump in fresh water, it dissolves the extra salt in the brine pond, filter out any surface guck, and then pump it back into the cabin.
Periodically you might want to add a little extra salt if say the cavern expands or wind erosion carries salt away from the dry brine pond bed. But this quantity is much less, it's the delta in cavern size, not the full initial size of the cavern.