I’ve been a big Lenovo fan, settled on the X1 carbon. I’ve had three of them, G5, G6 and G9. The USB-C port broke on both G6 and G9 models. Apparently it’s a common problem. Unfortunately the ports are soldered directly on the motherboard making it difficult to fix(should be a small separate board for easy replacement). I was going to desolder and replace the ports, but haven’t gotten around to it.
I’m now using a MacBook Pro M2.
As long as you pay for Apple Care, not a problem. But maybe not the point…
With my old iPhone 12, 2019 16-inch MBP or my 2022 MBA? Not a single issue. The housing is simply constructed so tight and, being made of solid metal, rigid that the housing bears the torsion load and not the tiny PCB solder pads.
The only problem I have with my new USB-C iPhone 15 is that it is hard to clean pocket lint out of the socket, compared to the old Lightning connector.
What are you doing to these machines?! I work in the safety and security biz, including in the field, and my trusty HP EliteBook 2730p is still rocking along on its first USB ports. That machine is over 15 bloody years old!
I never needed one, but a good USB-C adapter (or maybe even small dock) with power passthrough should solve this. Burning through whole machines because a single USB-C port cakes out after just three years is an awful lot of waste.
Mostly, keeping them in my pocket with a USB cable attached to a power bank. Places an awful lot of torsion force on the connector. I tend to go through 2-3 charges a day.
Another issue is that I have cats that like to play with everything being too close to a table corner.
For 90% of the parts it’s honestly pretty easy to work with. You just need a few screwdrivers. And I sourced all my parts from eBay.
The documentation is excellent:
https://support.apple.com/en-us/100586
The only thing that’s egregious is the batteries. They tape the batteries to the case, and to remove them you have to do this complex twirling motion with tweezers to pull the tape out from under the battery. If the tape snaps during this then the documentation basically says get a new case.