Advantages:
- Not subject to the price and supply chain volatility of rare earth permanent magnets.
- For highway dominant drive cycles, the cycle efficiency of EESMs can be higher than state of the art IPMSMs. EESMs tend to have their best efficiency at moderate torques and high speeds because of their excellent field weakening characteristics. I tend to think that they would be a good fit for application in class 8 trucks or as auxiliary motors in automobiles with two powered axles.
- The output torque doesn't necessarily decrease with rotor temperature. In IPMSMs the permanent magnet flux linkage decreases with rotor temperature.
- At least theoretically, with proper control, it is possible to operate EESMs with unity power factor and decrease the kVA rating of the stator inverter.
- If there is a stator inverter fault, there are schemes to denergize the rotor which have some safety implications.
Disadvantages:
- DC current needs to be transferred to the rotating field winding. For automotive applications this tends to be done either with brushes and slip rings or brushlessly using a high frequency transformer with a rotating rectifier. In either case additional power electronics and other components are needed for the field power transfer and control which reduces some of the potential cost savings of the elimination of the permanent magnets. If brushes and slip rings are used with oil spray/oil jet cooling of the rotor they need to be sealed in a separate compartment. I am a little surprised that Renault has stuck with brushes and slip rings versus an inductive high frequency transformer solution. I think this has limited their power density.
- For very torque dense machines, cooling the rotor field winding is challenging, and in my opinion is best accomplished by oil spray/oil jet cooling.
- It is difficult to reach the same maximum speeds as IPMSMs in an automotive package size. The rotor field winding retention system to keep the field turns from moving into the airgap at high speeds needs considerable attention during the design.
- The overall axial length of the non-active region of EESMs is typically longer than IPMSMs because of the field winding end turns and field excitation system.
- EESM efficiency is dominated by the manufacturable slot fill of the field winding.
- High performance current/torque regulation is considerably more difficult.
High performance EESMs have been used in aerospace generator applications for decades, albeit with a different rotor excitation system than what is used in automotive applications. Renault (and their supplier Continental) really led the commercialization of EESMs into automotive mass production. Now BMW has followed suit and multiple suppliers have EESM designs (Mahle, ZF, etc.) GM had a really nice EESM design and high frequency transformer excitation which they published back in 2014. My colleagues and I built several generations of EESMs as part of U.S. Dept. of Energy projects (https://www.osti.gov/servlets/purl/1837809) and I think they have their place as EV traction motors for certain applications.