I'm interested in audio out because I dabble in musical instruments.
What's the state of Bluetooth audio out on microcontrollers? Is low latency and high quality output possible?
What's the state of Bluetooth audio out on microcontrollers? Is low latency and high quality output possible?
If you want to really cut down latency and need wireless with hardware like this, you could use a second ESP32 and send your own bitstream between them.
Practical bandwidth limits are in the ~72kb/s range with Bluetooth and a custom wire protocol, and Opus voice-mode encoding can't run in realtime beyond complexity 3; music encoding can't run at all. Maybe there's a more compute-friendly audio codec I'm not aware of, but as far as I know these chips just aren't quite powerful enough for high-quality music encoding, unfortunately. I'm hoping the S31 might be a bit better fit here (decent CPU boost + better SIMD).
Latency is still a bit rough with BT overhead. There might be some new options with LE audio on the S31 but I haven't found a way to get below ~80ms with the existing ESP32-S3 stack.
tl;dr, high quality voice is doable today with okay latency, music probably less so, maybe the S31 will be better
ESP-NOW is another option to look at, which of course won't work to transmit to a phone directly but can do a point-to-point or multicast transmission between ESP32 devices. I've used it in some projects but not for audio, I couldn't tell you how much of a buffer would be needed to make that work smoothly.
Another option for OP, if the audio is being synthesized then the parameters could be transmitted rather than the audio samples themselves and do synthesizing on the receiving device.
Code is here:
What exactly did you try?
Sorry, I don't know. I'm just responding to echo and expand on another reply that Bluetooth for anything related to serious music, from audio playback to MIDI input is a dumpster fire on Windows.
Several years ago I tried to set up a high-end Windows laptop for hobby DAW composition on the go. The real-world BT audio latency just from laptop to headphones/earbuds was unworkable and, separately, the input latency from BT midi controllers was unworkable. Stacked together the total lag was laughable.
At the time, the issues were widely known and much lamented. Some tech blogs (including one at MSFT) indicated there were issues at every level of the stack (drivers, firmware, silicon) and work was proceeding to address the end to end shit show. The only workable Windows solutions referenced online involved using specific non-Bluetooth wireless devices. Needing to have a dedicated USB dongle hanging off the laptop combined with having a choice of either one specific device or a receiver dongle to support all devices, is less appealing than just having a wire.
Since then I've looked again every year or so but have seen no reports yet of meaningful progress and there's even less discussion of work in progress. Very disappointing. And the situation on the BT audio quality side doesn't seem much better. If you don't want degraded audio quality it's either choosing very specific devices which support a proprietary BT codec or switching to non-BT wireless dongle hardware. At least there is talk of improvement on audio quality but no clear indication better baseline minimum audio quality will ever be mandated in the BT audio standard.
If anyone has info the baseline latency or quality (input or output) of standard BT devices in Windows configs will improve, I'd be delighted to hear it.
It's been a few years since the last time I actually tried it myself, instead of just checking user reports. I do remember I followed the DAW company's FAQ, set a mode in the DAW, and switched something in Windows settings related to BT. The wired latency (MIDI in and audio out) was excellent but switching either to BT tanked it.
It's frustrating that it appears to not have improved at all in a decade. I get the whole "good, fast, cheap" triangle and that most of the BT ecosystem only cares about "cheap" while being just good enough 128Kbps MP3s don't sound too much worse on $50 cuff link-sized earbuds. But I can't help naively thinking that on decadal timescales, the rising tide should lift even the "cheapest" corner of the triangle enough to yield slightly better minimum baseline quality - especially when it's been stuck forever at barely usable. Even more surprising is that BT gaming controllers still have such high latency, most BT controllers also come with a proprietary wireless dongle. Talk about pointless COGS and landfill.
I guess maybe the reason is those who really care can go wired, use non-BT wireless dongles or lock themselves to a proprietary vendor who controls both ends of the stack. But it kind of nerfs the point of having a short range wireless "standard" if doesn't cut COGS, landfill waste and never improves more 'serious' use cases even a little.