My low-cost plastic Casio watch based on a very old design is waterproof and battery can be swapped out by undoing 4 philips screws, no glue. Its buttons can also be operated under water while staying waterproof.
What is this whicraft?
What is this whicraft?
Do you also consider yourself incapable of jump starting a car because you might have to look up instructions first?
I know plenty of people that would never even consider jump starting thei car. However are also quite happy with poppping open a battery cover and doing a simple swap like any other battery powered device.
There's also a difference between not wanting to do something, and not being capable of it.
Many milions of people are scared by things such as red and black wires and wont touch them with a barge pole.
It's not just a matter of buying a battery and using some tools the average person has on hand. A whole kit of specialty tools and parts needs to be ordered to facilitate the repair. Apple's own repair kit is the most extreme form of this, where they ship 70lbs of tools, which would be comical if it wasn't so sad.
But on those watches with 4 screws on the case, the gasket seemed fine to me to keep reusing.
"• To maintain water resistance, have the gaskets of your watch replaced periodically (about once every two or three years)."
> Splash, water, and dust resistance are not permanent conditions and resistance might decrease as a result of normal wear. Liquid damage is not covered under warranty, but you might have rights under consumer law.[0]
If a gasket has a predictable life, there could be a warning after that period that the water resistance may be compromised and to replace the gasket if this is a concern for how the user use's the phone. With glue, it seems less certain and Apple goes so far as to say even dropping your phone can compromise the seal enough to risk liquid damage.
Meanwhile, a G-Shock was designed to have a battery life of 10 years, have a water resistance of 10 bar, and survive a fall of 10 meters. Dropping the watch doesn't nullify the water resistance claims, the goal was to be able to do all of those things at once.
These things _do_not_break_. Once I rashly dropped mine on a concrete floor to show off to a friend. I regretted it immediately, thinking oh no, I didn't have to take it that far... it turned out it was completely fine. I washed it with soap when I got mud over it. It also weighed a ton in my pocket.
https://www.homedepot.com/p/Lukyamzn-P2-P5-P6-Pentalobe-Scre...
At first it looks like a normal torx head, but then you realize it has 5 lobes instead of 6. Apple used these on early iPhone models when you actually could open them with this proprietary screwdriver.
Thus, companies put in a big effort to seal their phones against dust and water, which ought to have dramatically reduced these service issues and led to a better customer experience overall!
If I not being precise, keeping your phone in your jeans deep tight pocket when you are sweating or raining will cause you problems. It might seem too many coincidences for you, but it is common enough that some of us avoid keeping the phone in the pocket.
Most of these metrics are entirely orthogonal to what any real person wants from a phone, but that's an irrelevant detail to marketing types
That.
It’s also nice to be able to wash them under the tap
In other words, I absolutely see the need for waterproof phones, even for ordinary people doing ordinary things, and am never going to buy one that isn't.
I don't want to take extra care and caution just to have a life and a fone. Theoretically this thing makes my life easier and I want it to act like it damnit.
Believe it or not, yes!
Of course I don't have to actually _use_ the phone while swimming, so it goes into a waterproof pouch - but having a 2nd layer of defense is nice.
https://www.casio-intl.com/asia/en/wat/water_resistance/
> Even if a watch is water-resistant, do not operate its buttons or crown while it is submersed in water or wet.