First report for Donut lab battery is out. Here is the TLDR
Specs
26 Ah nominal capacity at 1C discharge rate
94 Wh nominal energy with 3.6V nominal voltage
Operates within 2.7V – 4.15V recommended range (max charging to 4.3V)
5C charging (130A): 0-80% in ~9.5 minutes, 0-100% in ~13.5 minutes
11C charging (286A): 0-80% in ~4.9 minutes, 0-100% in ~7.3 minutes
Successfully delivered 98.4-99.6% of charged capacity even after extreme 11C charging
Tested with both one-sided and two-sided heat sinks to simulate real-world conditions
With dual heat sinks: Peak temps of 47°C (5C) and 63°C (11C) — well within safe limits
With single heat sink: Reached 61.5°C (5C) and up to 89°C (11C) — still functional but approaching thermal limit
Energy density: No weight and volume was mentioned
Cycle life: VTT ran only 7 test cycles total.
Cost Claims: Nothing about cost is mentioned
Material Claims: No chemical analysis or materials analysis.
Extreme Temperature Performance: No cold weather testing. No high-temperature testing.
No abuse testing: No nail penetration, no overcharge, no short-circuit, no crush tests.