NTP at NIST Boulder Has Lost Power | Hacker News Reader

NTP at NIST Boulder Has Lost Power

lists.nanog.org

488 pointslpage210 comments

Wind gusts were reaching 125 MPH in Boulder county, if anyone’s curious. A lot of power was shut off preemptively to prevent downed power lines from starting wildfires. Energy providers gave warning to locals in advance. Shame that NIST’s backup generator failed, though.

Somewhat interesting that they themselves don't have access to the site. You'd think there would have been some disaster plans put in place?

Step One of most disaster plans is not to create a second emergency.

But can't NTP server downtime cause a disaster?

One (amongst many) NTP server going down creates less issues than an NTP server spreading wrong time.

General rule of thumb: a misbehaving/slow server in any well-architected distributed system is vastly worse than a dead server.

i.e. a gaslighting husband is vastly worse than a dead husband.

technically if you have 3 or more sources that would be caught; NTP protocol was designed for that eventuality

Sure, but not needing a failure to cascade to yet another failsafe is still a good idea. After all, all software has bugs, and all networks have configuration errors.

> technically if you have 3 or more sources that would be caught; NTP protocol was designed for that eventuality

Either go with one clock in your NTPd/Chrony configuration, or ≥4.

Yes, if you have 3 they can triangulate, but if one goes offline now you have 2 with no tie-breaker. If you have (at least) 4 servers, then one can go away and triangulation / sanity-checking can still occur with the 3 remaining.

Your probably meant trilaterate.

If your application is so critical that NTP timing loss causes disaster and your holdover fails in less than a day and you aren't generating your own via gps, you are incompetent, full stop

And if things are that critical, you might have other references besides just GPS...

E.g.,

* https://www.meinbergglobal.com/english/products/

Or even just a microsecond emergency.

Bravo

Maybe this is the disaster plan: There's not a smouldering hole where NIST's Boulder facility used to be, and it will be operational again soon enough.

There's no present need for important hard-to-replace sciencey-dudes to go into the shop (which is probably both cold, and dark, and may have other problems that make it unsafe: it's deliberately closed) to futz around with the the time machines.

We still have other NTP clocks. Spooky-accurate clocks that the public can get to, even, like just up the road at NIST in Fort Collins (where WWVB lives, and which is currently up), and in Maryland.

This is just one set.

And beyond that, we've also got clocks in GPS satellites orbiting, and a whole world of low-stratum NTP servers that distribute that time on the network. (I have one such GPS-backed NTP server on the shelf behind me; there's not much to it.)

And the orbital GPS clocks are controlled by the US Navy, not NIST.

So there's redundancy in distribution, and also control, and some of the clocks aren't even on the Earth.

Some people may be bit by this if their systems rely on only one NTP server, or only on the subset of them that are down.

And if we're following section 3.2 of RFC 8633 and using multiple diverse NTP sources for our important stuff, then this event (while certainly interesting!) is not presently an issue at all.

There are many backup clocks/clusters that NIST uses as redundancies all around Boulder too, no need to even go up to Fort Collins. As in, NIST has fiber to a few at CU and a few commercial companies, last I checked. They're used in cases just like this one.

Fun facts about The clock:

You can't put anything in the room or take anything out. That's how sensitive the clock is.

The room is just filled with asbestos.

The actual port for the actual clock, the little metal thingy that is going buzz, buzz, buzz with voltage every second on the dot? Yeah, that little port isn't actually hooked up to anything, as again, it's so sensitive (impedance matching). So they use the other ports on the card for actual data transfer to the rest of the world. They do the adjustments so it's all fine in the end. But you have to define something as the second, and that little unused port is it.

You can take a few pictures in the cramped little room, but you can't linger, as again, just your extra mass and gravity affects things fairly quickly.

If there are more questions about time and timekeeping in general, go ahead and ask, though I'll probably get back to them a bit later today.

Will the time it takes you to answer depend on the mass of the person asking?

>The actual port for the actual clock, the little metal thingy that is going buzz, buzz, buzz with voltage every second on the dot? Yeah, that little port isn't actually hooked up to anything, as again, it's so sensitive (impedance matching). So they use the other ports on the card for actual data transfer to the rest of the world.

Can you restate this part in full technical jargon along with more detail? I'm having a hard time following it

it sounds like there's some kind of coupling, inductive or optoelectronic

but yes, I also want the juicy details!

so this is the clock

https://en.wikipedia.org/wiki/NIST-F1

or this

https://en.wikipedia.org/wiki/NIST-F2

or there's already F4 too, but it doesn't have a Wikipedia article yet

https://www.nist.gov/news-events/news/2025/04/new-atomic-fou...

but maybe they are talking about the new non-microwave clocks that use Ytterbium-based optical combs ...

or about the Aluminum ion clock

https://www.nist.gov/news-events/news/2025/07/nist-ion-clock...

mind blown

These claims are bullshit. You can get technical details about the clock first-hand at this link:

https://www.nist.gov/pml/time-and-frequency-division/time-re...

and you can see a photo of the actual installation here:

https://www.denver7.com/news/front-range/boulder/new-atomic-...

As you can see, the room is clearly not filled with asbestos. Furthermore, the claim is absurd on its face. Asbestos was banned in the U.S. in March 2024 [1] and the clock was commissioned in May 2025.

The rest of the claims are equally questionable. For example:

> The actual port for the actual clock ... isn't actually hooked up to anything ... they use the other ports on the card for actual data transfer

It's hard to make heads or tails of this, but if you read the technical description of the clock you will see that by the time you get to anything in the system that could reasonably be described as a "card" with "ports" you are so far from the business end of the clock that nothing you do could plausibly have an impact on its operation.

> You can't put anything in the room or take anything out. That's how sensitive the clock is.

This claim is also easily debunked using the formula for gravitational time dilation [2]. The accuracy of the clock is ~10^-16. Calculating the mass of an object 1m away from the clock that would produce this effect is left as an exercise, but it's a lot more than the mass of a human. To get a rough idea, the relativistic time dilation on the surface of the earth is <100 μs/day [3]. That is huge by atomic clock standards, but that is the result of 10^24kg of mass. A human is 20 orders of magnitude lighter.

---

[1] https://www.mesotheliomahope.com/legal/legislation/asbestos-...

[2] https://en.wikipedia.org/wiki/Gravitational_time_dilation

[3] https://tf.nist.gov/general/pdf/3278.pdf

Agreed the stated claims don't seem to make much sense. Using a point mass 1 meter away and (G*M)/(r*c^2) I'm getting that you'd have to stand next to the clock for ~61 years to cause a time dilation due to gravity exceeding 10^-16 seconds.

Actually, it's even worse than that: the design of the clock makes it so that the cesium atoms doing the actual time keeping are in free-fall while they are being observed. So it is physically impossible for any gravitational influence to change the accuracy of the clock.

I'm the Manager of the Computing group at JILA at CU, where utcnist*.colorado.edu used to be housed. Those machines were, for years, consistently the highest bandwidth usage computers on campus.

Unfortunately, the HP cesium clock that backed the utcnist systems failed a few weeks ago, so they're offline. I believe the plan is to decommission those servers anyway - NIST doesn't even list them on the NTP status page anymore, and Judah Levine has retired (though he still comes in frequently). Judah told me in the past that the typical plan in this situation is that you reference a spare HP clock with the clock at NIST, then drive it over to JILA backed by some sort of battery and put it in the rack, then send in the broken one for refurb (~$20k-$40k; new box is closer to $75k). The same is true for the WWVB station, should its clocks fail.

There is fiber that connects NIST to CU (it's part of the BRAN - Boulder Research and Administration Network). Typically that's used when comparing some of the new clocks at JILA (like Jun Ye's strontium clock) to NIST's reference. Fun fact: Some years back the group was noticing loss due to the fiber couplers in various closets between JILA & NIST... so they went to the closets and directly spliced the fibers to each other. It's now one single strand of fiber between JILA & NIST Boulder.

That fiber wasn't connected to the clock that backed utcnist though. utcnist's clock was a commercial cesium clock box from HP that was also fed by GPS. This setup was not particularly sensitive to people being in the room or anything.

Another fun fact: utcnist3 was an FPGA developed in-house to respond to NTP traffic. Super cool project, though I didn't have anything to do with it, haha.

This is super cool (and the kind of comment that I love reading on HN!), thanks for sharing.

I love these comments on HN.

Now if the (otherwise very kind) guy in charge of the Bureau international des poids et mesures at Sèvres who did not let me have a look at the refrerence for the kilogram and meter could change his mind, I would appreciate. For a physicist this is kinda like a cathedral.

If you ever are in Paris, I can't recommend the Musee des Arts et Metiers enough. I believe they have the several reference platinum kilograms that are now out of spec. [1] they also have the original actual Foucault pendulum that was used to demonstrate Earth's rotation. (and a replica doing a live demo, of course)

They have so many incredible artifacts (for weights and measures but also so much more: engineering, physics, civil engineering, machining,...)

[1]: https://collections.arts-et-metiers.net?id=13404-0001-

Ahhh, thank you for the tip. I live in Versailles and usually go to museums for art, but this would be wonderful as well.

The Musée de Sèvres (or Bureau des Mesures as it is called now) has the original kilogramme and meter iridium reference, hidden in the basement ;( So if the director has a change of heart, I am all in!

I don't know if you will be reading this, but I am just back from that museum. Thank you very much for the information.

I spent 4 hours to there and was surprised to see so many tourists, this is not a place I expected people visiting Paris to go to. There were no crowds though.

The top part is really great, you get to see how much people did with so little. So is the chemistry part.

I found the steel replica of the kilogramme and the meter, and of course the Foucault pendulum (in the neighboring refurbished church).

This is truly an interesting museum, on part with the museum of discoveries (musée de la découverte) which is unfortunately close now for a few years for renovations (or at lest was recently planned to be closed). Much better than La Vilette.

So thank you again!

> And the orbital GPS clocks are controlled by the US Navy, not NIST.

I thought it was US Space Force / Air Force. Was the Navy previously or currently involved?

Direct control is by Space Force. However the US Navy Naval Observatory is responsible for (amongst other things) providing timekeeping for the DoD.

In this context, they feed timing updates to the GPS operators https://www.cnmoc.usff.navy.mil/Our-Commands/United-States-N...

The disater plan is to have a few dozens stratum 1 servers spread around the world, each connected to a distinct primary atomic clock, so that a catastrophic disaster needs to take down the global internet itself for all servers to become unreachable.

The failure of a single such server is far from a disaster.

For those of us near Boulder, it's urgent.

But the stratum 1 time servers can shrug and route around the damage.

And the disaster plan for the disaster plan is to realize that it isn't that important at the human-level to have a clock meticulously set to correspond to other meticulously-set clocks, and that every attempt to force rigid timekeeping on humans is to try to make humans work more like machines rather than to make machines work more like humans.

I really, really can't get behind this sentiment. Having a reliable, accurate time keeping mechanism doesn't seem like an outlandish issue to want to maintain. Timekeeping has been an important mechanism for humans for as long as recorded history. I don't understand the wisdom of shooting down establishing systems to make that better, even if the direct applicability to a single human's life is remote. We are all part of a huge, interconnected system whether we like it or not, and accurate, synchronized timekeeping across the world does not sound nefarious to me.

> Timekeeping has been an important mechanism for humans for as long as recorded history.

And for 99% of that history, Noon was when the sun was half-way through its daily arc at whatever point on Earth one happened to inhabit. The ownership class are the ones who invented things like time zones to stop their trains from running in to each other, and NTP is just the latest and most-pervasive-and-invasive evolution of that same inhuman mindset.

From a privacy point of view, constant NTP requests are right up there alongside weather apps and software telemetry for “things which announce everyone's computers to the global spy apparatus”, feeding the Palantirs of the world to be able to directly locate you as an individual if need be.

Tell me how you feel about DST.

> The ownership class are the ones who invented things like time zones to stop their trains from running in to each other

In a world where this didn't happen, your comment would most likely read:

> The ownership class are the ones who had such indifference toward the lives of the lower class passengers that they didn't bother stopping their trains from running into each other.

oh....no, not really, no, the world needs GPS, so, yeah. this is not like scrooge mcduck telling you to be at work on time. scrooge still has a windup watch

Far more things rely on reliable and accurate time-keeping than just being on time to work. Timekeeping is vitally important (even if it's not readily visible) to lots of critical infrastructure worldwide.

Actually, it's really important to me to have a network of atomic clocks available to verify the times I clock in and out, I want to make sure I get paid for an accurate duration of time down to the nanosecond

This is like the kid in school who doesn't think they should have to learn algebra since they think they will never use it.

And as things fell apart / Nobody paid much attention

"Wearing a watch is like being handcuffed to time."

-My Friend Andy

If access to the site is unsafe and thus the site is closed; not having access seems reasonable.

Time services are available from other locations. That's the disaster plan. I'm sure there will be some negative consequences from this downtime, especially if all the Boulder reference time sources lose power, but disaster plans mitigate negative consequences, they can't eliminate them.

Utility power fails, automatic transfer switches fail, backup generators fail, building fires happen, etc. Sometimes the system has to be shut down.

At this time the local power utility shows: Total of 140 outages affecting 24,981 customers. [1]

Remember - the Marshall fire started on December 30, 2021 under similar high wind conditions. [2] 1,000 structures destroyed, two deaths.

[1] https://co.my.xcelenergy.com/s/outage-safety/outage-map

[2] https://en.wikipedia.org/wiki/Marshall_Fire

Notably, we had the marshal fire here 4 years ago and recently Xcel settled for $680M for their role in the fire. So they're probably pretty keen not to be on the hook again

For more background on the Marshal Fire of Dec. 2021: https://en.wikipedia.org/wiki/Marshall_Fire

tl;dr - the fire destroyed over 1,000 homes, two deaths. The local electrical utility, Xcel, was found as a contributing cause from sparking power lines during a strong wind storm. As a result, electrical utilities now cut power to affected areas during strong winds.

I guess that explains why they had no qualms shutting down half of Boulder's power with a vague time horizon. After losing everything in my fridge, though, they finally turned it back on today.

Indeed. Losing the contents of (lots of) fridges is cheaper, as a whole, than incidentally burning the countryside. We all ultimately pay for the result no matter what, so that seems like a reasonably-sensible bet.

On the fridge itself: You may find that the contents are insured against power outages.

As an anecdote, my (completely not-special) homeowner's insurance didn't protest at all about writing a check for the contents of my fridge and freezer when I asked about that, after my house was without power for a couple of weeks following the 2008 derecho. This rather small claim didn't affect my rate in any way that I could perceive.

And to digress a bit: I have a chest freezer. These days I fill up the extra space in the freezer with water -- with "single-use" plastic containers (water bottles, milk jugs) that would normally be landfilled or recycled.

This does a couple of things: On normal days, it increases thermal mass of the freezer, and that improves the cycle times for the compressor in ways that tend to make it happier over time. In the abnormal event of a long power outage, it also provides a source of ice that is chilled to 0F/18C that I can relocate into the fridge (or into a cooler, perhaps for transport), to keep cold stuff cold.

It's not a long-term solution, but it'll help ensure that I've got a fairly normal supply of fresh food to eat for a couple of days if the power dips. And it's pretty low-effort on my part. I've probably spent nearly as much effort writing about this system here just now as I have on implementing it.

It's probably not worth it to go through your insurance for the loss of food and perishables in the fridge/freezer. It counts as a claim on your home insurance and can result in increased rates or even your insurer dropping coverage at the next renewal.

Eh. It worked for me after that wind storm.

As previously-stated: There was no rate increase that I could discern.

I did neglect to mention that there was also no issue with renewal, but perhaps I should be more careful to always use absolute rote specificity and leave nothing to implication.

They also sent over some folks with a tall ladder to have a look at the roof of this property that they insured, which was good since we had no means to visually inspect it from the ground. (The roof was fine.)

Anecdotally, that phone call to the insurance company had no downside at all.

It provided a roof inspection that I did not have ready means to perform on my own, and a relatively small amount of money (a couple of hundred bucks) that became very useful not just because of lost food, but also due to all of the other storm-related issues that we were not insured against.

they gave days of advanced warning they would do this. there was time to prepare.

Yup, here in Jefferson County - roughly 30 minutes south of Boulder County, we were getting wind gusts around 80mph.

> Wind gusts were reaching 125 MPH in Boulder county, if anyone’s curious.

That's some strong winds! What's causing such strong sustained/gusty winds that long? I'm hearing about this weather phenomenon for the first time.

Of the various internet .+P, NTP is one I never learned about as a student, so now I'm looking at its web page [1] by its creator David L. Mills (1938-2024). I've found one video of him giving a retrospective of his extensive internet work; he talks about NTP at 34:51 [2] and later at 56:26 [3].

[1] https://www.eecis.udel.edu/~mills/ntp.html

[2] https://youtu.be/08jBmCvxkv4?si=WXJCV_v0qlZQK3m4&t=2092

[3] https://youtu.be/08jBmCvxkv4?si=K80ThtYZWcOAxUga&t=3386

HN discussion shortly after Dave Mills died, early in 2024: https://news.ycombinator.com/item?id=39051246

In [3] he mentions that one can use NTP to observe frequency deviations and use it as an early warning system for fire and AC failure. That really intrigues me. Can you actually? Has this ever been implemented?

Oscillators of all kinds are temperature dependent.

That's why the most stable ones are insulated and ovenized[1].

So an AC failure which would lead to higher room temperatures would lead to stronger or more frequent correction by the NTP client, as the local oscillator would drift more.

Not sure about the fire case though. I mean the same applies there but I'm not imaginative enough to think of a realistic scenario where NTP would be useful for averting a fire.

[1]: https://blog.bliley.com/anatomy-of-an-ocxo-oven-controlled-c...

I knew of some experiments in this space back in the late 1980s or early 1990s - but it was specifically with DECstation hardware that had terrible clocks (not used for alerting, just "this graphs nicely against temperature".) https://groups.csail.mit.edu/ana/Publications/PubPDFs/Greg.T... (PDF) 4.2.1 does talk about explaining local clock frequency changes with office temperature changes (because they overwhelm a clock-aging model) but it doesn't have graphs so perhaps they weren't clear enough to include (or just not relevant enough to Time Surveying.)

What do you mean by +P?

Looks like .+P is just a regex way of saying any set of characters / protocol ending in P.

Nothing, as they said .+P (note the dot)

Presumably, .+P is regex referring too all the acronyms ending with P, that is Protocol. SMTP, HTTP, FTP, IMAP, XMPP…

Amazingly, The New Yorker wrote an article about it: https://www.newyorker.com/tech/annals-of-technology/the-thor...

> Facility operators anticipated needing to shutdown the heat-exchange infrastructure providing air cooling to many parts of the building, including some internal networking closets. As a result, many of these too were preemptively shutdown with the result that our group lacks much of the monitoring and control capabilities we ordinarily have

Having a parallel low bandwidth, low power, low waste heat network infrastructure for this suddenly seems useful.

Like reticulum?

https://github.com/markqvist/Reticulum/

NIST campus status: Due to elevated fire risk and a power outage for the Boulder area, the DOC Boulder Labs campus is CLOSED on December 19 for onsite business and no public access is permitted; previously approved accesses are revoked.[1]

WWV still seems to be up, including voice phone access.

NIST Boulder has a recorded phone number for site status, and it says that as of December 20, the site is closed with no access.

NIST's main web site says they put status info on various social media accounts, but there's no announcement about this.

[1] https://www.nist.gov/campus-status

Note that WWV is a good 60 miles NNE of Boulder on the outskirts of Fort Collins.

Can anybody expand on the implications of this?

Being unfamiliar with it, it's hard to tell if this is a minor blip that happens all the time, or if it's potentially a major issue that could cause cascading errors equal to the hype of Y2K.

Time engineers are very paranoid. I expect large problems can't occur due to a single provider misbehaving.

Time travel is extremely dangerous right now. I highly recommend deferring time travel plans except for extreme temporal emergencies.

Define “extreme”?

Same for database transaction roll back and roll forward actions.

And most enterprises, including banks, use databases.

So by bad luck, you may get a couple of transactions reversed in order of time, such as a $20 debit incorrectly happening before a $10 credit, when your bank balance was only $10 prior to both those transactions. So your balance temporarily goes negative.

Now imagine if all those amounts were ten thousand times higher ...

To clear, most banks "sort" transactions from to high to low to create more NSF fees on purpose.

That purpose equates to over $12 billion in fees for 2024

https://finhealthnetwork.org/research/overdraft-nsf-fees-big...

Awful stuff.

I was just starting off in life (kid, girl, job, apartment, bank, debit card, bills) when I made a 63-cent error with my bank account. Which is to say: If all of the negative debits and all of the positive credits were summed, then the account would have been in the negative by 63 cents.

I screwed up. And in a fair and just world, I'd owe the bank some extra tithing for quite clearly having spent some money that I very definitely did not have. Maybe $20 for the error and $10 per day spent in the red, plus the 63 cents, or something along those lines.

But it wasn't that way. Because the transactions were processed in batches that were re-ordered to be highest-first, I discovered that I owed the bank a little more than $430.

At the time (around 25 years ago, now) that was an absolute mountain of money to me.

The banker at the branch I went into was unapologetic and crass about the fees.

Looking over my transactions, they said "You know how to do math, right? You should have known that the account was overdrawn, but you were just out spending money willy-nilly all over town anyway."

I replied with something like "I made a single error of 63 cents. The rest of what you said is an invention."

This went back and forth for a bit before I successfully managed to leave the building without any handcuffs, fire trucks, or ambulances becoming involved -- and I still owed them more than $430.

The lesson I learned was very simple: Seriously, fuck those guys.

($12 billion in 2024, huh? That's all? Maybe the no-fee fintechs are winning.)

Would traveling to the past in order to put in place a preemptive fix for this outage be wise or dangerous?

Asking for a friend.

Tell your friend that this course of action failed, as us in the present are still experiencing issues.

Well, that's _this_ timeline. Other timelines never had an outage.

Not with Terminator rules…

Safety not guaranteed.

I couldn't comment on the causal hazards but since time is currently having an outage they've got an improved shot at getting away with it. I say go for it.

Very unproblematic. Your travelling back will land you in a freshly branched universe with no way back to the one you came from, so no worries there.

Uhh, here's the problem, I'm sort of stuck travelling into the future at a more or less constant rate. I don't know how to stop doing that...

Just go to your local shop and buy some time brakes. That's the safest course of action until this is repaired.

ugh. I have to replace my time rotors again - I thought regen was supposed to help with the wear while it improved range?

Unless you can stop, I'm afraid this will cause almost certain death.

I regret to inform you that as a consequence of that sustained time travel, your mind and body will be slowly deteriorating and you’ll sooner or later end up dead.

>"you’ll sooner or later end up dead."

What a defeatist attitude, I plan to live forever or die trying! /s

Have you tried asymptotically approaching the speed of light?

I’m quite certain you can approach it in any convenient manner

Unless you want to punch a guy in the face offscreen. Then go for it.

If your computer was using it as your time server and you didn't have alternatives configured your clock my have drifted a few seconds.

I never checked it, but how much a typical's pc/server's clock does actually drift over a week or a month? I always thought it's well under a second.

Clocks do drift. Seconds a week is definitely possible. I think there are varying quality of internal clocks in electronic devices, and the cheaper the quality the more drift there is. I think small cheap microcontrollers can drift seconds per day.

cheap microcontrollers use RC oscillators. If they only drift a few seconds a day, that would be an achievement by itself.

RC oscillator is poor enough that early days USB communication would fail if running on RC clock.

I've seen some new ThinkPads lose a minute a month and others (the old ThinkPads) keep within a second of NTP over an entire year. It depends.

Several seconds per week is normal. Oscillator accuracy is roughly on the order of 10 PPM, which would correspond to 6 seconds per week.

I have an extremely cheap and extremely low power automatic cat feed - it’s been on 2 D batteries for 18 months. I just reset it after it had drifted 19 minutes, so about 1 minute a month, or 15 seconds a week!

Google has their own fleet of atomic clocks and time servers. So does AWS. So does Microsoft. So does Ubuntu. They're not going to drift enough for months to cause trouble. So the Internet can ride through this, mostly.

The main problem will be services that assume at least one of the NIST time servers is up. Somewhere, there's going to be something that won't work right when all the NIST NTP servers are down. But what?

I know this is HN, but the internet is pretty low on the list of things NIST time standards are important for.

But pretty high on the list that NIST NTP is important for (since it leaves the building through the internet).

If NIST NTP goes down, the internet doesn’t go down. But atomic clocks drifting does upset many scientific experiments, which would effectively go down for the duration of the outage.

This is the reason GP listed out all the alternative robust NTP services that are GPS disciplined, freely available, and used as redundant sources by any responsible timekeeper.

What atomic clocks are disciplined by NTP anyway? Local GPS disciplining is the standard. If you're using NTP you don't need precision or accuracy in your timekeeping.

Also, I forgot to mention that NIST offers (and many institutions use) a service that provides a local rubidium reference that is GPS disciplined and they give you monthly reports that tell you the offset of the timestamps that were reported so they can be corrected. These services did not suffer interruptions.

could you list 3 things that you think are more important than the internet? (I know the internet is going to be fine; I just want to understand what you think ranks higher globally...)

Mostly scientific stuff like astronomical observations — e.g. did this event observed at one telescope coincide with neutrinos detected at this other observatory.

Note I didn’t say they are more important than the Internet. That’s a value judgement in any case. I said that NIST level 0 NTp servers are more important to these use cases than they are to the Internet.

All these use at least GPS for timing

No, they don’t. GPS is orders of magnitude less reliable than the most up to date metric time synchronization over fixed topology fiber links.

I wonder why we bothered building GPS signal waveguides into the bottom of a mine then. Clearly we should have consulted the experts of hacker news first.

Losing NTP for a day is going to affect fuck-all.

I'm not even sure why you're trying to argue this. It's well established that Time over Fiber is 1-2 orders of magnitude more accurate and precise than GNSS time. Fiber time is also immune to many of the numerous sources of interference GNSS systems encounter, which anyone who's done serious timekeeping will be well acquainted with.

Trying to argue that neutrino experiments use GPS time, because they do?

I’m sure synchronising all the worlds detectors over direct fiber links would… work, but, they aren’t.

Unless you are trying to argue internal synchronisation in which case, obviously, but that has absolutely zero to do with losing NTP for a day, the topic of conversation.

The deployments are still obviously limited, but this is something you can straight up buy if you're near a NIST facility [0]. I believe the longest existing link is NJ<->Chicago, which is used for HFT between the exchanges.

[0] https://shop.nist.gov/ccrz__ProductDetails?sku=78200C

I doubt that very much. GPS time integrity is a big deal in many very important applications -- not the least of which is GPS itself -- and is treated as such.

Yes, an individual fiber distribution system can be much more accurate than GNSS time, but availability is what actually matters. Five nines at USNO would get somebody fired.

The ability for humankind to communicate across the entire globe at nearly 1/4 of the speed of light has drastically accelerated our technological advancement. There is no doubt that the internet is a HUGE addition to society.

It's not super important when compared to basic needs like plumbing, food, electricity, medical assistance and other silly things we take for granted but are heavily dependent on. We all saw what happened to hospitals during the early stages of the COVID pandemic; we had plenty of internet and electricity but were struggling on the medical part. That was quite bad... I'm not sure if it's any worse if an entire country/continent lost access to the Internet. Quite a lot of our core infrastructure components in society rely on this. And a fair bit of it relies on a common understanding of what time "now" is.

I think it wont be affected by this but on the top of my head:

- GPS

- industrial complex that synchronize operations (we could include trains)

- telecoms in general (so a level higher than the internet)

GPS uses the atomic clocks on the satellites though.

(Random search result from space force https://www.ssc.spaceforce.mil/Newsroom/Article/4039094/50-y... claims that cell phone tower-to-tower handoff uses GPS-mediated timing (only microsecond level though.)

The satellite clocks are designed to run autonomously for a few days without noticeable degradation, and up to a few weeks with defined levels of inaccuracy, but they are normally adjusted once a day by the ground stations based on the timescale maintained by the USNO. That, in turn, uses an ensemble of H-masers.

In a past job I set up at least 5 domain dns servers pointing at nist ntp…

Atomic clock non-expert here, what does having a fleet of atomic clocks entail and why would the hyperscalers bother?

Having clocks synchronized between your servers is extremely useful. For example, having a guarantee that the timestamp of arrival of a packet (measured by the clock on the destination) is ALWAYS bigger than the timestamp recorded by the sender is a huge win, especially for things like database scaling.

For this though you need to go beyond NTP into PTP which is still usually based on GPS time and atomic clocks

Actually interesting to think about what UTC actually means and there is seems to be no absolute source of truth [0]. I guess the worry is not that much about the NTP servers (for which people anyways should configure fail overs) but the clocks themselves.

[0] https://www.septentrio.com/en/learn-more/insights/how-gps-br...

Could you define an absolute source of truth based on extrinsic features. Something like taking an intrinsic time from atomic sources, pegged to an astronomic or celestial event; then a predicted astronomic event that would allow us to reconcile time in the future.

It might be difficult to generate enough resolution in measurable events that we can predict accurately enough? Like, I'm guessing the start of a transit or alignment event? Maybe something like predicting the time at which a laser pulse will be returnable from a lunar reflector -- if we can do the prediction accurately enough then we can re-establish time back to the current fixed scale.

I think I'm addressing an event that won't ever happen (all precise and accurate time sources are lost/perturbed), and if it does it won't be important to re-sync in this way. But you know...

Spanner depends on having a time source with bounded error to maintain consistency. Google accomplishes this by having GPS and atomic clocks in several datacenters.

https://static.googleusercontent.com/media/research.google.c...

And more importantly, the tighter the time bound, the higher the performance, so more accurate clocks easily pay for themselves in other saved infrastructure costs to service the same number of users.

There's a lot of focus in this thread on the atomic clocks but in most datacenters, they're not actually that important and I'm dubious that the hyperscalers actually maintain a "fleet" of them, in the sense that there are hundreds or thousands of these clocks in their datacenters.

The ultimate goal is usually to have a bunch of computers all around the world run synchronised to one clock, within some very small error bound. This enables fancy things like [0].

Usually, this is achieved by having some master clock(s) for each datacenter, which distribute time to other servers using something like NTP or PTP. These clocks, like any other clock, need two things to be useful: an oscillator, to provide ticks, and something by which to set the clock.

In standard off-the-shelf hardware, like the Intel E810 network card, you'll have an OXCO, like [1], with a GPS module. The OXCO provides the ticks, the GPS module provides a timestamp to set the clock with and a pulse for when to set it.

As long as you have GPS reception, even this hardware is extremely accurate. The GPS module provides a new timestamp, potentially accurate to within single-digit nanoseconds ([2] datasheet), every second. These timestamps can be used to adjust the oscillator and/or how its ticks are interpreted, such that you maintain accuracy between the timestamps from GPS.

The problem comes when you lose GPS. Once this happens, you become dependent on the accuracy of the oscillator. An OXCO like [1] can hold to within 1µs accuracy over 4 hours without any corrections but if you need better than that (either more time below 1µs, or more accurate than 1µs over the same time), you need a better oscillator.

The best oscillators are atomic oscillators. [2] for example can maintain better than 200ns accuracy over 24h.

So for a datacenter application, I think the main reason for an atomic clock is simply for retaining extreme accuracy in the event of an outage. For quite reasonable accuracy, a more affordable OXCO works perfectly well.

[0]: https://docs.cloud.google.com/spanner/docs/true-time-externa...

[1]: https://www.microchip.com/en-us/product/OX-221

[2]: https://www.u-blox.com/en/product/zed-f9t-module

[3]: https://www.microchip.com/en-us/products/clock-and-timing/co...

I don't know about all hyperscalers, but I have knowledge of one of them that has a large enough fleet of atomic frequency standards to warrant dedicated engineering. Several dozen frequency standards at least, possibly low hundreds. Definitely not one per machine, but also not just one per datacenter.

As you say, the goal is to keep the system clocks on the server fleet tightly aligned, to enable things like TrueTime. But also to have sufficient redundancy and long enough holdover in the absence of GNSS (usually due to hardware or firmware failure on the GNSS receivers) that the likelihood of violating the SLA on global time uncertainty is vanishingly small.

The "global" part is what pushes towards having higher end frequency standards, they want to be able to freewheel for O(days) while maintaining low global uncertainty. Drifting a little from external timescales in that scenario is fine, as long as all their machines drift together as an ensemble.

The deployment I know of was originally rubidium frequency standards disciplined by GNSS, but later that got upgraded to cesium standards to increase accuracy and holdover performance. Likely using an "industrial grade" cesium standard that's fairly readily available, very good but not in the same league as the stuff NIST operates.

> There's a lot of focus in this thread on the atomic clocks but in most datacenters, they're not actually that important and I'm dubious that the hyperscalers actually maintain a "fleet" of them, in the sense that there are hundreds or thousands of these clocks in their datacenters.

I mean, fleets come in all sizes; but if you put one atomic reference in each AZ of each datacenter, there's a fleet. Maybe the references aren't great at distributing time, so you add a few NTP distributors per datacenter too and your fleet is a little bigger. Google's got 42 regions in GCP, so they've got a case for hundreds of machines for time (plus they've invested in spanner which has some pretty strict needs); other clouds are likely similar.

GPS satellites have their own atomic clocks. They're synchronized to clocks at the GPS control center at Schriever Space Force Base, Colorado, formerly Falcon AFB. They in turn synchronize to NIST in Boulder, Colorado. GPS has a lot of ground infrastructure checking on the satellites, and backup control centers. GPS should continue to work fine, even if there's some absolute error vs. NIST. Unless there have been layoffs.

Ubuntu using atomic clocks would surprise me. Sure they could, but it's not obvious to me why they would spend $$$$ on such. More plausible to me seems that they would be using GPSDO as reference clocks (in this context, about as good as your own atomic clock), iff they were running their own time servers. Google finds only that they are using servers from the NTP Pool Project, which will be using a variety of reference clocks.

If you have information on what they actually are using internally, please share.

I think people have a wrong idea of what a modern atomic clock looks like. These are readily available commercially, Microchip for example will happily sell you hydrogen, cesium or rubidium atomic clocks. Hydrogen masers are rather unwieldy, but you can get a rubidium clock in a 1U format and cesium ones are not much bigger. I think their cesium freq standards are formerly a HP business they acquired.

Example: https://www.microchip.com/en-us/products/clock-and-timing/co...

It is also important to realize that an atomic clock will only give you a steady pulse. It will count seconds for you, and do so very accurately, but that is not the same as knowing what time it is.

If you get a rubidium clock for your garage, you can sync it up with GPS to get an accurate-enough clock for your hobby NTP project, but large research institutions and their expensive contraptions are more elaborate to set up.

There are dedicated turnkey vendors these days, so there's no need to get elaborate. All you need is a U of rack or two and enough cash.

Example: https://www.accubeat.com/ntp-ptp-time-servers

Sure, but F2 is a bit more accurate: "As of February 2016 the IT-CsF2 cesium fountain clock started reporting a uB of 1.7 × 10−16 in the BIPM reports of evaluation of primary frequency standards." ( from https://web.archive.org/web/20220121090046/ftp://ftp2.bipm.o... )

woah hold on a sec. that's not how these clocks are actually used though.

It's a huge huge huge misconception that you can just plunk down an "atomic clock", discipline an NTP server with it and get perfect wallclock time out of it forever. That is just not how it works. Two hydrogen masers sitting next to each other will drift. Two globally distributed networks of hydrogen masers will drift. They cannot NOT drift. The universe just be that way.

UTC is by definition a consensus; there is no clock in the entire world that one could say is exactly tracking it.

Google probably has the gear and the global distribution that they could probably keep pretty close over 30-60 days, but they are assuredly not trying to keep their own independent time standard. Their goal is to keep events correlated on their own network, and for that they just need good internal distribution and consensus, and they are at the point where doing that internally makes sense. But this is the same problem on any size network.

Honestly for just NTP, I've never really seen evidence that anything better than a good GPS disciplined TCXO even matters. The reason they offer these oscillators in such devices is because they usually do additional duties like running PtP or distributing a local 10mhz reference where their specific performance characteristics are more useful. Rubidium, for instance, is very stable at short timescales but has awful long term stability.

> Google probably has the gear and the global distribution that they could probably keep pretty close over 30-60 days, but they are assuredly not trying to keep their own independent time standard.

Funny you should say that... https://developers.google.com/time/smear

atomic clock is not expensive. they have different grades. module level atomic clock cost only $3500.

the NIST hydrogen clock is very expensive and sophisticated.

Can't they point these dns records to working servers meanwhile to avoid degradation?

My understanding is that people who connect specifically to the NIST ensemble in Boulder (often via a direct fiber hookup rather than using the internet) are doing so because they are running a scientific experiment that relies on that specific clock. When your use case is sensitive enough, it's not directly interchangable with other clocks.

Everyone else is already connecting to load balanced services that rotate through many servers, or have set up their own load balancing / fallbacks. The mistakenly hardcoded configurations should probably be shaken loose anyways.

If you use a general purpose hostname like time.nist.gov: that should resolve to an operational server and it makes sense to adjust during an incident. If you use a specific server hostname like time-a-b.nist.gov: that should resolve to the specific server and you're expected to have multiple hosts specified; it doesn't make sense to adjust during an incident, IMHO. You wanted boulder, you're getting boulder, faults and all.

GPS?

NIST maintains several time standards. Gaithersburg MD is still up and I assume Hawaii is as well. Other than potential damage to equipment from loss of power (turbo molecular vacuum pumps and oil diffusion pumps might end up failing in interesting ways if not shut down properly) it will just take some time for the clocks to be recalibrated against the other NIST standards.

Gaithersburg went down on December 8th, is there confirmation that it's fully functional again?

https://tf.nist.gov/tf-cgi/servers.cgi

Says it's still mostly up.

>Can anybody expand on the implications of this?

The answer is no. Anyone claiming this will have an impact on infrastructure has no evidence backing it up. Table top exercises at best.

I’d say everybody moving off NIST boulder NTP.

Unix timestamp resets to zero.

I always wanted to see what the 70s were like, heres to hoping it happens.

No noteworthy impact at all. The NTP network has hundreds to thousands of redundant servers and hundreds of redundant reference clocks.

The network will route around the damage with no real effects. Maybe a few microseconds of jitter as you have to ask a more distant server for the time.

Songs with lyrics such as, "What time is it?" will have no clap back.

Perhaps, "We don't know." will become popular?

FYI, this was posted a month ago when discussing thermal effects of clock drift. I thought it was quite interesting view of what the WWVB location looks like:

https://jila.colorado.edu/news-events/articles/spare-time

Discussed here: https://news.ycombinator.com/item?id=46042946

Status of NIST time servers:

https://tf.nist.gov/tf-cgi/servers.cgi

This makes me wonder, if you take the average time of all wristwatches on the planet, accounting for timezones and throwing out outliers, how close would you get to NTP time?

And how many randomly chosen wristwatches would you need to get anything reasonable?

Close but unlikely to be precise in metrology sense. There's unlikely even a billion wrist watches being worn.

One. One watch. POTUS's watch. And in fact, that's why Boulder is currently shuttered... they disagreed.

I think this comment is referencing the government's recent announcement[0] to shut down the National Center for Atmospheric Research in Boulder. They do climate research at the Mesa Laboratory there.

It's open to the public for visits. They have a small science museum, offices, a library, etc. I highly recommend anyone with interest and opportunity to visit the mesa lab soon. It may not be open much longer. The view alone is worth the trip, and the building is cool too.

[0]: https://x.com/russvought/status/2001099488774033692

You’re the person Douglas Adams warned us about.

Comment of the year.

I have a hunch my casio wrist watch is designed to be running a bit too quick to make resetting the seconds easier. Your averaging assumes manufacturers try to make their watches as accurate as possible for average conditions

I think it runs quick to be on the safe side, so you never miss appointments, trains, etc. because of your watch.

But yes, good point.

This is the kind of thing that Casio designers would probably come up with (second to have as much accuracy as possible within their budget)

Given two time changes per year I guess something like 1 min per year is acceptable

Old sci-fi story of mine, maybe the only one ever inspired by NTP

THE TIME RIFT OF 2100: How We lost the Future --- and Gained the Past.

https://tech.slashdot.org/comments.pl?sid=7132077&cid=493082...

Cool story - thanks for sharing it!

This was an NTP 0 server right? What is the actual failback mechanism when that level of NTP server fails?

This is some level of eldritch magic that I am aware of, but not familiar with but am interested in learning.

There are lots of Stratum 0 servers out there; basically anything with an atomic clock will do. They all count seconds independently from one another, all slowly diverging over time, with offset intervals being measured by mutual synchronization using a number of means (how is this done is interesting all by itself). Some atomic clocks are more accurate than others, and an ensemble of these is typically regarded as 'the' master clock.

To quote the ITU: "UTC is based on about 450 atomic clocks, which are maintained in 85 national time laboratories around the world." https://www.itu.int/hub/2023/07/coordinated-universal-time-a...

Beyond this, as other commenters have said, anyone who is really dependent on having exact time (such as telcos, broadcasters, and those running global synchronized databases) should have their own atomic clock fleets. There are thousands and thousands of atomic clocks in these fleets worldwide. Moreover, GPS time, used by many to act as their time reference, is distributed by yet other means.

Nothing bad will happen, except to those who have deliberately made these specific Stratum 0 clocks their only reference time. Anyone who has either left their computer at its factory settings or has set up their NTP configuration in accordance to recommended settings will be unaffected by this.

There's two other sites for the time.nist.gov service so it'll be okay.

Probably more interesting is how you get a tier 0 site back in sync - NIST rents out these cyberpunk looking units you can use to get your local frequency standards up to scratch for ~$700/month https://www.nist.gov/programs-projects/frequency-measurement...

What happens in the event all the sites for time.nist.gov go down? is it included in the spec?

Also thank you for that link, this is exactly the kind of esoteric knowledge that I enjoy learning about

Most high-availability networks use pool.ntp.org or vendor-specific pools (e.g., time.cloudflare.com, time.google.com, time.windows.com). These systems would automatically switch to a surviving peer in the pool.

Many data centers and telecom hubs use local GPS/GNSS-disciplined oscillators or atomic clocks and wouldn’t be affected.

Most laptops, smartphones, tablets, etc. would be accurate enough for days before drift affected things for the most part.

Kerberos requires clocks to be typically within 5 minutes to prevent replay attacks, so they’d probably be ok.

Sysadmins would need to update hardcoded NTP configurations to point to secondary servers.

If timestamps were REALLY off, TLS certificates might fail, but that’s highly unlikely.

Databases could be corrupted due to failure of transaction ordering.

Financial exchanges are often legally required to use time traceable to a national standard like UTC(NIST). A total failure of the NIST distribution layer could potentially trigger a suspension of electronic trading to maintain audit trail integrity.

Modern power grids use Synchrophasors that require microsecond-level precision for frequency monitoring. Losing the NIST reference would degrade the grid's ability to respond to load fluctuations, increasing the risk of cascading outages.

Great list! Just double-checked the CAT timekeeping requirements [1] and the requirement is NIST sync. So a subset of all UTC.

You don’t need to actually sync to NIST. I think most people PTP/PPS to a GPS-connected Grandmaster with high quality crystals.

But one must report deviations from NIST time, so CAT Reporters must track it.

I think you are right — if there is no NIST time signal then there is no properly auditable trading and thus no trading. MFID has similar stuff but I am unfamiliar.

One of my favorite nerd possessions is my hand-signed letter from Judah Levine with my NIST Authenticated NTP key.

[1] https://www.finra.org/rules-guidance/rulebooks/finra-rules/6...

I must have one of those units oh my god

It's like a toaster oven, but it toasts time.

Someone needs to sell replicas (forgive the pun) of these.

Considering how many servers are in existence, probably the exact same procedure for starting a brand new one?

We had some fun requesting key for accessing nist time servers. the process is (quoted from website)

NIST currently offers this service free of charge. We require written requests to arrive by U.S. mail or fax containing:

Your organization’s name, physical address, fax number (if desired as a reply method).

One or more point-of-contact personnel or system operators authorized to receive key data and other correspondence: names, phone numbers, email addresses. Up to four static IPv4 network addresses under the user’s control which will be allowed to use the unique key. By special arrangement, additional addresses or address ranges may be requested.

Desired hash function (“key type”). NIST currently supports MD5, SHA1, SHA256, and HMAC-SHA256. Please list any limitations your client software places on key values, if known: maximum length, characters used, or whether hexadecimal key representations are required. If you prefer, please share details about your client software or NTP appliance so we can anticipate key format issues. Desired method for NIST’s reply: U.S. mail, fax, or a secure download service operated by Department of Commerce.

NIST will not use email for sending key data.

ps. there actually seems to be improvement over what they had year ago. they added "secure download service". and previously they had message that nobody assigned to actively monitor mailbox so if you didn't get key, please email us so we will check it

Can anybody speak to the current best practices around running underground power lines? I see these types of articles about above-ground distribution systems from time-to-time, particularly in California. I feel lucky that my area has underground power, but that was installed back in the 1980s. Would it be prohibitively expensive for Boulder’s utility provider to move to underground distribution? I can’t help but think it could be worth the cost to reduce wildfire risk and offer more reliable service.

1/3-1/2 of the cost of the electricity we pay is distribution.

Some of it is physical infrastructure (transformers, wire, poles), but a lot of it is labor.

Labor is expensive in US. It’s a lot of labor to do, plus they’ll likely need regulatory approval, buying out land, working through easements.

At the same time you have people screaming about how expensive energy is.

Furthermore they have higher priorities, replacing ancient aging infrastructure that’s crumbling and being put on higher load every day.

Think of it like this: overhead power lines require you to dig a 5-7’ deep hole that’s 2’ in diameter every 90’. Underground power supplied through cable requires you to bury the cable minimum 3’ in the ground in rigid ductwork the entire 90’. Any time that cable runs under a roadway that ductwork needs to be encased in concrete. In urban and semi urban areas you also compete with other buried infrastructure for space - sewer, city/municipal infrastructure, gas, electrical transmission, etc.

While underground distribution systems are less prone to interruption from bad weather it depends on the circuit design. If the underground portion of the circuit is fed from overhead power lines coming from the distribution substation you will still experience interruptions from faults on the overhead. These faults can also occur on overhead transmission circuits (the lines feeding the distribution substations and/or very large industrial customers).

Underground distribution comes at a cost premium compared to overhead distribution. It’s akin to the cost of building a picket fence vs installing a geothermal heating system for your home. This is why new sub divisions will commonly have underground cable installed as the entire neighborhood is being constructed - there’s no need to retrofit underground cable into an existing area and so the costs are lower and borne upfront.

It’s more cost effective for them to turn the power off as a storm rolls through, patrol, make repairs and reenergize then to move everything underground. Lost revenue during that period is a small fraction of the cost of taking an existing grid and rebuilding it underground. This is especially true for transmission circuits that are strung between steel towers over enormous distances.

Its very hard to repair and keep track of underground.

https://practical.engineering/blog/2021/9/16/repairing-under...

Germany here, never heard of any issues regarding underground power (or phone) lines. Ultra High voltage (distribution network) is above ground here, but no issued with that either.

Boulder County is working on utility undergrounding, https://bouldercolorado.gov/services/utility-undergrounding, and in particular they are working on undergrounding at Chautauqua, https://bouldercolorado.gov/news/undergrounding-chautauqua, which is next door to the NIST facility.

So far I think I'm still seeing one of them in my peers list for my public-ish NTP server:

         remote           refid      st t when poll reach   delay   offset  jitter
    ==============================================================================
    +time-e-b.nist.g .NIST.           1 u  372 1024  377  125.260    1.314   0.280

...and maybe it's gone:

    #time-e-b.nist.g .NIST.           1 u 1071 1024  377  125.260    1.314   0.280

The referenced mailing list is this Google Group (https://groups.google.com/a/list.nist.gov/g/internet-time-se...) which has some other posts about this incident.

Where are you seeing the other posts?

One question I have is did DOGE decisions have anything to do with this? Because I know they took knives to NIST.

Actually DOGE involvement at the highest level would have resulted in Tesla solar and Tesla powerwall battery backups.

Lol, lmao.

Some relevant DOGE’s effects:

-time and frequency division director quit

-NIST emergency management staff at least 50% vacant

-NIST director of safety retired, and NIST safety was already understaffed when compared to DOE labs

-NOAA emergency manager on the same Boulder campus laid off

etc

Any day now

> […] Tesla solar and Tesla powerwall battery backups.

Don't forget Solar Roof.

Apparently no engineers here anymore, all armchair politicians.

When the politicians take a hatchet to the underpinnings of society that we built, we have to get political.

So sad, we used to innovate and stay one step ahead of them. That’s how wealth is created.

Residents and some businesses of Boulder have been without power since Tuesday. There was an issue about 10 years ago which caused 1000 homes to burn down and the power company was found liable. They change their actions. Then during the next high wind event, the power company preemptively cut power and businesses sued them for loss of revenue. Now the power company is playing it safe and turning off power to residents and keeping downtown businesses powered.

Maybe their generator failing was DOGE related, but wouldn’t have happened if state level shenanigans were better handled

The Marshall fire was 4 years ago. Almost to the day.

Direct link, rather than a repost: https://groups.google.com/a/list.nist.gov/g/internet-time-se...

My local GPS + PPS based NTP server finally pays off.

It’d be a good idea to protect our infrastructure from the climate we created.

It’s just a good idea, though, not a greedy one… so it won’t happen.

Man, they're having a hell of a time up in Boulder.

I just got home from a holiday party where two people from NIST in Boulder work on the NIST-F1 Atomic Clock. The one scientist described the outage and the failures but reported that things are still shut down even after power was restored. She told me that she believes that the Trump administration is in the process of shutting down the program and server in Boulder. And there was low confidence in that the Washington DC superiors understood what they are doing. God I hope this isn't more Tina Peters retribution crap. Cutting off our nose to spite our face.

Generator maintenance is a thing.

This is terrible. It’s always sad to hear about things like this.

Well, where did NTP at NIST last put it? Did they look there?

You misunderstand, there's been a coup

We have to stop those knaves pushing PTP! NTP must prevail!

Of course there is. Where else would they put the reference standard chickens?

For future reference of civilization: if a facility is critical, it must have a SMR.

It’s fine. The public pays for sci-fi clocks used by NIST and the Navy and we get shit latency over NTP and a WWVB signal that barely reaches a huge chunk of the country. CLOCKS WE PAID FOR. Jane Street gets lightning access to clocks and our pension managers get their NTP trades front run. NTP is a disgrace and an insult when it is working.

The rest of the snark/ bitterness aside ... NTP takes latency as a constraint, and accommodates for it.

And far from a disgrace, NTP was a brilliant design for its time, and has proven to be far more future-proof than should have been expected.

“snark bitterness side” I see so I’m not entitled to my feelings and I’m holding it wrong. No. It’s a disgrace. The latency is shit the precision is shit and WWVB to go with it is an insult.

Future proof? Are you living in the same future I am where our trades are front run? I notice you didn’t engage with the substance of my attack at all.

Reply on news.ycombinator.com