Introducing architecture variants

If you aren't convinced by your ubuntu being 1% faster, consider how many servers, VMs and containers run ubuntu. Millions of servers using a fraction of a percent less energy multiplies out to a lot of energy

If you would only accept 10x improvements, I would argue progress would be very small.

Standard advice: You are not Google.

I'm surprised and disappointed 1% is the best they could come up with, with numbers that small I would expect experimental noise to be much larger than the improvement. If you tell me you've managed a 1% improvement you have to do a lot to convince me you haven't actually made things 5% worse.

"Well, let's say you can shave 10 seconds off of the boot time. Multiply that by five million users and thats 50 million seconds, every single day. Over a year, that's probably dozens of lifetimes. So if you make it boot ten seconds faster, you've saved a dozen lives. That's really worth it, don't you think?"

I put a lot of effort into chasing wins of that magnitude. Over a huge userbase, something like that has a big positive ROI. These days it also affects important things like heat and battery life.

The other part of this is that the wins add up. Maybe I manage to find 1% every couple of years. Some of my coworkers do too. Now you're starting to make a major difference.

I don't think this is a valid argument to make. If you were doing the optimization work then you could argue tradeoffs. You are not, Canonical is.

Your decision is which image you want to use, and Canonical is giving you a choice. Do you care about which architecture variant you use? If you do, you can now pick the one that works best for you. Do you want to win an easy 1% performance gain? Now you have that choice.

Perhaps if you're doing CPU-bound math you might see an improvement?

Well one example could be llama.cpp . It's critical for them to use every single extension the CPU has move more bits at a time. When I installed it I had to compile it.

This might make it more practical to start offering OS packages for things like llama.cpp

I guess people that don't have newer hardware aren't trying to install those packages. But maybe the idea is that packages should not break on certain hardware.

Blender might be another one like that which really needs the extensions for many things. But maybe you so want to allow it to be used on some oldish hardware anyway because it still has uses that are valid on those machines.

  > where that 1% is worth any hassle

Let's say you have a process that takes 100hrs to run and costs $1k/hr. You save an hour and $1k every time you run the process. You're going to save quite a bit. You don't just save the time to run the process, you save literal time and everything that that costs (customers, engineering time, support time, etc).

Let's say you have a process that takes 100ns and similarly costs $1k/hr. You now run in 99ns. Running the process 36 million times is going to be insignificant. In this setting even a 50% optimization probably isn't worthwhile (unless you're a high frequency trader or something)

This is where the saying "premature optimization is the root of all evil" comes from! The "premature" part is often disregarded and the rest of the context goes with it. Here's more context to Knuth's quote[0].

  There is no doubt that the holy grail of efficiency leads to abuse. Programmers waste enormous amounts of time thinking about, or worrying about, the speed of noncritical parts of their programs, and these attempts at efficiency actually have a strong negative impact when debugging and maintenance are considered. We should forget about small efficiencies, say about 97% of the time: premature optimization is the root of all evil.

  Yet we should not pass up our opportunities in that critical 3%. A good programmer will not be lulled into complacency by such reasoning, he will be wise to look carefully at the critical code; but only after that code has been identified.

So yes, there are plenty of times where that optimization will be worthwhile. The percentages don't mean anything without the context. Your job as a programmer is to determine that context. And not just in the scope of your program, but in the scope of the environment you expect a user to be running on. (i.e. their computer probably isn't entirely dedicated to your program)

[0] https://dl.acm.org/doi/10.1145/356635.356640 (alt) https://sci-hub.se/10.1145/356635.356640

Since then we've slowly started accumulating optional extensions again; newer SSE versions, AVX, encryption and virtualization extensions, probably some more newfangled AI stuff I'm not on top of. So very slowly it might have started again to make sense for an approach like Gentoo to exist**.

* usual caveats apply; if the compiler can figure out that using the instruction is useful etc.

** but the same caveats as back then apply. A lot of software can't really take advantage of these new instructions, because newer instructions have been getting increasingly more use-case-specific; and applications that can greatly benefit from them will already have alternative code-pathes to take advantage of them anyway. Also a lot of the stuff happening in hardware acceleration has moved to GPUs, which have a feature discovery process independent of CPU instruction set anyway.

I used Gentoo a lot, jeez, between 20 and 15 years ago, and the install guide guiding me through partitioning disks, formatting disks, unpacking tarballs, editing config files, and running grub-install etc, was so incredibly valuable to me that I have trouble expressing it.

As in, are there any common libraries or parts of the system that typically slow things down, or was this more targeting a time when hardware was more limited so improving all would have made things feel faster in general.

The extra issue here is that SIMD (the main optimization) simply sucks to use. Auto-vectorization has been mostly a pipe dream for decades now as the sufficiently-smart compiler simply hasn't materialized yet (and maybe for the same reason the EPIC/Itanium compiler failed -- deterministically deciding execution order at compile time isn't possible in the abstract and getting heuristics that aren't deceived by even tiny changes to the code is massively hard).

Doing SIMD means delving into x86 assembly and all it's nastiness/weirdness/complexity. It's no wonder that devs won't touch it unless absolutely necessary (which is why the speedups are coming from a small handful of super-optimized math libraries). ARM vector code is also rather Byzantine for a normal dev to learn and use.

We need a more simple assembly option that normal programmers can easily learn and use. Maybe it's way less efficient than the current options, but some slightly slower SIMD is still going to generally beat no SIMD at all.

[0] https://oscarlab.github.io/papers/instrpop-systor19.pdf

Would be nice to know the per app metrics.

Not the same thing, or perhaps an augmentation of Intel performance libraries (which required C++, I believe).

Sure, harmonizing all of this may have suggested that there were too many software teams. But device drivers don't write themselves, and without feedback from internal software developers, you can't validate your CPU designs.

That said, most of those packages will just read the hardware capability from the OS and dispatch an appropriate codepath anyway. You maybe save some code footprint by restricting the number of codepaths it needs to compile.

There’s also the difference between being able to run and being able to run optimised. At least 5 years ago, the Ubuntu/Debian builds of FFTW didn’t include the parallelised OpenMP library.

In a past life I did HPC support and I recommend the Spack package manager a lot to people working in this area because you can get optimised builds with whatever compiler tool chain and options you need quite easily that way.

If you do a typical: "cmake . && make install" then you will often miss compiler optimisations. There's no standard across different packages so you often have to dig into internals of the build system and look at the options provided and experiment.

Typically if you compile a C/C++/Fortran .cpp/.c/.fXX file by hand, you have to supply arguments to instruct the use of specific instruction sets. -march=native typically means "compile this binary to run with the maximum set of SIMD instrucitons that my current machine supports" but you can get quite granular doing things like "-march=sse4,avx,avx2" for either compatibility reasons or to try out subsets.

Especially the binaries for the newest variant, since they can entirely conditionals/branching for all older variants.

https://man7.org/linux/man-pages/man2/ptrace.2.html