3D Printing | Hacker News Reader

3D Printing

1 pointmonicaaa3 comments

As a beginner in 3D printing, how can I optimize settings and orientation for game character models downloaded from a 3D marketplace to reduce supports, minimize print time, and ensure a smooth finish on my FDM printer?

View on HN

I learned the biggest improvements came from orientation and support settings. For example, orienting the model to reduce overhangs drastically cuts down on support needs and post-processing. On models from platforms like https://www.gambody.com/stock , I’ve noticed they’re often split into parts designed with FDM in mind, which really helps with clean finishes and faster prints. I usually slice with lower layer heights (around 0.12 mm for detailed areas), slow down the print speed, and raise the temperature slightly for better flow. It’s also worth experimenting with tree supports in Cura or using custom supports in PrusaSlicer to only place them where absolutely needed. Every model is different, so testing orientations and printing smaller test parts first can save you time and frustration.

Long story short: you have to adjust the model itself. Video game meshes aren't made for 3D printing and especially aren't optimized for FDM-style additive manufacturing. You have to apply the lessons you learned from mechanical 3D print prep; no freestanding objects, make sure everything connects to the base of the print. Even then, it's going to take time to get it right and you'll almost inevitably need supports if you're not using a resin vat printer.

It's a laborious process, sadly. For simpler character models (eg. Toad from Mario) it probably wouldn't be hard to fix up. If you intend to 3D print Vicar Emilia though, you've got a lot of work cut out for you.

Game character models or like the warhammer type models are hardcore for some kinds of printers. If you're using a $300 clone printer you're going to want that dialed in really well before you even attempt printing.

Then, you have alot of designers who optimize their stances and such relative to the orientation they provide. So to try to optimize it better than them is a higher skill you learn from experience.

As a begineer, go with the orientation the designed made it; within reason obviously.

>and ensure a smooth finish on my FDM printer?

After your printer is tuned well. This is all about layer height.

I would note as well, most of these intricate character prints are usually done with an SLA or SLS printer. FDM really struggles at these.

Reply on news.ycombinator.com