Flat lens offers a perfect image
seas.harvard.edu
seas.harvard.edu
Operating at telecom wavelengths (i.e., the range commonly used in fiber-optic
communications), the new device is completely scalable, from near-infrared to
terahertz wavelengths, and simple to manufacture.
Ho ho, very clever use of words there. Terahertz is far-far infrared, (1mm to .1mm (1,000,000-100,000nm) wavelength) while NIR is around 1,000nm. Visible light is 740-380nm.To the best of my knowledge, (this isn't my field) nobody has ever made a visible-light metamaterial. The antennas are too small. There's no real physical reason we can't make red-light metamaterials, the problem is just fabrication. (A parallel can be drawn here between metamaterials, desktop nanofactories, and fusion reactors)
Additionally, it would be tricky to make a panchromatic metamaterial lens: metamaterials are tuned very precisely to one frequency, (color) constrained by the physical size of the antennas, and they can't transmit any others.
You would be wrong, see this CalTech press release: http://media.caltech.edu/press_releases/13341
However the thing that makes this interesting is that every single SFP+ single mode fiber tranciever (and if you've got a datacenter you probably have a lot of those) has a glass lens which focuses the light from the fiber onto the detector. Losses in the system affect how far you can run that fiber and/or how bright the laser at the source end needs to be. So this invention has the potential of making those connections both cheaper (easier to manufacture) and more efficient (no light lost due to abberations in the lens). So that is a pretty big deal.
USC professor Tim Strand was doing research into holographic lenses back in the early 80's. Basically trying to create a white light hologram of a lens system. Cool concept that didn't get far enough unfortunately. (I kept hoping one day we'd have a sticker you put put on your sunglasses and it would turn them into prescription glasses for you.)
Metamaterials for visible light wavelengths do exist. One that got note in the press a few years ago has a negative index of refraction.
Panchromaticity could be accomplished via a color array scheme similar to what is already common in lithographic optic devices.
This not being your area is precisely why you should extend the researches some respect, rather than immediately pouncing on any plausible rhetorical trick to make yourself seem expert when you are not.
Of course it's annoying when they are overly optimistic(either because of journalists trying to make the finding interesting, or researchers trying to get more funding), but that's to be expected.
If you had read the article you would know precisely what wavelengths the device is applicable to (3rd paragraph even), and why it's an exciting research development.
The flat lens eliminates optical aberrations such as the “fish-eye” effect that results from conventional wide-angle lenses.
Surely you wouldn't claim that is referring to wide-angle thermal lenses?
“In the future we can potentially replace all the bulk components in the majority of optical systems with just flat surfaces,” says lead author Francesco Aieta, a visiting graduate student from the Università Politecnica delle Marche in Italy. “It certainly captures the imagination.”
Oh yes it does. If you help the imagination along with misleading phrasing, that is. If you don't believe me, just read the rest of the comments here, most of them expecting to see some application in photography.
If you get good glass it'll beat the resolution/noisiness of your sensor anyway. Distortion and aberration can be fixed in software quite well; it sure beats waiting that won't come for a long, long time, if even ever.
Don't get me wrong, this is cool for what it actually applies to, but flirting with "capturing the imagination" in such ways gets no respect from me.
http://eurekalert.org/pub_releases/2007-01/dl-mft010407.php?...
http://www.photonics.com/Article.aspx?AID=42007
http://www.popsci.com/science/article/2012-04/nanofishnet-co...
Edit: WRONG! As sbierwagen points out[1], even though the press release states that the technology is "completely scalable" [to different wavelenghts of light], it actually works only with wavelengths greater than that of visible light. Too bad :-(
sbierwagen: Thanks for the clarification.
But as the primary light gathering element, no.
This is certainly beyond my field of expertise, but I don't see how the inability of this new lens to focus in the range of visible light detracts from the main point of it being a distortion-free lens whose "focusing power approaches the ultimate physical limit set by the laws of diffraction."
Although I agree that the press release makes it appear as if this will have direct implications on imaging in the lay sense (this isn't going to make a future iPhone the perfect camera), there are certainly applications of such technology that aren't consumer-focused and don't require visible light that stand to benefit from this research.
As blacksmythe notes, the lens created is not your stereotypical refractive lens, but is more along the lines of a Fresnel lens or zone plate. I'd be interested in hearing more about the differences between the two, especially with regard to the limitations of each. Would anyone who read the write up in Nano Letters or has a better understanding care to comment more on the implications?
I agree the press release is a tad sensationalistic and possibly (intentionally) misleading — but what do you expect from a press release? Although the findings presented may not be as earth-shattering as a mass-produceable visible-light metamaterial, I still think it's a noteworthy development that shouldn't be dismissed so easily.
In order to achieve broadband operation, the phase change vs wavelength of the metamaterial needs to approximate a large delay. If a large delay is not feasible to implement, this summary is overstating the importance of this result compared to prior technology.
The thing about a lens it is lets you grab a relatively huge area of light and sort it all out so the right bits go to the right pixels.
I already did arithmetic once today (erroneously as it has transpired), so I'll pass on this, but although a metric dumptruck load of photons fly off ov things, when you are 10 meters away, and have an image element the size of a CMOS pixel, there aren't a lot of photons per second to let you sort out 256 levels of intensity without random noise.