Yes, this was one of our initial considerations when we first started, and the telecom analogy of the original Erlang development application was one of the main reasons we took this approach. Now, we only "stream" metadata, control data, and status. Even though we manage video pipelines and color correctors, the video stream itself is always handled separately.

For anyone interested in the video stream itself, here's a summary. On-site, everything is still SDI (HD-SDI, 3G-SDI, or 12G-SDI), which is a serial stream ranging from 1.5Gbps (HD) to 12Gbps (UHD) over coax or fiber, with no delay. Wireless transmission is typically managed via COFDM with ultra-low latency H.264/H.265 encoders/decoders, achieving less than 20ms glass-to-glass latency and converting from/to SDI at both ends, making it seamless.

SMPTE 2110 is gaining traction as a new standard for transmitting SDI data over IP, uncompressed, with timing comparable to SDI, except that video and audio are transmitted as separate independent streams. To work with HD, you need at least 10G network ports, and for UHD, 25G is required. Currently, only a few companies can handle this using off-the-shelf IT servers.

Anything streamed over the public internet is compressed below 10 Mbps and comes with multiple seconds of latency. Most cameras output SDI, though some now offer direct streaming. However, SDI is still widely used at the end of the chain for integration with video mixers, replay servers, and other production equipment.