Hacker News Reader

Comment by nkrisc | Hacker News Reader

> Only a single ethernet port in the basement. Then the kid wanted a gaming station and we moved where the TV was. I should have put like 4 down there.

https://store.ui.com/us/en/category/all-switching/products/u...

Unless you meant with regards to routing the cables throughout the space, like now it’s on the opposite wall from the port.

I’ve definitely shoved cables under baseboards, but you can also pull them off and the run the cable in the wall behind them. You don’t even need to patch the drywall then. You can also get baseboards (that look nice in a home) then double as cable runs.

View on HN

> You can also get baseboards (that look nice in a home) then double as cable runs.

Interesting. That would be great in the basement. I will look into it.

Dont forget Powerline adapters - if you have it all on one loop they are surprisingly effective if you have extra power sockets!

If you go that route MOCA over your cable tv coax works very well too!

I recently bought my first house, and there was only one coax outlet in the entire place, and zero ethernet. I wanted to move where the coax terminated, and after some searching around, found MOCA. Had never heard of it before, but a hundred bucks or so later, and it's a fantastic solution.

for those of you using MOCA, what kind of bandwidth do you get? And what kit would you recommend?

I ask, as my brother-in-law just finished a house where he had asked the contractor to put in internet cabling everywhere, and... drum roll... yes the contractor put in coax everywhere. I tried powerline adapters, but could only get ~30-40mbps (he has a 1gbps fiber connection from the ISP) over them.

I use the MoCA 2.5 adapter by goCoax. I won't say I recommend it since I haven't compared it to other adapters, but it appears to do what I want it to do and I get about 2Gbps through the adapters. Every one I could find seemed to be around the same price point ($60-$80 per adapter) so I just went with a well reviewed one.

I would definitely recommend if fishing cat6 is not an option and you would need to open up walls. Unless your BIL has a lot of kids and their friends over who all like to stream different 4k movies from a NAS, I can't imagine any normal user with 1gbps WAN finding 2gbps LAN insufficient.

I think powerline adapters might work very well in the UK, where sockets on each floor are connected in a ring.

In my small apartment in Denmark, with new wiring, they are terrible. I get about 30-50Mb/s rather than the advertised 1200Mb/s. I assume the signal has to go back to the distribution board to get between my adapters.

Take a look at orac decor. They have special baseboards for this

Reply on news.ycombinator.com