What do you do with your Mini PC? I was interested in one but I just used an old thinkpad to run some stuff instead
The form factor is very convenient, two of them are my mother and my wife's "desktop" pcs - they're both attached to their monitors and, with wireless keyboards and mice they stay discreet and don't take up a lot of room but are very good desktops for daily email reading, recipe browsing and facebooking. My mother and wife don't complain about them - they're more interested in the the compact size and staying out of the way than the performance.
Two of them are small servers that I run stuff that my Raspberry Pis can't handle (I still don't have a Pi 5, WAY too expensive around here) - quick, low noise and isn't too power hungry. Runs linux perfectly and I never have a problem with software (the n100 is a great little CPU). I have 2 because of some weird sale on Aliexpress - 2 for the price of 1-and-a-half was something I couldn't pass up on.
The final one is attached to our main TV, it's a converted TV box (running Armbian) that's an amazingly powerful piece of cheap hardware. It's our main movie viewer (off of our DLNA NAS) it can hand 1080p video just fine on a crappy 5V power supply.
I ask all this because I'm sick of my android tv boxes locking up about once a month, and I'd like something a little more powerful.
I run: Jellyfin, Home Assistant, VPN, Nextcloud, Qbittorrent. More things are on https://selfh.st
Everything is in Docker + Portainer. Makes it super easy to manage. The setup uses 17 watts.
THe n100 is tiny, but has enough power to run 3-8 VMs. I used to use KVM, but moved recently to proxmox after I wore out the disk.
I still have some Pis about to do GPIO stuff, but for _serving_ I used x86
Each n100 has an average power draw of < 8watts at the wall (thats when doing lots of CPU.)
Nice to see Asus have finally started doing something with them.
I see there's lots of competition (or at least, lots of options) in that space now.
I initially considered a rpi5 + SATA HAT because I don't need much power and the N100 is definitely more power hungry than a RPi but the price tag that included 16gb ram and 512gb SSD convinced me to buy the minipc.
I also considered buying a N100 motherboard with 4-6 SATA port to not rely on a single usb port for the NAS port but it was more expensive than the PC and without RAM or hard drive
I use them as xcp-ng hosts.
Depends on really what do you want to do. For just data storage, NAS, pretty much anything goes. If you want to run VMs, Docker etc. you want something newer. Personally I use Optiplex Micro 3080 with i5-10500T. That was 270€ refurbished.
>Do any of these support ECC ram
No, as far as the Dell, Lenovo, HP mini PCs goes.
>And would you say mirrored ZFS is good enough for home use?
Yes but reading your use case you probably don't want a mini PC. You can only have 1x 2.5" SSD and 2x NVMe SSD. A single 8TB NVMe SSD is currently 1000€ and you would need two. Unless you want something smaller of course.
I think most of my use-case could be covered by one or more mini pcs, since I mostly run stuff like Home Assistant and other small things in containers. But for storage I'm not sure what makes sense now. I went with zraid2 back then (in 2015) because I already had four of the 3TB disks, so purchasing two more was worth it for the cost and extra parity drive.
But now I'm not sure if ZFS is the right choice. I think now you can expand pools with more disks, in theory anyway, but I never tried it.
I don't know what options I should consider, and why. Unraid for example looks promising, since you can just keep adding disks.
Realistically most of what I have on the server is replaceable, I really only care about personal photos/videos/documents.
If I am replacing hardware to lower power consumption/electricity cost, spending lots of money to do so does not really make much sense. I would very much like to get 90W+ of heating power out of my home office though, it's noticeably cooler in the room if I turn off the server and other computer(s). Less spinning disks and less hardware would help with that part, but other than making the office cooler I don't think I would save that much money (initially anyway).
The disks I have are from 2015, so probably better to make a choice for hardware/disks now than having to emergency purchase one or more of them to replace failing ones.
You should look around on /r/homelab there are some nice low power consumption builds there, for example this one
https://www.reddit.com/r/homelab/comments/1935nar/homelab_na...
Some vendors on eBay allow you to make an offer for a lower price, it’s worth a try.
Basically a small server for self-hosted applications.