Those boiling water tanks would be very hard for a child to access without a lot of effort. Those boiling taps are sometimes close to the cold/warm water tap.
This problem is solved in its entirety by simply microwaving a cup of water. No wasted water.
If the same / similar cup is used, one can choose the desired temperature of the resultant hot water simply by varying the time. Seasonal variation of ambient water temperature may need to be taken into account.
I tend not to drink coffee, and I prefer to make tea with less-than-boiling water.
YMMV
</opinion.
Now that I’ve written that, I’ll have to put a power meter on the microwave and a kettle and report back with the results. My kettle recently broke and I hadn’t intended to replace.
If a microwave was more efficient, I'd expect to see premium kettles that used microwaves instead of a simple heating element, though maybe there'd be design problems with preventing leaking microwaves.
For my use cases, I’m not looking to actually boil the water, bringing it up to 80 plus degrees suffices.
The inefficiency kettles bring is the tendency of certain users to heat way more water than their immediate needs.
220ml, regular ceramic mug, one minute forty, does what I need, but I’m not tea or coffee connoisseur, just a prole with a box of Twinings loose leaf.
Thanks for the kettle reference, I have been meaning to find a temperature controlled unit.
I recently picked up an inexpensive Thomson branded electric frypan with digital temperature and time controls, well impressed.
The 3L tank that holds the hot water, under the sink is well insulated and it takes almost nothing to keep it at temperature.
Given that it uses such negligible energy that I needn't care, the benefits of instant boiling water whenever we like and not having an extra appliance no the counter-top make it a clear winner for us.
My wife drinks tea (I'm a coffee drinker) and I make tea (just simple, English Breakfast with milk) for her quite often, and we both use it for cooking. It was something she'd always wanted, and she's not much into "gadgets" but she's been very happy with this, so I'm happy.
There's several around - I've got one that allows you to choose between 70°C, 80°C, 90°C and boiling (along with a keep-warm option that's never used). I use the 80°C option all the time for making coffee (Aeropress) and use the 70°C for things like green tea (black tea should be 100°C of course).
It's a mistake to use boiling water when making coffee - it'll extract a bitter flavour.
That's really cool, I suppose I haven't really looked, being a coffee drinker, a kettle was never important to me.
> It's a mistake to use boiling water when making coffee - it'll extract a bitter flavour.
I have two espresso machines, one in the kitchen and one in my home office, I also have an Aeropress like yourself, love it, but I only use that for travelling. Wouldn't dare pour boiling water over my freshly ground coffee :)
The only annoying thing about it is that the fill indicator is rather hidden by the handle, but otherwise we really like it.
I never understood why so many kettles always put the fill indicator behind the handle, which of course you'd be holding when filling it up. The first time I saw one with a large, clearly graduated window on the side (and wasn't also a cheap, white plastic kettle) I was impressed, being the nerd I am.
The biggest problem I've had so far was that Amazon seems to only stock used/counterfeit units. Buying direct from OXO got me on that hadn't been used and didn't reek of volatile organic compounds on the first try.
This is slighly terrifying; and interesting that something like this would be counterfeited. I too would make any and all efforts to ensure I was using something legit where mains (240V for me) are concerned.
I once bought a knock-off hot-air soldering station without knowing, and once I looked into it, people were complaining they'd received units where the live was "grounded" to the case.
I opened mine to check, not quite as bad, but the live in mine wasn't attached to the metal case, just bare, and within about 1cm of it. I reported it to the retailer (we all know which major online retailer this was), and they did nothing. Let's just say things changed, seriously, for me that day when it comes to buying anything mains powered with uncertain origins.
ThermoWorks refused to sell their products on Amazon for quite a while. Apparently they've changed their stance but I wouldn't risk it.
Anyways the kettle is nice to have that I use daily for coffee even though I now have an induction stove with burners that are far more powerful than the kettle. Stateside, circuits for electric ranges are 240V, 50A (occasionally 40A on older buildings).
> Even if I didn't despise Bezos
Why do despise him?Hot drinks can be a bit of a ritual, as I'm sure you understand as an aeropress user, so I don't mind a bit of work to get the right brew if I need to do it, in fact one of the things I enjoy about taking my aeropress when I'm travelling whether camping or any other break, is having my coffee ritual with me.
The energy usage is indeed minimal; I've measured it with a power meter over a couple of months and barely used a fraction of a kWh.
There are other boiling water taps, but Quooker is incredibly well built, really simple, and was created in an era of making things to last, it's got a price tag to match, but well worth it in our households opinion.
When a kitchen serves 100+ people things like limescale will inevitably be a problem. If the steaming hot water tap is plumbed in, with replaceable water filters and a regular service contract - that's an advantage, not a disadvantage.
Steaming hot water taps can supply lots of hot water fast, so even if a load of people are making drinks at the same time in between meetings, they can keep up.
There's also a safety argument that if you've got a kettle and a mug, that's two things of boiling water you could drop, and eliminating one of the two makes things safer. And because the steaming hot water tap is directly above a drain, the impact of a spill is much reduced. And a lot of these taps make water that is steaming but somewhat below boiling, which might be safer or something?
Not sure why you'd want one for home though.
I know they exist but I've only ever seen one house with such a tap and that was a very well off family member. I don't think these are terribly common.
It's a quite deliberate and slightly difficult action to activate the boiling water, there's a ring around the base of the spout that you have to double-press and twist on the second press, completely independent of the normal cold/hot water.
I have two young children and honestly, I'm not concerned either for them, my wife, nor myself that there's any risk.
Using the microwave is a perfectly good solution I think, but I don't know many people who do that, and although it's fine for tea etc for one person, it won't do a house-full of cups of tea in seconds, nor fill a pan with boiling water.
I wouldn't dare to suggest that it's the best thing for everyone, but we are extremely happy with its utility in our home.
EDIT: Typos
How's your experience been? Do you preheat your mug before brewing? I like tea strong and dark!
As for pre-heating, I tend to use it to pre-heat my wife's tea mug and my coffee cup before I brew with the espresso machine in the kitchen, by filling it part way for a few seconds and then pouring away; mostly to take the chill off, as our kitchen can be cold in the mornings.
I know there are lots of other cheaper brands but my understanding from researching several of them a few years back was that many/most of the cheaper ones won't keep up with the Quooker, won't be as reliable, and likely won't have the after sales support as a product from a company that specialised in that single product. There are the office ones you speak of but they're been weaker performing in my anecdotal experience of our office, and often come with service contracts.
I have never seen that anywhere at houses I visited in France, Germany, Italy, Poland, a few US.
I am not saying that this is not a thing, it is just that "so many" depends on the demographics.
Different teas require different and specific temperatures for optimal results. A hot water tap cannot do this. I love the minimalism in the product design for this!
Adding a boiler I'd guess would double the price, so I think it's a good decision to leave off.
The cheapest ones are about 10x the cheapest kettles. Can't imagine wanting to go back to a kettle personally.
I reckon hipsters will be drinking filter in a few years' time, if they aren't already.
As for hot water taps for tea, if you are brewing black/red tea that is usually not good enough as they don't produce truly boiling water, although some do claim to.