Looks like a free energy scam, no?
My guess is that “membrane” used to facilitate hydrogen extraction is going to a bitch to maintain. Probably any kind of impurity with render the system FUBAR.
However, there are absolutely ways to fill a vehicle's water tank with water, use some catalyst to liberate H2, and then combining with pure O2 or O2 scavenged from ambient air in a fuel cell to generate electricity.
In underwater vehicles, because they're surrounded by water, you avoid the need to carry a water tank around and instead, you can just carry an Aluminum (typically an Aluminum compound designed to prevent formation of a reaction inhibiting oxydized aluminum layer). The Al reacts with water to produce H2 on the vehicle which is then used with a fuel cell to produce elctrucity.
This is not "free energy" - the energy potential is resident within the catalyst, and the catalyst itself must be 're-energized' or replaced. In the case of oxidized Aluminum, you must inject large amounts of energy to regenerate the pure aluminum catalyst.
What exactly is the issue, and where are your citations supporting your argument?
1. "Thermodynamics of High Temperature Gases" by Joseph Hilsenrath and Bertrand Hirschfelder, which discusses the breakdown of water at extreme temperatures.
2. "Thermodynamics of High Temperature Gases" by Joseph Hilsenrath and Bertrand Hirschfelder, which discusses the breakdown of water at extreme temperatures.
Joseph Hilsenrath was an employee at the National Bureau of Standards in the 1960s. It seems he was involved in making tables concerning gases, but not in catalysis.
There appears to be no publications by Bertrand Hirschfelder.
How did you come across this apparently obscure publication, and why are your [1] and [2] the same?
It seems gauche to suggest it, but my experience with LLMs is they often give bad citations like this. If you are using a second-hand source for your information, you may want to verify they are not giving you LLM swill.
I ask because your summary of what a catalyst means is pretty poor, and I wanted to see what your source material says.
For example, as https://en.wikipedia.org/wiki/Catalysis points out, a catalyst does not alter the equilibrium constant. It adds that if a catalyst were to change the equilibrium constant, the result "would be a perpetual motion machine, a contradiction to the laws of thermodynamics."
Then if we go to https://en.wikipedia.org/wiki/Electrolysis_of_water we see "The decomposition of pure water into hydrogen and oxygen at standard temperature and pressure is not favorable in thermodynamic terms".
Higher temperatures work "because the electrolysis reaction is more efficient at higher temperatures. In fact, at 2500 °C, electrical input is unnecessary because water breaks down to hydrogen and oxygen through thermolysis. Such temperatures are impractical; proposed HTE systems operate between 100 °C and 850 °C.", says https://en.wikipedia.org/wiki/High-temperature_electrolysis .
Thus, raising the temperature in order to shift the hydrolysis equilibrium constant, as you described it, cannot be characterized as catalysis.
That does not exactly fit the definition of a catalyst, to put it politely.
Honest question: are you trolling, or do you simply need a refresher on the basic principles of thermodynamics?
Some catalysts do get "degraded" over time and need to be regenerated. Look up palladium sintering or zeolite coking. The catalyst itself is not "damaged" but by catalyzing a reaction, its physical shape is altered (get clogged or fused together) which reduce its effectiveness. These can be regenerated by burning off the clogging or heating them up.
And if you get into the enzymes, which are biological catalysts, they are even more likely to degrade and need to be replaced.
Don't try to be smart by insulting others when you yourself are not an expert.
That is NOT a catalyst, as roelschroeven correctly commented.
Otherwise a rechargeable battery would be a "catalyst" because it too needs to be re-energized or replaced.
What a catalyst does is lower the activation barrier between two states, without providing net energy. Getting H2 from H2O, i.e. electrolysis, requires adding energy. We know this because fuel cells work in the other direction to produce power, and entropy always increases.
If oxygen is bound to the aluminum oxide, and requires energy to remove, it is not a catalyst.
Why are you capitalizing Aluminum and Oxygen?
Maybe that's now what was meant, maybe they were indeed talking about the catalyst being degraded. But then it's a bit weird to talk about "re-energizing", and more importantly, that still doesn't the main question: what is the energy source?
Am I too hostile towards claims that energy can be made out of nothing? Maybe. I know I don't feel guilty when exposing fraudulent claims.
catalyst [2] - "a substance that enables a chemical reaction to proceed at a usually faster rate or under different conditions (as at a lower temperature) than otherwise possible"
1. https://www.esafety.gov.au/young-people/trolling#:~:text=Tro....
2. https://www.merriam-webster.com/dictionary/catalyst
I guess I'm missing something. The poster asked a question, I provided an honest response based on my professional experience. I believe this is in the positive collaborarive spirit of HN. I'm just trying to contribute information that may not be readily available elsewhere.
Cheers.
To split water into hydrogen and oxygen, you need to add energy. It's very well possible that a catalyst can make the process more efficient than simple electrolysis, it can't change the fundamental fact that energy needs to be added for the reaction to occur. A catalyst will decrease the required activation energy, but not the total energy balance.
When you say that the catalyst itself must be 're-energized' or replaced, it sounds like the catalyst is the source of energy. Maybe that's not correct, but then the question remains: where does the energy come from?