Bit-banging a BASIC Birthday
thingswemake.com
thingswemake.com
For these reasons, and possibly also to hide their shame and embarrassment and make extra scratch on service calls, Tandy equipment often had one of those "Warranty void if seal is broken" stickers on it, which are now illegal to enforce even in the USA. They also used to seal the screwholes with Glyptal to prevent unauthorized tinkering; this so incensed my dad that he called all the way up the chain to the president of Tandy Corp. to make them stop (and also drilled through the Glyptal to get at the screws).
But when it worked, it was solid, not to mention cheap. Great stuff for hobbyists and even small businesses.
It was a bit of a bold move to base this on a Model I. That system had an unreliable expansion interface, limited memory options, and emitted a lot of EM interference.
I'm curious which model this was. The Model III was the first all-in-one model I had experience with, and the between the motherboard and the CRT neck was a piece of flat aluminum. The biggest danger was potentially snapping the neck off, but there was no danger of touching the mother board. Model 4 was the same configuration. Even the Model II had a metal plate between the CRT and any circuit boards.
I noticed that the video link on his web page was not a hyperlink. His video is here: https://www.youtube.com/shorts/JD9sXwgHMfc
I never owned a desktop TRS-80, but I repaired one once after a friend of mine inadvertently put 120VAC on the internal 5V power bus. About 1/3 of the chips were blown.
He told me how he blew it up: The Condor power supply he was using to provide +/- 12VDC needed for the RS-232 EIA voltages to drive his modem had the input (line voltage) present on a the same terminal strip with the +/- 12VDC output terminals. After a few beers, he had dropped some metal object (bottle opener?) and it momentarily bridged the 120VAC and one of the 12VDC outputs. The line voltage found its way through one of the 1488/1489 EIA converters, and onto the 5VDC bus. That was enough to let the "magic smoke" out of about a third of the chips.
https://en.wikipedia.org/wiki/Magic_smoke
I do still have a TRS-80 Model 100 in a closet somewhere.
[0]: https://blog.davidv.dev/posts/revamping-an-old-tv-as-a-gift
the repo linked in the article: https://github.com/joshsucher/mts-70
"a 48 K machine would have been a very unusually powerful one for 1978." After 1978, it was almost the standard.
s/heartiness/hardiness/
Josh seems to have a wonderful relationship with reasonably well-adjusted parents. Elsewhere in his blog he describes building not one but two models of his father’s law office, where Josh spent countless hours as a child. What a beautiful thing to be as accomplished as the people in Josh’s family and to be so nostalgic. Gave me shivers!