Hacker News Reader

Comment by metadat | Hacker News Reader

That's pretty crazy, thanks for sharing, Jeff.

Overclocking was my bread and butter as a [relatively] broke teenager in the late nineties, around the era of the first Athlon Thunderbirds, when you could take a 1GHz chip and [maybe] OC it to 1.5Ghz. It was a great time to be alive, and yet this is the first case I've heard of where LN2 would not give you a dramatically better result 99.99%+ of the time! I still miss HardOCP and Kyle Bennett and his team's reviews.

That one t-bird with char spots... It still worked reliably somehow, I might even have it in a box somewhere. Those swirly finned CPU coolers were shit! I came home every day after school and volted/burned the hell out of that poor chip, not realizing what I was doing.. lol.

View on HN

> I still miss HardOCP and Kyle Bennett and his team's reviews.

Kyle stil posts on Hardforum, and much of the team went on to https://www.thefpsreview.com/ but it's not really the same, because there's no 50% overclocking by just moving a jumper. CPUs and GPUs get factory overclocking that's probably within 10% of what you can get with reasonable efforts.

If it comes like that from the factory, is it overclocking? Isn't it just clocking?

potato, overpotato

We live in the age of dynamic clocks where modern performance-oriented CPUs try to optimize both performance and power efficiency at all times, so for the vast majority of users, it's both a lot faster and a lot more efficient to do things this way, while enthusiast parts still allow a lot of manual control to squeeze out the last few percent. I've had really good luck in my past few builds just getting very high-spec RAM and running XMP / DOCP profiles with a small FSB OC and letting the multipliers do the rest.

I still remember my dual celeron 450 clocked to 900 mhz. Those chips ran rock solid at double their rated clock, no didling the voltage or anything. Just needed decent cooling. Never mind that at the time having 2 processors was nearly useless.

Heh, back in those days decent cooling was a lot easier than now (for overclocking, at least).

That's one nice thing working on these little mobile chips—I don't need a $300 cooler, I can use a cheap little water block, or a small peltier element that doesn't cost much at all... and it's not being a space heater for the room. It's only pulling maybe 10-20W max.

Where are these "cheap" water blocks you speak of? Haha, I've never encountered such a thing.

Except maybe the $100 Corsair liquid coolers, but c'mon, they aren't real water cooling

I still remember that time, when you actually waited for the low end chip to be released and get it as fast as the earlier released flagships. Was a different time. But I also roughly remember having a dual socket board at the time with two overclocked celerons if my mind does not fool me. Funnily my wife is still using this 25 year old PC case, in which I glued bitumen for sound damping, for her current ryzen based PC.

Haha, yes, back in the 90s I had a dual Gigabyte motherboard and two 300Mhz Celerons overclocked to 450. Helped a lot with 3d animation and video rendering, but not much else!

I have overclocked a 1433MHz Athlon 1700+ (TBred/B IIRC) to 2200 MHz (3200+ levels) with an AN7-Ultra.

The secret sauce was running it at 200x11, with 1T capable RAMs, and that thing was snappier than "bog standard" 3200+ systems a considerable amount.

Without much of a voltage bump, and a good cooling solution, it ran within its thermal design without noise, and with rock solid stability. That system lived more than 15 years IIRC.

My favorite OCs were a $250 Black Friday special Celeron laptop that I pin-modded using a few-mm long piece of a single strand of stranded cat5 to go from (IIRC) 1.5Ghz to 2.0Ghz by just shorting two pins on the socket under the CPU, and a 4.6ghz (3.3-3.7ghz stock) Sandy Bridge i5-2500k that was rock-solid on air cooling with a comically large (especially at the time) tower cooler. That latter desktop ran the heck out of Team Fortress 2 (which I still play at least once a week with one of the last remaining community servers, End of the Line Gaming) for many many years.

i had a 1.4ghz Duron i ran stably at 2.45ghz, amazing value

Reply on news.ycombinator.com