Hacker News Reader

Comment by j45 | Hacker News Reader

I believe there is a setting for that.

Using an external receiver can help too.

External bluetooth transmitters/receivers are also the cure for shitty PC bluetooth stacks.

They don't switch to garbage quality mode every time an app, website, or game queries the microphone. They don't re-enable shitty defaults every software update. They don't require text config files in linux and the critical settings in those files don't get ignored due to open source politics. They don't mess up pairing every time you reboot into a different OS. They just work. $50 will banish all your bluetooth troubles to the deepest pits of the underworld, where they belong.

I should have been more clear. An audio/video receiver.

Beyond Bluetooth optical audio is quietly pretty decent.

Yes, TOSLINK is a godsend. It's immune to ground loops and motherboard manufacturers that don't give a shit, which is all of them, even ones that brand around having decent audio (ProArt I'm looking at you).

I have a different Asus motherboard and the audio hardware is on an apparently flaky USB bus (the motherboard has several, as they do). Even with an optical connection, the audio drops out sometimes. It was maddening to me when I first got the computer, because things like this are usually "not all the CPU pins connected to the motherboard" or "you know that RAM you bought on Amazon? yeah, it doesn't remember what you store in it! savings!". But... not this time. (I can pretty much kill USB on this machine by plugging in a bunch of unused USB cables; plugged into the computer, but nothing on the other end.)

I use an external DAC and I've learned which buses break USB when looked at the wrong way. But ... of course the on-board audio is just a USB device. Can't waste a PCIe lane on that!

This is for input but my lav mic is really quiet and has a pretty high noise floor and ground loop (not too bad tho) using the motherboard's 3.5mm port. Bought a USB sound "card" for 5.99 on Amazon a year back, it’s not even close. It’s output is mediocre at best but I don’t use that.

I tried a BT emitter once (a few years ago) and the out-of-sync with the video was unbearable.

Are there models that are recommended? I have an old Samsung TV (ca 2010) and would love to add BT to pair my wireless headphones.

I use a 1Mii B03 connected to my PC through TOSLINK. It has a physical switch to toggle between low latency and high definition mode.

Ensuring the Bluetooth version is ip to date enough on both sides is essential

> an external receiver

Yes, passthrough digital audio to an AVR if at all possible.

Open TV. Find microphone. Apply tape.

Apply dollop of superglue, THEN tape for maximum quiet

Just gotta find a proprietary Samsung screwdriver first.

This should be what you're looking for: :)

https://www.milwaukeetool.com/Products/Hand-Tools/Hammers/48...

screw tape, cut it out. Any samsung TV with a microphone and an internet connection is probably sending everything it picks up to data brokers.

I don’t hate this solution one bit

Tape? My television does not need a microphone, if I identify one and open it up, there is no reason to leave it there.

Reply on news.ycombinator.com