Of course they _sell_ a headphone jack adapter. That's the point of removing it.
All the "weatherproofing" and "complexity" talk is just smoke.
All the "weatherproofing" and "complexity" talk is just smoke.
I got quite some corrosion on the headphone jack of my Raspberry Pi 2B. Not sure why. But either way, these adapters can be bought anywhere, and they'll work on other devices as well. Like I said, I didn't use mine much. Usually Bluetooth with an adequate profile is good enough. I doubt people hear the difference between Bluetooth adequate profile and 3.5 mm in a double blind test.
If you're trying to differente yourself from Apple, it seems like a no brainer to include a jack especially since USB ports are needed for charging, battery case accessories, data transfer etc. all of which can't be done while listening to music.
On top of that, a "wobbly" USB port is like the top issue with phones outside of a cracked screen and an analog port is way more resilient to always being plugged in while in your pocket than any USB adapter ever will be.
My wired headset is going to outlive whatever bluetooth sealed-in battery garbage "works today until it doesn't" too so "environmentally friendly" needs an asterisk.
This is Fairphone playing copy apple. You can like Fairphone and their mission, but giving them a pass here is just playing into marketing bs.
Batteries in some Bluetooth headsets can be replaced. There are iFixit guides available.
Most customers use terrible quality SD cards, and then QQ about them breaking. A burden for CS.
The exterior case design of FP4 and FP5 copies Samsung rather than Apple.
Every major vendor's earbuds and most of their headsets aren't battery-replacable. This complexity moves outside the phone and onto the user when all of this was handled reliably by "lesser" hardware of yore. None of this makes Bluetooth headsets an impossibility.
SD Card upsells are so obviously upsells, come on. Yes using shoddy peripherals can lead to a bad experience and they're replaceable for a reason. You seem to be going out of your way to bias the corporate position. Using low quality batteries risks far more, should Fairphone epoxy their batteries in to save the customer from that too?
Killing of the aux port was an Apple signature move. Whether or not the case looks like Samsung is not the true legacy of this courageous stance.
This just seems very evasive.
Doubt it, there is no data to support this with regards to Fairphone 4 and 5. You'd think that if there was a negative data point on that, there'd be tons and tons of CS reports on it. On the contrary; Fairphone 4 has very little CS support requirement and returns. In contrast to other phones, as well as Fairphone 2 (which was, by Fairphone's own [paraphrased] words, a CS disaster).
Either way, the USB-C port on Fairphone 4 and 5 is easily replaced.
> SD Card upsells are so obviously upsells, come on. Yes using shoddy peripherals can lead to a bad experience and they're replaceable for a reason.
eMMC is more reliable. Practically everyone is using these consumer grade (micro)SD cards. You get what you pay for.
> Every major vendor's earbuds and most of their headsets aren't battery-replacable.
Oh that is weird cause this guide is marked as Easy and a major brand [1]
[1] https://www.ifixit.com/Guide/Sony+WF-1000XM3+Battery+Replace...
It's not surprising that if you make using my old headset difficult, I and millions of others will move to buying a wireless alternative — they're counting on it. That's what happened and the sales numbers mirror that. People throw away way more audio equipment today than they ever have.
The fact that these Sony earbuds happen to be replaceable is quite a bit different than them being _designed_ as user-replicable. You found a community member that uploaded a video showing you how to do it, now show me the manufacturer's documentation explaining how it's done.
This exists for watches and cameras, but we have been lulled into throwing battery operated things away as a cultural migration pattern and Fairphone is aware and complicit in this indirectly and unnecessarily.
I get it, you either work for or just really dig Fairphone. Glad you found a company you like so much.
Hehe, well there's converters which add Bluetooth to devices like keyboards. Surely you can get one to work on your 3.5 mm device so you're up to par? /runs
Honestly, I've been a 3.5 mm user for a lot of years in my life, and I actually love listening to my little WF-1000XM3. In fact, they're more safe to wear before I fall asleep. Because I won't be able to suffocate due to wires. Also, back in those days where I often used 3.5 mm cables I often had cable breakage at the choke points (point of entry and near the speakers). I used to burn through a couple of headsets a year as kid! I'm not missing that at all. But cool enough, Fairphone actually had a 3.5 mm headphones where you could detach the cable to replace it. And a third example: with ambient sound I can do stuff like dishes, open front door, or make up my bed without using a wire and without being attached to anything.
Do you know about VR by chance? Do people like being connected with VR, or do they prefer to be not connected? The latter ehhh..? Cause it is more convenient, that is why.
> The fact that these Sony earbuds happen to be replaceable is quite a bit different than them being _designed_ as user-replicable. You found a community member that uploaded a video showing you how to do it, now show me the manufacturer's documentation explaining how it's done.
I don't give a shit what Sony's take on it is. iFixit guide is enough for me.
> This exists for watches and cameras
Both of which are type of device which is now redundant.
> I get it, you either work for or just really dig Fairphone. Glad you found a company you like so much.
shrug and you're on the of them 3.5 mm loudmouths? :)
Planned obsolescence is baked into the marketing strategy. Fairphone realizes this but capitulated to sell peripherals, toeing Apple's talking points.
Companies taking a principled stance on repair is how repairs actually get done not the random customer finding an out-of-band way to increase the longevity of their hardware by trawling iFix it.
Samsung was able to pull this off with the S5 A DECADE AGO:
- removable back
- removable battery
- headphone jack
- SD card slot
- IP67 water resistant
This is an anti-environment moneygrab plain and simple. They omit the headphone jack so that they sell you the solution, which just so happens to be their brand of wireless headphones, dongle, whatever... if you actually like FairPhone you'd criticize them over this bullocks instead of being an uncritical parrot.
I would prefer two USB-C over one USB-C plus one 3.5mm. It would be more useful to a lot of customers.
I don't think you get it. The reason why there isn't any space for 3.5mm now is because they didn't want to add it, they could add the space if they so choose. This is not a problem you should think about, it should be the designer/engineer/etc's concern to figure out how to fit it in.
It is normal for there to not be any space in portable electronics, that just means they've utilized all the space they had optimally; it doesn't mean they can't add more features and redesign it to accommodate the jack.
The S8 I had was the low point of Android ownership for me.
My personal use case for the headphone jack is playing music in my car. My car doesn't even have an aux input (I have to use a cassette adapter), let alone Bluetooth. And when I'm on a long drive, being able to play music while charging is a must. I will only very rarely hook up a pair of wired earbuds to my phone, but I absolutely must have a headphone jack.
I wish I had the same problem as you do with your car. Mine is old enough that it doesn't have Bluetooth (I'm not the first owner and Bluetooth was an "extra" in this model) but new enough that there is no cassette player (and no built-in aux input) :)