The current in all three potentiometer terminals is limited to 25 mA. The terminal with the maximum current is not the wiper, but the end terminal which carries both the wiper current and the end-to-end current. So the part needs to handle 15 mA, not 10 mA.
It is also good to calculate the power dissipated by the potentiometer. By inspection, the Thévenin equivalent circuit of the indicator is a 12 v supply in series with (1800/2+300) = 1200 ohms. The maximum power transfer with occur when the potentiometer is also presenting 1200 ohms. This is not at either end of travel!
Going through the algebra it looks like 1200 ohms (greatest dissipation) happens at 40% of the potentiometer's travel. It's still only 124 mW, so this part is well within its 1 W absmax.