DJI Drone Flies over the Top of Mount Everest
dronexl.co
dronexl.co
Is there a viable alternative for EU customers that are sensible about the geopolitical aspects of this?
I also looked at some open source firmware, but didn't find anything particularly appealing. e.g. [0]
That won't be a Mavic, but that's european, and really not bad.
Open source would be PX4, Ardupilot and BetaFlight, pretty much. But there you need to build your own frame.
https://parrotpilots.com/threads/parrot-anafi-is-made-in-chi...
People here care if it's a Chinese company or not.
It's like a reverse "what if China invades Taiwan and takes TSMC".
https://www.seafarerfunds.com/prevailing-winds/party-committ...
https://www.nytimes.com/2019/04/25/technology/who-owns-huawe...
All the parts are going to come from there anyway...
Collecting photo and video footage combined with GPS data without the explicit consent of the owner would be the biggest one, IMO. That would be a great way to build maps of areas that aren't visible from satellites, or to get more detailed imagery than a satellite, or to build full 3D maps of areas using photogrammetry or similar.
Just the GPS data could also be very useful, as it would be a map of the space that drones are likely to be able to fly through. If someone has a 3D map of areas where consumers successfully flew drones, seems like that would make it much easier to send semi- or fully-autonomous drones through there too, if the area were of interest. The US Navy has a problem with mystery drones surveilling their ships, so it seems reasonable to assume that folks are doing the same with sensitive facilities on land. Maybe it would even be useful for plotting flight routes for cruise missiles, so they can stay as close to the ground as possible?
Capturing wifi access point information, like some mapping companies have done, could be beneficial to an organization that doesn't have traditional mapping vehicles. Same for any other radio signals that the device can pick up.
All of that is more or less passive, with the exception of sending the data somewhere. There are a lot more options if the manufacturer is willing to be more aggressive and risk someone noticing that their products are behaving oddly.
And it could also ask for photos near locations where Chinese dissidents or their family members live.
1) drone is flying in Ukraine?
2) motor amperage is higher than normal (probably carrying a grenade)?
If 1 and 2, return to takeoff point and drop the grenade
Not that I could trust an US or EU product to be less invasive of users privacy; if we don't want products that phone home we must make them by ourselves. Not an easy task, however, especially wrt undocumented chipsets running tight closed firmware.
Does that mean they can run the metadata through machine learning and save all the video their filter decides is interesting?
That sounds like it has geopolitical aspects whether they're doing it right now or not.
Instead, putting that same money into a corporation from a place where privacy is valued and there isn't a direct benefit to the state is best in my opinion. All of these little micro-choices add up in the long run.
I think, if you value personal freedom and rule of law instead of rule by law, you need to stop funneling money into the Chinese economy.
Surely a company in Taiwan could be competitive in this space?
[1]https://taskandpurpose.com/news/marine-corps-long-range-unma...
I'm of the opinion technology can move too fast, and giving money to DJI is fuelling that fire.
I don't own one, just a fun little DJI Mini 2, but it's only a matter of time.
The US isn't the EU, but I have negative trust in DJI (that is, I assume they're doing dastardly things with their huge firehose of data) and figure Skydio has a reputation to maintain if they want to differentiate, so neutral and even slightly positive.
I hope Skydio learns from Apple that privacy is something consumers who don't want the cheapest Chinese model of something demand, and does a better and more consistent job of delivering it.
I had been searching for it on YouTube thinking it was a DJI video, I’m fairly sure it was, hence me not finding it.
Does any company make an indoor capable drone that can fly a fixed path (through a house). It does not really matter how fast it is, and it does not need to be a strong drone.
"All" I want is to walk through a house with a drone, capturing the video and then have it repeat the same path over and over again autonomously. I don't even care about obstacle avoidance beyond the most basic "stop if you can't move to the next point"
Ring Always Home Cam | Flying indoor cam with multiple perspectives, custom flight paths, and In-Flight Live View
I would buy the version of that drone which doesn't immediately make me think of Ubik, though.
The market is huge and bewildering and I don't put a lot of time into keeping up, though. If there's not something in this niche, there will be.
The reasons why I would like something like the Avata are:
* I want something that does not rely on Wifi but has their own transmission system (DJI is really top of the market here) because it should fly around a two story house where I can't guarantee coverage
* and I don't want to deal with switching networks (the goal will be switching between multiple houses and flying the route recorded for that specific house)
* and a better camera (the Tello is a toy camera). I would go for adding a naked GoPro but that's a hack
* and if all stars align, something that has indoor path following already built in
edit: Ohh, you work for skydio, I should've guessed. I wish you and your team a successful spam campaign.
There's no need to be nasty. They were just asking if you thought copying the market leader was a good idea. Personally I'd pay more for the Made in the USA product if it has the features I need (not necessarily the "most" features)
This also means anyone can use the SDK DJI created to run their own drones. If I get a lot of time I might be tempted, though my drone will probably die to my code..
https://foreignpolicy.com/2018/03/29/the-disappeared-china-r...
So if you were one of these people and some jamoke was flying one of these drones around your area I'd imagine that would have a profoundly negative effect on your psyche. Which is one of the reasons I'd never fly a DJI drone. I'd expect there's a potential that the drone is feeding back track and positioning data w\ imagery to a "service".
For example, I have Huawei headphones, but did not download their app. Even with bad intent, there should be no way they can 'phone home' over regular BLE, through my device's default audio drivers.
Same for a password app that doesn't have internet access allowed or a WiFi device that's on a closed network (only works if they don't need cloud to function of course).
Perhaps this kind of isolation is not possible for a DJI, maybe because they have 3G or (need) WiFi on board or in the app that's connected to the world? The further away this need is from the core usage, the easier it may be to 'block' or replace it with something 'Western'.
There's tons of great open source flight controller software out there - ardupilot, inav, betaflight, etc. I'm wondering what you didn't find particularly appealing about them?
If I were a Ukrainian DJI pilot I'd be worried about China doing Russia a favor by releasing a firmware update with this logic:
1) drone is flying in Ukraine?
2) motor amperage is higher than normal (probably carrying a grenade)?
If 1 and 2, just return to takeoff point and drop the grenade
I have waded into the drone space recently. I had my eye on them (specifically DJI; they're clearly the leader) for a while (hobby photographer; lover of tech toys), but every time I looked in the past they were too expensive for me to justify. My uncle had one that as $1200 or so, and then a friend had one at like $600, and then just before we were going on vacation to Scotland I looked again and -- HOLY CRAP -- there's a model at $299.
Sold.
It's the DJI Mini SE, and you DO give up some stuff vs. the next level (about $500), but most of it is the drop from 4K video to "merely" HD. (There's also reduced range, which might end up mattering more.) OTOH $299 is for me a point where, if I fuck it up, I can be sanguine about it.
It's INSANELY easy and fun to use. I got comfortable enough to send it far out over lochs, and to learn to trust its "return to home" function when flying in places where line of sight might obstruct the signal. If you haven't played with one you probably wonder how it handles losing a solid connection with the operator, and the answer is that, at least at this level, it remembers where it launched from, heads to a previously-set height (to avoid obstacles) and then comes home. At some point en route it'll re-acquire a connection and you can take back over.
(Higher-end models (like the one they took to Everest) are able to navigate around obstacles and fly a more complex path home, but hey, this is the $299 model.)
I'm happy to share the video I shot but not publicly here. PM me (is that a thing?) if you want a link. And if you plan to travel somewhere beautiful where drone flight isn't severely restricted, I strongly suggest you consider getting one, China or not.
It's from Litchi:
(Obvious exaggeration, but there is a trend to hyper-compression of content)
Are drone rescue-assist stories collected somewhere? I dreamed about this kind of thing all the time as a kid and now that it's actually happening I want the details!
Congrats to DJI.
They are being used in the Ukraine/Russia conflict atm by each side for spotting and dropping grenades and mortar shells. They are doing it by rigging them up with cheap aftermarket parts and then rigging the AUX light on/off to trigger the drop.
They are also being used in other conflicts in Syria, Yemen, and Myanmar.
They quite literally have changed warfare because they are so affordable.
Really interesting overall. Will be interesting to see this all morphs into.
Allegedly at Pearl Harbour 63 American civilians were killed by anti-aircraft shells falling on them and 34 wounded.
It takes a lot less than that to blind everyone in the crowd with shrapnel or kill them, if you’re trying to shoot down the drone flying 20 ft over their heads.
The smaller the kill radius, the more difficult the intercept (fundamentally) - and that’s assuming there is a safe backdrop for any non-exploded shells.
These scenarios are much different than point defense at sea of a warship, or defense of the skies over a military base or city surrounded by mostly empty desert.
Similar to small grade concussives, I've heard some interesting defense systems use a projectile that has a kind of "mini parachute" to overwhelm target acquisition systems. I can't recall what it was in relation to. Chaff, maybe? The point is, if you could get enough small objects floating in the area, you could make it much harder for an enemy drone to maneuver within a specific area.
Honestly, I think the soon-to-be hurdle would be around implementing a good jamming system against automated defenses, which would probably lead to inventing some sort of miniaturized version of current fighter planes, but built in such a way that doesn't need to account for things like G tolerance for pilots.
Drones that can carry a couple pounds or more of C4 (which is a lot) can fly literally 10 ft above roof tops and crowds at 100+ mph while zig zagging through buildings and alleyways - fully autonomously.
This isn’t theory, there are live demonstrations on YouTube.
>> zig zagging through buildings and alleyways - fully autonomously
Also never been done
The alleyways are a simpler version [https://amp.france24.com/en/live-news/20220504-drone-swarms-...]
Here is a YouTube video of a demonstration with a hexcopter capable of carrying 10+ lbs. [https://youtu.be/ODQT_hQsQgc]
And here is a dude flying a DJI Inspire (not the same as above) carrying 5 lbs. [https://youtu.be/DKr-yj68VJs]
Folks have been using those and similar (cheaper) drones to drop Grenades on tanks in Ukraine.
As the autonomous flight is harder with smaller drones (less computing payload available, worse sensors), the only reason you’re not seeing both of these parts together in urban environment is the implication (for national security). It is there.
At speeds of up to 40kmh, the claim was 100mph+
>> The alleyways are a simpler version
Here's the video of that https://www.youtube.com/watch?v=Lr7L2t-svJQ&t=16s - that's below 5mph and carrying an external payload of 0 grams, and the reason it's in a forest is because you can't fit them all in an alleyway and you need multiple in order for them to work.
>> Here is a YouTube video of a demonstration with a hexcopter
At 22mph, the claim was 100mph+
>> And here is a dude flying a DJI Inspire
At around 20 mph max but mostly hovering and for 8 minutes at that before running out of juice
>> Folks have been using those
No. People like yourself can easily dream this concept. It stands to reason, why wouldn't it be possible? The truth is that battery technology is no where near good enough yet.
It's the first idea tried in Syria, it's been tried thousands of times at this point and yet we have more documented cases of the aggressors killing or injuring themselves than of the 3 documented cases where this actually worked in practice - all 3 of which i think everyone can agree from the footage are pure fluke. Zero aiming was possible, it was just release and hope for the best in all 3 cases.
What people are actually using them for is for recon and aiming of artillery. They're effective in these roles and that's why they're used for this rather than strapping heavy explosives to them.
>> autonomous flight is harder with smaller drones (less computing payload available
That's not true. Compute isn't a restriction in small drone autonomy. A basic F4 is wayyyyy overkill for flight stability and control. Waypoint navigation is even lower power requirements since it amounts to a simple loop not much more complex than:
1. Get current GPS coordinates
2. Get current compass heading
3. Send directional input via serial peripheral to F3 or F4 flight controller
4. Repeat
In larger aircraft it's harder because you can't beat physics, in a small drone i can change the amount of torque applied to a propeller 4+ times per rotation in toy off the shelf drone tech today. With larger craft that have non-electric motors this is simply not possible. You can't instruct a mechanical engine to regulate its power output with the same fidelity of an electric motor.
>> worse sensors
The only required input sensor is a gyro - in practice we use accelerometers and GPS in autonomous drones but there are ways of avoiding the need for these (e.g. visual inputs / optical flow as a correction for drift). MEMS gyros are cheap and effective, what better sensors do you need?
Your reasoning is uninformed / dreamed up based on watching too many movies and not being familiar with the actual discipline.
Better algorithms are a restriction. The science / theory part of implementation was achieved by all projects fairly quickly (ardupilot, clean/betaflight, etc. etc.) - but the art part, the how it feels and performs in practice, is an unsolved problem under continual development.
>> drop Grenades
Too heavy given current battery technology and lack of aiming. These are not effective weapons which is why they have limited success. More people have been killed in war zones in the past decade by garden spades than toy / photo drones with explosives.
TL;DR until batteries technology moves forward by a few generations, the concept of a small drone as an offensive weapon will not be better than that offered by something like the switchblade drone. Which when you cut through the excitment, is less valuable than conventional weaponry in most fight scenarios.
Compute is not a limiting factor in a small drone for basic flight operations, it is a limiting factor for real-time optical guidance (aka in GPS denied areas and real-time object/target recognition). Which is exactly what I was referring to.
Those examples yes are not showing 100mph. I’m afraid the video I’m referring to has been pulled, and the in-person demonstrations I’ve been asked to not talk about or publicize (now that I follow up with the parties involved).
The battery technology is more than sufficient for what I’m describing. My M300RTK has no issues carrying 5+ lbs for 15 minutes or 1-2 lbs for 40 minutes, which is more than sufficient, and scale is more than adequate here.
You’re a couple years behind on this assessment. I literally have a 10 lb ‘hunter killer’ autonomous anti-drone drone from a company I’m not going to name sitting a few desks away from me right now.
Interesting.
Let's take a second to take this from back of a fag packet physics.
To produce a 100mph drone is easy - lets take one of mine (there's nothing special about it) as a starting point and then lets see what we can change to achieve load carrying while retaining this speed.
Each motor & prop combo produces 1.5kg of thrust. They do this while drawing 40amps each from a 6s - which they can sustain for up to around 10 seconds before burning out MOSFETs on the ESCs (not to mention deforming the battery plug due to 160amps passing through a 60amp connector). This craft has a weight of just under 350 grams and when coupled with an 1800mah 6s, has an all up weight just under 650 grams.
We want to carry "several pounds" - lets make it easy, lets say 2lbs - and retain that 100mph speed.
Adding 10 grams prevents us hitting 100mph, we need to scale up our thrust. First problem - there's no other prop pitch or blade count for this motor size which will increase thrust while retaining prop speed, so we need to move up a size in motor. Since we need to carry 2lbs, you might think we only need each motor / prop combo to produce at an extra 0.5lbs but in practice we're going to need more than this because we need to sustain the aircraft vertically, whilst also providing enough thrust horizontally to reach the target speed, so in practice we will need more than an extra 8lbs of thrust (remember how 6kgs of thrust is needed to carry a 650g craft to 100mph - you don't just get to add 2lbs of thrust and call it done).
Problem - we need a motor / prop combo that produces above 2.5kg thrust each - so we're into 14 inch propellers and we need a motor heavy enough to take around 60amps at 6s (i'm being conservative to try and make the maths work out in your favour but i hope we can both agree that only 60amps is pure fantasy here).
That's a new problem, our weight went up and so we need even more thrust to compensate.
That's another new problem, we have more thrust but now we need a power supply capable of a higher discharge rate - that kind of battery entails even more weight.
But now there's a new problem, our larger props mean we're well away from the happy 300-400mph tip speed and now we're approaching the speed of sound - which of course means we can't fly.
But now there's a new problem, the battery that can supply that discharge does exist, the only problem is it weighs almost 2kg by itself.
And so we're back to you can't fly 2lbs payload at 100mph on today's battery tech.
Camera operators have been trying hard for years at this point to put a RED or some other expensive heavy camera / lens combo right next to race cars on track. There are two solutions for that today: 1 - fly the heavy lens and get that sweet image but do it at 20mph or 2 - keep up with the 100mph+ action but film it on a gopro or similar.
Some random babble:
I'm glad you're running 6S at least. I was worried you were running something like a 2S rig.
Is your your assertion is no one can build a quadcopter style drone that can go 100mph and carrying a 2lb payload?
Or that you can't add 2lbs to your 6 inch racing style quad and go 100mph without changing something design wise?
Because the first has a number of commercial products (albeit using hybrid powertrains due to longer desired range [https://soninhybrid.com/], [https://dronedj.com/2022/01/04/firefly-really-heavy-lift-dro...]). They'd have no issues doing the same thing over shorter distance, but folks wouldn't buy them - because for the commercial use cases, speed is only useful when it means covering more distance (and is therefore is really speed + distance). Tweaking some variables and changing some thinking would get you something from DJI that would have no issues, but it wouldn't sell, at least to the typical commercial or recreational market.
I would be VERY surprised if DJI didn't already have a healthy set of military contracts for doing exactly this, but if so, it isn't anything public.
The second yeah, should hopefully be obvious. It isn't THAT far off though, as you'll see below.
For the situation I'm mentioning, there are different tradeoffs, and I'm doing the best I can without causing problems re: confidential details:
You're getting confused on amperage, because peak amperage output is a matter of parallelizing batteries and design of the cell, and is NOT battery chemistry limitations (per-se). You can double your peak available amperage by changing the way your battery is wired. It doesn't add weight. It does halve capacity however, but that is range, not peak power.
Thermal management is one of the bigger issues in practice, and higher voltages tend to help a lot there (less resistance in wiring for a given amount of power delivered). It also results in less weight.
If you had a 40 amp peak 6S pack (which is only ~ 800 watts peak), you'd get the same per-pack equivalent draw with 3x in parallel (120amp total is 40 amp per pack) or 2.6kw. But frankly, 12S (or higher voltage) is better in every way but expense/parts availability if you're handy with electronics. A 12S 40A pack delivers 3x the actual power for the same wiring, assuming components are insulated/rated for the voltage.
And yeah, I know 'peak amps' numbers on most batteries are a lie, first thing I do when I do a build is instrument power flow, including amperage under load.
ESCs/motor controllers would likely be your primary sourcing difficulty, but you can get COTS 120 Amp individual motor ESCs [https://www.getfpv.com/electronics/electronic-speed-controll...] inexpensively if you're running 6S, and not too crazy expensive if you're running 12S like that particular one is designed for. That one also already has BLHeli_32, but most of them can be re-flashed, and then every COTS flight controller can deal with them pretty easily. That particular ESC is rated for controlling 32kw PER MOTOR, by the way. You could use a 4 in 1, but as you note, meh on total power rating. They are compact. They also have thermal management issues. Individual ESCs can get out into the airstream easier, and if you fry one it's less work to replace.
Motors with the desired design criteria would be next, sourcing difficulty wise, but that would depend on specific propeller/fan design. There are a LOT of options, and winding your own actually isn't THAT hard (or re-winding a COTS one for different characteristics).
Most likely anyone who is doing what I describe at a state actor level is going to be doing their own ESC design, and ESC + flight control firmware anyway, and the electronics to make a compact ESC for arbitrary amperage/voltages are very well understood. They're used in everything from elevator motors, to milling machines, to handtools. If it's someone doing a military style contract, they'll of course do their own battery packs, nominally to maximize their performance envelope for whatever mission they're trying to get the gov't to cough up cash for, but also because COTS will make them look less awesome.
But it's easy to rewire COTS packs to do pretty much whatever you want tradeoff wise, re: voltage, amperage, etc. Lithium batteries are amazing for their ability to handle very high peak power draw, and in the scenario that I'm describing, the bottleneck would likely be thermals, not chemistry or weight, and considering the time window being discussed, there are lightweight and interesting ways of handling that.
100 mph == 1.6 miles per minute after all, and it's highly unlikely the drone would be anything but hot gas and rapidly disassembled small parts after that amount of time.
You're getting confused on props and tip speed, because you aren't thinking of, or aren't aware of, ducted fans which specifically solve this problem by giving you much higher thrust at the cost of a little (or a lot, depending on the frame design) extra weight. A little less than double, depending on conditions.
Prop pitch and design would look weird, comparatively, depending on the mission, from what you're used to seeing, and depending on the specific numbers, elements like blade count, leading and trailing edge, chord length, etc. tend to differ.
High agility has different airflow and stall characteristics than maximum speed and/or maximum weight and propellers designed for one tend to be not great for the other.
That said, there are a number of aerospace engineers quite familiar with the problem, and it's well solved at this point, up to ~ 160ish mph. And by well solved, I mean Embry-Riddle has it in their basic curricula, and there are a LOT of graduates rattling around. They're pretty smart too, in my experience, and are itching for problems like this to solve. Especially if you are ok with things exploding until they get it right.
After that it requires more complex solutions (usually involving a degree of direct jet propulsion) and some amount of fire.
Alright, I'm done. Anything more and I'm going to get in trouble.
They seem fixated on mass shootings and bombings. Also US has automatic weapons sonce forever but 50 years ago there were no mass shootings.
Fashion?
A common tactic in Syria for years is literally putting a couple lbs of explosives on a consumer drone and kamikaze’ng it into a target.
Where would the most predictable time be for going after an official? At a large event they are supposed to be at.
On that you are wrong.
https://en.wikipedia.org/wiki/1984_Rajneeshee_bioterror_atta...
It's not quite "drones HATE this one weird trick". Yes, jamming is a thing, but so are FHSS, ARMs and any number of other countermeasure-counters. No GPS/GNSS/whatever? Inertial navigation systems. No comms at all? All kinds of flavors of automation.
Simple countermeasures may be effective against consumer drones, but the overall problem is an iterative metagame where flawless countermeasures are pretty rare and there's usually a way to adapt or fight back.
Wouldn't that just take out the remote drone controller?
But of course ARMs work fine against a drone's controller, too - assuming it isn't using FHSS, though that itself assumes no crazy-advanced anti-FHSS RDF. That's kind of my point regarding how this stuff cuts both ways, how even if a countermeasure works in one instance that's no guarantee it'll continue working, and how countermeasures themselves generally have weaknesses.
Naval engineering provides a lot of examples of this dynamic. Check out what the introduction and development of the torpedo did to the meta.
Are you spending a $500,000 cruise missle to take out a $200 transmitter mounted to a tree? To allow your $20,000 drone to not get shot down?
What happens when you add 1,000 jammers?
It pretty quickly becomes not super effecient to deal with this.
That said - GPS jamming is the main RF attack that will stop sufficiently autonomous drones.
drones work because of their elegant control mechanisms. Those require a nice clean radio environment. I suspect, but I do not know, a big spark would mess with the video stream coming from the drone, and probably the real time controls going to the drone. So, like, an arc welder or Tesla coil sparking continuously would do unpleasant things to the drone - no remote control.
You could, of course, make the drone smarter, use AI to detect targets. but that would hurt performance, and make the drone more expensive. I'd point to Iran faking gps signals to ground the us drone, like a while ago.
It's a bunch of tradeoffs. Preprogrammed doesn't have versatility, but is cheap. Dynamic is versatile, but expensive. Remote control is vulnerable to other stuff.
[0] https://discuss.ardupilot.org/t/indoor-mission-plan-no-gps/7...
You can cover a lot of small errors with a bigger explosion. but that means more payload, and more expensive.
denying that elegant control of small explosive in a precise location seems like a winner. yeah, you can go to position X but maybe I'm a little to the left of that. of course it's not free, but me picking up my shit and moving 10 feet is pretty cheap. cheaper than a drone for sure.
Maybe it doesn't matter, maybe tensor flow says that's a person near the target, adjust location to drop the explosive on the person.
from the point of a know nothing observer, it sure seems like there is some wiggle room. I'm not convinced an inexpensive drone has the capacity to solve these problems. (but you could send like 36 and drop grenades in a 6x6 grid, but that seems expensive).
Screwing around with RF seems like step 1.
Also - if you do jamming - it makes you a big target broadcasting "I'm HERE!". There are missiles that are designed to guide themselves towards jamming/radar stations like HARM.
So with combined arms you can: - launch a decoy - watch for radar/air defence/jamming stations - launch HARM missiles to destroy them - launch drones to guide artillery - destroy undefended bases with cheap and accurate drone-adjusted artillery fire
Also - military drones are usually controlled differently from the civilians ones. It feels more like playing RTS (click on the target, wait for the drone to get there) instead of a flying simulator (control the engines constantly). So if you're jammed for 5 minutes while going from point A to point B - it doesn't matter.
Also military drones often use satellite communication which is much harder to disrupt than direct radio connection.
One option is radio antennas in a gun shaped thing. And it just scales up from there. You can use very powerful antennas on the ground or in a plane to interfere with the control system or GPS.
Same argument made against Israel's Iron Dome against Hamas's more or less crude rockets.
Said argument misses the point. The question isn't whether an Iron Dome missile is more expensive than a Hamas rocket (it is). It's whether an Iron Dome missile is more valuable than the lives and property lost by letting that Hamas rocket through.
I think the hunter drones would be first to get autonomous operations. The cost of errors/bugs is less for them than say for a ground attack drone hitting your own tank or unrelated civilian truck.
It's overkill for cheap drones, though. The missile costs more than the drone.
https://scindeks-clanci.ceon.rs/data/pdf/0042-8426/2017/0042...
Of course, this way is quite dangerous, and violates radio frequency regulations, but if it's a war, who cares.
For what it's worth, this attack can be sidestepped fairly easily just by not using open frequencies, to which microwave ovens are usually tuned(for regulatory reasons). This is only useful against drones that are available to buy for individuals, as they are forced to use the same open frequencies. Anything military grade is likely using other frequencies, and you can't use cheap microwave ovens to generate ridiculous amounts of them.
Plus there are multiple channels at 2.4Ghz, and you are probably outputting a narrow single freq.
But that's just me guessing, I'd love to know if it would actually work.
I too would really like to know, and try it too, but getting permission for 800W transmission would be a pain.
Good 802.11 radios can do 1000mW.
A microwave oven magnetron and a simple aluminum waveguide is many hundreds or thousands of times more effective radiated power.
Not only that, these parts are being crowd-sourced 3D-printed!
I feel like this implies that they're using DJI/consumer drones. They aren't, those are too expensive and too slow. They use custom-built FPV drones, which are much faster, cheaper, and much easier to build from parts.
The phrase "rigging them up with aftermarket parts" doesn't really apply when the entire drone is "cheap aftermarket parts".
DJI drones while expensive they are rather user friendly. Some fighters in Ukraine do use them with aftermarket droppers[1]. Payload is limited to a single VOG-17M grenade. Dropper has a light sensor and is triggered by aux light.
They also build custom drones as well. For example there's R18 by Aerorozvidka[2]. Which is largeish octacopter from higher quality hobby parts. Payload is ~5kg which allows taking multiple anti-armor grenades or small mortar rounds.
[1]: https://www.amazon.co.uk/Taoke-Airdrop-Delivery-Foldable-com...
And they are using aftermarket parts that you can order off Amazon for ~$10.
- https://old.reddit.com/r/CombatFootage/comments/wz9j4v/longe...
- https://old.reddit.com/r/CombatFootage/comments/ws554a/drone...
- https://old.reddit.com/r/CombatFootage/comments/wdzgt3/georg...
- https://old.reddit.com/r/CombatFootage/comments/wq5dc4/soldi...
- https://old.reddit.com/r/CombatFootage/comments/ui4vsc/dpr_s...
- https://twitter.com/Osinttechnical/status/155961302344626176...
- https://youtu.be/oOV6Yq-aZNk?t=53
etc etc. literally thousands of videos confirming this.
See: https://old.reddit.com/r/CombatFootage/search?q=dji&restrict...
For more videos
An Air Dropper for a Mavic Air 2 for $30 that uses the AUX light
https://www.amazon.com/Airdrop-Accessories-Delivery-Transpor...
https://steveblank.com/secret-history/
The idea of a personal drone has years of military drones as inspiration. We’re just “giving back” in the form of a COTS option.
> A surfer was pulled out to sea by a rip current and was stranded in the water. The sheriffs department used their drone to find him, and used the drones loudspeaker to tell him to swim farther out where a boat could reach him.
I would never have guessed...wow. Thanks!
The K2 story is on YouTube. It’s pretty interesting.
[1] https://www.rega.ch/en/our-missions/cutting-edge-technology/...
It is surprisingly difficult to use a drone effectively for that - it is much harder to spot someone from a drone's camera than you'd expect. It is often still faster to find the patients by foot, but it has helped in some cases. And when the patients have been found, the drone can help to scout the surrounding area to find the best route out.
So overall the drone has been some help, but it hasn't significantly affected the outcome of rescue operations in any case that I know of.
That being said, drone use in the field is extremely useful in many SAR situations, and is often managed by volunteers that go out with machines of varying quality. Some show up with a DJI-platform equipped with thermal and optical cameras, others with sub 250g fpv drones. In some environments, simply having the altitude offers an effective enough leverage to use drones in the cheaper end of the spectrum. Flight time matters a lot.
With respect to sensor types, having access to thermal information is invaluable in some cases, and in others completely useless. It ofc depends on the thermal difference between the object you are searching for and its surroundings. In all cases, it is very expensive relative to optical information.
Anyone with decent electronics knowledge can put together a drone kit for around 150 bucks. Building a thermal camera without shelling out a decent sum of cash, on the other hand..
A surprising amount of that ocean was searched in some way or other in the year following MH370's disappearance (https://en.wikipedia.org/wiki/Malaysia_Airlines_Flight_370#/...), but pieces of plane are still pretty small in comparison.
1. Was this sponsored by DJI, which they could potentially use for any of their promotional / advertising efforts?
2. Is there a raw version? I would think that there should be more shakiness or variability in the captured footage, given the high altitude and assumption that the air flow would easily disrupt the flight of the drone.
3. What period of the year was this taken? Usually you'd hear that Mt. Everest is always packed with mountaineers, and being able to get a shot with very few people on the mountain slopes is quite uncommon.
Side note: This is a spectacular feat - man and machine.
When you put these all together you find that you rarely have to stabilise footage in post.
The camera is mounted on one of the best gimbals available. The DJI drones also do an amazing job at being stable during windy conditions. And sure, there could be some additional video editing later, but probably marginal.
The vast majority of climbers ascend from the southeast route (from Nepal), with a smaller number ascending from the northeast (Tibetan) route. I can't tell for sure which direction the drone is flying in, but some clever piloting may have helped here.
And yeah I have no idea how they had nobody else in the shots.
Older drones like the GoPro Karma I'm flying definitely have issues there, but modern drones and gimbals are extremely smooth.
Plus Everest has strong wind shear and cold temps, both of which are extremely taxing on batteries.
That said, this guy flew his drone to 40,900 feet from the ground in the wintertime: https://www.youtube.com/watch?v=k6QL0VjqYgI&t=0s
> The flight took place on January 3, 2019, near the Strezhevoy city, Tomsk Region, RUSSIA. (Western Siberia). My goal was to overcome the record height for rotary-winged machines (According to Wikipedia: June 21, 1972, the French pilot Jean Bulet raised the Aérospatiale SA.315B Lama helicopter to a height of 12,442 meters), which was completely possible. My drone reached a height of 12,467 meters from ground level as measured by GPS and 12,925 meters from ground level as measured by a barometer, which is standard for aviation.
Americans know our country is shitty.
One of the top stories on hacker news RIGHT NOW is about how the life expectancy is plummeting because we’re all fat and addicted to something while being trapped in a shitty health care system.
Chinese get so goddamned butthurt and defensive it is like they are mentally ill battered wives defending their abuser.
I've been on the Internet many years and see a lot of people getting butthurt when they read about China excelling at things, and generally the Chinese themselves are next to non-existant, at least here on the Western side of the net.
Whataboutism is prima facie, irrefutable, unquestionable evidence of butthurtism.
The phenomenon is so prevalent that the phrase 伤害中国人民的感情 causes newspaper editors and online commenters to roll their eyes because if you publish an article about how heavy rain has caused flooding in a province somewhere a dozen state-controlled media outlets and ten thousand weibo posters will drone on about 中国人民的感情.
https://translate.google.com/?sl=auto&tl=en&text=伤害中国人民的感情&o...
https://www.theguardian.com/commentisfree/2017/sep/08/you-sh...
But I see what level you're taking this to: anyone who disagrees with the agenda is a Chinese or Russian spy.
Then again, it's not about China, it's about a country with a regime that gives zero transparency and seemingly gives little about privacy regulation, and which has brought forth at least one big electronics company that's being blocked from big parts of western markets for fear of information (in)security.
Now, all that might be up for debate by itself, but you can hardly blame people extrapolate from that.
Then they filmed the ski descent of K2 by Andrzej Bargiel, a stunning achievement considering the exertion under no-O2 and how brutal the terrain is. Most people coming down K2 can barely walk, and plenty die on descents due to this over-exertion. They kept using the drone for quick carrying of ie medicine to higher camps, scanning the route down for skiing etc. In most places, 1 small mistake in those difficult snow conditions would be fatal,and due to weight the extremely lightweight ski equipment used required very high skiing level.
Title makes it sounds like the drone flew itself up and over the summit from the base of the mountain, which is clearly not true.
DJI made the video, did they sponsor themselves? They don't even show the drone in the video so I don't know where you're seeing product placement.
actually I wonder what the ambient temp is up there compared to say the surface of mars
Also, propellers have to work harder with less air density. More work, more heat.
I want to see someone take off from base camp and land at the summit. Would love to see a more technical look at how they did this, what issues they ran into, etc. Really curious about batteries in the cold.
So the thrust produced by the propellers on the drone should be considerably lower at the same RPM, but they might spin a fair bit faster if the engine can handle it, which would compensate. I too would be interested to know how it works out in practice.
[1]: https://en.wikipedia.org/wiki/Aut%C3%B3dromo_Hermanos_Rodr%C...
Same volume of air pushed through the props, much lower density, and as you say, much higher RPM.
Smaller sponsoring budgets. Tweaking the drone a little is not the hard part, the hard part is walking up there and funding everything required to do so.
Hard to believe DJI would let them fly vanilla drone in conditions well outside specified range knowing if it failed they would lose whatever money it took to sponsor the ascent.
The top of mount Everest with a standard unmodified model? Skeptical.
It doesn't change that the mountain range is a holy place for the people of Nepal.
New LiDAR measurements are shaking up some of the heights and thus rankings of peaks in Colorado, which is sort of interesting in a more mundane way,
https://www.washingtonpost.com/nation/2019/06/06/mount-evere...
In general though drones qualify as ‘quite annoying’, in national parks - particularly in areas like peaks or base camps where others are present.
The worst I could possibly imagine happening is that later when the footage is released the authorities demand payment of a fine. And even if you were forced to or decided to pay the fine, that seems like it would be insignificant in light of climbing the worlds tallest mountain.
In other words, who cares?
https://forum.dji.com/thread-256590-1-1.html
There's a joke about red flags somewhere in there.
“DJI drones were sanctioned under US Commerce Department and US Treasury Department regulations in 2020 and 2021. It is now illegal for any person within the United States to: Purchase any goods or services directly from SZ DJI Technology Co. Export certain data to DJI's servers in China.”
See: Apple’s secret deal to fund Chinese technology development and how US customs ensures nobody but Apple can import even genuine Apple parts and merch.
DJI themselves have publicly blamed "the compatibility strategy between the DJI App and Google Play Store", without elaborating. There's been no mention of US sanctions from DJI or Google.
I want to hear about the Athletes and their story first and foremost.
Exactly how many times does DJI shove their brand name or their product name in our faces in this footage?
The Athletes themselves are mentioned practically as a footnote. And some not even by name but by social media handle. That's beyond icky, imo.
> And some not even by name but by social media handle.
That may be their preference.
Yes, you can die on Everest if you're unprepared, or unlucky. The same can happen in the Adirondacks.
I'm far more interested in the stories of folks like https://en.wikipedia.org/wiki/Nirmal_Purja than plain old Everest summiters, which has been conquered by folks from age 13 to 80, double amputees, and the blind. (Those folks, I'm interested in. Tech CEOs looking for a thrill? Nah.)
I count two times, the last time together with the name of the people doing the expedition + capture of the footage. How many times do you count?