Hacker News Reader

Comment by gesman | Hacker News Reader

Tip:

This portable secure travel router supports MullVad (and Azire-VPN) out of the box:

https://www.amazon.com/GL-iNet-GL-MT1300-Wireless-Pocket-Siz...

Just input your Mullvad account number and it will upload all WireGuard configurations for all MullVad servers worldwide automatically.

Perfect to use to connect to any unsecure Wi-Fi and drive all traffic via VPN in hotels, airports, coffee shops, etc...

View on HN

I'd pay a lot of money for an Ethernet device that sits between the jack and the router that would make a tunnel for me. Is that what this is for WiFi??

No need to pay good money, just replace your router with something more configurable with OpenWRT / OPNSense / Mikrotik and set it up so that all routing goes through the VPN

It sits between your router and your endpoints (computers, laptops).

It can connect directly via ethernet cable or broadcast it's own WiFi SSID's to which you can connect.

You configure it to always connect to VPN of your choice using OpenVPN or WireGuard protocols.

Then you may connect to this device SSID and your traffic always be routed via VPN connection. This is way better, secure and more reliable than "VPN software" or "VPN apps" solutions.

Not sure if i answered your question?

Good news, you need less than $250. Just buy a Protectli appliance, install OPNSense on it with the wireguard plugin. Setup Mullvad config and route all traffic through the tunnel. That's it!

I've been running a similar setup for a couple years now. It's been great.

Or spend less than $80 on GL.iNet GL-MT1300 travel router

or $90 on GL.iNet GL-AX1800 Wifi-6 router with MullVad support preconfigured.

Nothing to install, tweak or have hassles with.

Or around 50$ for a cheap mikrotik box, though it will struggle with full gigabit routing.

Reply on news.ycombinator.com