Hacker News Reader

Comment by password4321 | Hacker News Reader

Good luck getting a Raspberry Pi these days!

https://rpilocator.com, specifically https://twitter.com/rpilocator

https://news.ycombinator.com/item?id=31212413 (4 days ago)

Unless you want super lower power consumption, you're better off with an second hand ex-office micro computer like an Intel NUC or the various Dell/HP/Lenovo VESA mountable PCs.

Almost all of them have replaceable RAM and happily support an M2 and a 2.5" SSD if you want to RAID the storage, and you won't be relying on an SD card either.

~$100 USD will usually get you enough to run a bunch of VMs, not just a VPN.

Server the home (no affiliation) had a brief write up on some of them: https://www.servethehome.com/introducing-project-tinyminimic...

Don't ignore the advantages of buying a used laptop (e.g. a ThinkPad), either! Battery backup against power loss, super power efficient, keyboard and screen for when your networking or SSH config is screwed up...

Not going to put a battery powered device not made for 24/7 into a corner of my flat, to be running 24/7 and be forgotten about. I've seen one too many puffed up batteries in a laptop to risk that. Nope.

When networking isn't working, SBCs have serial consoles for that.

To be fair you can just take out the batteries and run it that way

Many Thinkpads are however limiting the CPU to 800 MHz without a battery.

That's very useful info for the future, thank you. Yet another infuriating decision by lenovo. I wonder what the reason could be.

These days power bricks are not external power sources anymore but merely charging devices.

CPU spikes can create power draws that could not be handled by power bricks as the system is designed as a whole, including a working battery to absorb such spikes, allowing for a downsized power brick (cheaper, simpler, smaller).

Gimping the CPU allows the machine to reliably operate in absence of battery, otherwise CPU spikes would result in power loss.

Also very useful info, now I'm way less infuriated. Thanks!

Which some ACPI tables on EC editing might fix.

EC editing is how the Fn keys of traditional keyboards from the xx20 series transplanted into the xx30 series are made to work

FWIW, ThinkPads support setting custom battery charge thresholds, which lowers the risk in this scenario. It also prolongs the battery life as the battery is not kept charged at 100% for extended periods of time.

Laptops, at least in my experience, don't turn themselves back on after a power cut so you have to pay attention to them. It was a pain for a CCTV server I had.

And if you care about power consumption, there are bunch of rockchip rk356x based SBC's with reasonable PCIe and SATA implementations popping up every other day, with 2-8GiB or RAM available for less than $100.

Can you recommend one or give hints on what you have to consider when shopping for a board like this? I mean, the thing about the Pi is that you know what you will get and what use cases are supported.

Get a RockPi 4. They've got good upstream Linux support, and are relatively feature packed + performant + cheap.

What about even cheaper as a $15 Zero 2 W replacement (Mostly linux & USB support)?

I use https://wiki.pine64.org/wiki/Quartz64 as a home wifi router, but there are many similar boards. You can search https://www.cnx-software.com/ for rk3566 or rk3568. There have been several announcements recently.

Linux 5.18 will have reasonably complete support for headless uses of quartz64-a. It's best to check https://elixir.bootlin.com/linux/latest/source/arch/arm64/bo... for whether the board is supported mainline, and how much of the hardware is enabled. Other than quartz64-a, and some bannana pi, it looks like not many others are supported, yet.

Early times.

ServeTheHome actually has a whole series of reviews: https://www.servethehome.com/tag/tinyminimicro/

Something with an i5-6500T ($100-$120 in an 8/256 config) is insane bang-for-the-buck relative to a Pi. Especially with the tendency of Pis to multiply.

I've been lazier - I've just been buying ~$120 "Minisforum" PC's (4 now, for various people I've set them up for). They work great, but their CPU performance compared to the i5-6500T leaves a lot to be desired (1000/1400 vs 1800/4800 single/multi). They still kick a Pi's butt, and they are x86 which makes lots of things easier.

My main hesitation with buying the used USFF has been the Intel Graphics generations - I don't know enough about it, but I do use my mini PC for Plex, and have a hard time comparing the integrated graphics, which is critical. These N4000 destroy the i5-3450 I have in my NAS. It was cheaper to buy an N4000 and put Plex on it over network access, than it was to completely upgrade my NAS to a new generation of hardware, and the newer QuickSync version can actually encode with Plex.

My understanding is that QSV transcoding stopped being trash with Skylake and newer, but I'm basing that off of this thread and use an i5-10400 for my own.

https://forums.serverbuilds.net/t/guide-hardware-transcoding...

My original "Pi for PiHole" replacement 5-6 years ago was a used AMD GX-415GA NUC-alike that I spent less than $40 on and half was for an SSD. I keep it around still because it cold boots incredibly fast and if there's anything you want to boot really fast, it's the thing running your DNS.

Yeah, it's kind of a bummer how many things are being designed just for Raspberry Pi usage. For instance, Klipper for 3d printers. Technically you can use it on a Linux system, but they don't officially support that or tell you how. They only support the Raspberry Pi.

Pi's were overpriced even before they became rare.

I'm a fan of odroid's if you want better value.

Aren't they pricey too though? Last time I checked they went for a similar price at half the memory

I bought my pi for $5 and it runs a fully functional VPN, DNS server and as blocker on my network. Can run some custom code on there to handle DHCP leases, etc.

Chip shortage made things tough but they’re still cheap when you can find one

> I bought my pi for $5...

How?

The licensed reseller that is linked on their homepage has prices starting at 43 dollars: https://www.cytron.io/c-raspberry-pi-4

Here in Latvia new Pi boards go for around 80-120 euros from what i can tell: https://www.salidzini.lv/cena?q=raspberry+pi+model+b&offset=... (this is a comparison site, on a page where actual Pi board start, not accessories)

Seems like you got a pretty sweet deal, if it would cost me around 16 times more.

He is more than likely talking about a Pi Zero or even a Pi Zero W (built in wifi). I have bought both before for $5 each also.

yes sorry, pi zero w. When the chip shortage wasn't a thing.

Amazon UK has the 400 (keyboard one) in stock as of writing

Reply on news.ycombinator.com