Show HN: Get the guitar chords from your Spotify playlists | Hacker News Reader

Show HN: Get the guitar chords from your Spotify playlists

spotifychords.luca.gg

104 pointslucaaa80 comments

Hello, I am the creator of the website. The main goal is not having to search on UltimateGuitar for the chords of the songs you want to play, but instead get a direct link to the song on UG. I made it because I was tired of checking my Spotify playlists for songs of which I didn't remember the title but I wanted to play and then go on UG and type the title in the search field. It's more of a "I'm lazy" tool than an actual tab website.

You would think getting the notes and converting them to chords, and tablature, would be one of those "exactly suited for neural nets" type of problem.

If you want the chords to "Here comes the sun," you can find dozens of hits, but try something slightly obscure and they are hard to come by. (People with great ears have no idea what I am talking about.)

I've worked on this problem for some time on a personal project, and I'm pretty convinced you can basically solve this problem without deep learning or AI techniques, and instead use non-negative matrix factorization[0] as a bank of note templates (from their spectrograms). I have a fairly well working proof of concept and the approach is supported by the literature.

[0]: https://en.wikipedia.org/wiki/Non-negative_matrix_factorizat...

_edit_

That said, you'd probably need something more hard-core for extraction from an actual track, so you're probably right.

This is the right approach for song recommendation too — try your approach there and see what happens. If you want help on the business side, reach out.

That is very kind of you to offer. I don't know if I'd be able to find the time to dedicate to having this function as an actual product though!

You're already leaps and bounds into a good partnership - realistic expectations. Consider it again when you get downtime, no rush over here, more fun.

Can you expand on what you mean by "song recommendations" in this context? Do you mean recommendations like "if you like X you might also like Y"?

Assuming the answer is "yes", I'm not sure if I follow the leap from "non-negative matrix factorization as a bank of note templates (from their spectrograms)" to "song recommendations".

Very loosely speaking my (not wholly uninformed) interpretation of the "note templates" bit is sorta analogous to DFFT analysis with frequency bins centered around the "regular" notes of the chromatic scale - i.e., the cells of the matrix represent signal strength for the frequencies that correspond to conventional western notes (e.g. integer-valued midi note numbers) or (in aggregated form) octave-independent pitch-classes rather than arbitrary frequencies (that might fall between two conventional notes). It's a very useful representation of the component frequencies that appear in conventional music but at the end of the day it's more or less "here are the notes (or pitch classes) active for this given beat".

That is, I can imagine the role this information - essentially the musical score itself, or at least the pitch-specific dimension of that score - could play in a song-recommendation engine, but I'm curious how/why that specific spectrogram-template-based representation is significant.

Are you suggesting that that specific representation could be applied to song recommendations in a way that similar polyphonic-pitch-per-beat information derived from some other algorithm (FFT analysis for a hypothetical example) could not?

Or maybe I've misinterpreted your comment entirely?

More likely, they mean using non-negative matrix factorization but with a bank of feature vectors instead of note templates. NNMF can be used in a wide variety of domains because it essentially encodes the problem of "this thing is a bit like this thing, a bit like this thing, and a bit like this other thing".

If instead of numbers representing intensity at different frequencies (as in the spectrograms), the numbers in each vector of the template bank represent other features (such as listener overlap with other artists/songs, or genre representation across multiple continuous "color" axes) then you can recommend music to a listener based on the similarity to songs in their library to those in the template bank.

Ack'd. That makes more sense. I guess I took the comment too literally.

As an amateur musician I see this as a missing holy grail killer app. I'd love to have it just to pull the chords out of some of my own old recordings that I can't figure out how to repeat.

If anyone knows of any apps (even prototypes) that can do this, please provide links.

I may have to blow the dust off of my prototype.

If you do, make sure to make it a Show HN to let us know!

There are various commercial offerings that do this, including Chordify and Capo.

Alternatively if you want a flexible free (GPLv2) option with source code, consider the Chordino plugin (http://www.isophonics.net/nnls-chroma, C++ code at https://github.com/c4dm/nnls-chroma) which you can run in Sonic Visualiser (https://www.sonicvisualiser.org/), or indeed in Audacity.

There is a reference describing the Chordino method in the page linked above, but roughly it's not too far from the description of the parent poster - a non-negative least-squares method produces a frame-by-frame semitone-scaled decomposition which is then matched against templates and turned into a chord sequence using a hidden Markov model. Some sort of intelligent smoothing like this is certainly needed, the raw template matching is not especially useful on its own.

This type of method is now routinely outperformed by neural networks (see e.g. these MIREX evaluation results from 2018 which compare Chordino with a few other academic methods https://www.music-ir.org/mirex/wiki/2018:Audio_Chord_Estimat...) but I would suggest that it's still good enough to be useful - and I encourage the parent to continue their work, as it's an interesting area to explore.

Success! Per your suggestion, I used Chordino plugin with Sonic Visualizer. I pumped in one of my old recordings and it showed me "B6" and "Dmaj7".

However, this was only so helpful. It would have been better if it showed me a fretboard and lit up which notes are active. Instead it just showed me e.g. "B6" which unfortunately has multiple implementations so I had to try many of the implementations across many capo positions, and it ended up being a "B6" that I don't even see documented in any chord guides, probably because I was using a capo. I was eventually able to find it by guess and check: randomly moving my fingers and capo around the fretboard then if it sounds close look it up to make sure it's "B6" in a reverse chord finder (i.e. oolimo.de). Still pretty painful for amateur me.

Perhaps the fact that a given chord has multiple implementations makes it impossible for the analyzer to know which one I'm using, but in my case I'm strumming all 6 strings so I suspect it's doable. Do you know if any tools can show the results as dots-on-fretboard? Or maybe I need a more thorough reverse chord finder?

Ableton Live has a Audio to Midi [1] feature that works pretty well to extract notes from audio. Melodyne [2] is a very powerful tool to mess around with notes in general.

There's also some open source projects out there, such as aubio [3] and Omnizart [4].

[1] https://www.ableton.com/en/manual/converting-audio-to-midi/

[2] https://www.celemony.com/en/melodyne/what-is-melodyne

[3] https://aubio.readthedocs.io/en/latest/cli.html#aubionotes

[4] https://music-and-culture-technology-lab.github.io/omnizart-...

Automated music transcription - the process of generating a musical score from an audio recording - is a pretty active topic in signal processing (and has been for a couple of decades at least).

The monophonic case (one note at a time) is fairly well solved at this point: there are decades old solutions in both the frequency domain (like FFT) and time domain (like auto-correlation and the dozens of refinements of that basic concept) that work quite well under less than ideal conditions and in near real-time. Even naive solution like just counting the number of zero-crossings in the audio signal to estimate the fundamental frequency works pretty well.

The polyphonic case (like chord detection) is trickier, especially depending on what you're looking for exactly. I.e., is it sufficient to say "that's a C Major chord" or are you looking for a specific inversion or even fingering? Does it need to happen in real-time based off a microphone or could you batch-process an audio file instead?

But there are both academic solutions and consumer-oriented tools that can do a reasonable job of it (again, depending on what you're looking for).

If you're looking for guitar-chord detection in particular, I'd recommend you take a look at Chordify (https://chordify.net/). I'm even the developer of a product that competes with (or at least overlaps with) Chordify, but frankly it pretty much does what it says on the tin (extracts chords from audio recordings with more than acceptable fidelity, especially if you're willing and able to refine that by ear using the automated transcription as a starting point).

I'm pretty sure Chorify's solution is based on "deep learning" (ANN) techniques, but others have noted in this thread that's not the only viable way to do it. I suspect some combination of increasing computational power and algorithmic refinements will eventually lead to a "direct analysis" approach that becomes as common/conventional for polyphonic pitch detection as FFT and AC are for the monophonic case. There are already a number of fairly effective techniques depending on the constraints you want to put on the problem.

> The polyphonic case (like chord detection) is trickier

Very true, but for practical purposes chord detection is easier than polyphonic note transcription - it isn't necessary to transcribe all the notes with perfect fidelity to identify a likely chord, and there are many issues around note timing that become simpler when you assume one chord at a time.

> I'm pretty sure Chorify's solution is based on "deep learning" (ANN) techniques

At least at launch, I believe they were using a method more like that of Chordino - in fact using the same chromagram decomposition - but with a more sophisticated language model for chord transitions than Chordino's HMM.

(See this publication from one of Chordify's founders, et al, which I think is relevant, or at least interesting http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.294...)

I've also spent a fair bit of time on this topic and for what it's worth I agree with you. It is a harder problem than the monophonic case (and more sensitive to problems like noise under real-world conditions) but you don't strictly need deep learning or AI techniques to solve it.

I mean, computational complexity aside it seems like at least hypothetically you could even just apply basic auto-correlation-style logic to detect the period of the combined wave much like you do in the monophonic case (assuming the chord is sustained for long enough to actually capture that full period, which of course it won't be in the general case). There's nothing magical about a neural-net or other deep-learning-style solution to this problem - at the end of the day that's just an approximation of a formula that could in theory be derived through more direct means anyway. And (as far as I know) there's no reason to believe the polyphonic case is fundamentally resistant to more traditional techniques.

And as implied by your comment, the problem is made easier (or at least less resource-intensive) in practice than it is in the abstract: we're mostly interested in audio that's comprised of actual notes from the chromatic scale (rather than a combination of arbitrary frequencies). There's only ~140 or so component frequencies we really need to consider in practice. (Not to mention the semi-predictable repetition/progression patterns you're likely to encounter in most conventional songs. That's inadequate by itself but certainly a good way to error correct, fill in gaps, resolve ambiguous cases, etc.)

But that said, it does seem like polyphonic pitch detection is a problem that responds really well to machine-learning techniques. In my experience, even a fairly simplistic ANN (e.g., no hidden layers, ~1k to ~10k weights depending upon how the inputs/outputs are modeled) - when seeded with a little bit of domain-specific knowledge - can very quickly learn to perform reliable polyphonic pitch detection under real-world conditions.

To be fair, I haven't quite put my money where my mouth is on this topic (yet): I develop software that includes this sort of functionality and the current production version uses more conventional (or at least direct) analysis rather than so called "deep learning" techniques for polyphonic pitch detection. There are pros and cons to either approach, but I can definitely see why some find the deep learning solution attractive. There's probably some degree of magical thinking involved (i.e., "AI will solve this pattern recognition problem that's too hard for me to work out from first principles"), but it also seems to work really well in this case.

For what it's worth I think you've got the right general idea, or at least (based on your brief description) I think I arrived at a solution that's based on some similar concepts and found it fairly effective (beyond the proof-of-concept phase). And as you noted there are related concepts discussed in some of the published academic research. I'd love to hear a little more about your approach if you're willing and able to share any more details. (Noting that at least part of my interest in that topic is selfish, of course.)

Thus propagating the NN "If all you have is a hammer" trend. I don't quite know the nuance of music theory, but could you not get away with traditional Fourier analysis? You just need to decompose the song into its constituent frequency "bins" right?

The trouble with analysing "notes" in a composition (or even just with a polyphonic instrument) is the pesky harmonics. The timbre of different instruments produce harmonics that happen to be the fundamental frequencies of other notes.

Would it be possible to eke out the harmonics by saying (for 'x' type of guitar tuned in 'y' way with 'z' effect, harmonics look like this). Like if the fundamental frequency is f, then the whole note looks like 0db at f and -5db at 2f and -10db at 3f or something. Then, when you're looking at the frequency domain, you start from the lower notes and say "hmm, looks like there's a fundamental at f, are the expected harmonics there"? If yes, that's the note, if no, it's something else.

This is basically how you'd do it with non-negative matrix factorization. You take the spectrogram of a bunch of known notes for that type of guitar, and store them in a template library (just a vector of vectors, where each inner vector is a spectrogram of that note). Then NNMF determines how much of each template contributes to some given signal. The templates are the "harmonics look like this" thing you're talking about. It works pretty well.

By the way, the reason it is easier to use NNMF than try to implement your suggestion as a heuristic is because there's much more overlap between the different notes than you might think, and (worst of all) the timbre of the note:

1. evolves over time!

2. depends on the velocity of the note (how hard the string was strum)

3. and the notes actually interact with each other. If you play an E, the A string will mildly reverberate too because of the shared harmonics

It is absolutely possible (and effective, depending on what you consider to be an adequate ROI) to apply this sort of heuristic to this domain.

The "holy grail" of a universal AMT that works with any number of instruments of any type played concurrently isn't exactly an intractable problem to begin with, but if you constrain the problem in various ways (to specific instruments, to known tunings, etc.) you can definitely take advantage of a priori knowledge about the "timbre" of the instrument and the way in which the sound wave evolves over the duration of the note/notes to work-around what would otherwise be more ambiguous data. The octave/harmonics problem is one example of the kind of problem that is much easier to eliminate (relative to the abstract case) if you can make assumptions about the type of instrument that is generating the sound.

The overtones generated by the vibrations of a guitar string (for example) follow a fairly specific and distinctive pattern. If you dig a little bit into the physics/mechanics by which a given instrument generates sound there is a lot of tell-tale information to take advantage of.

Well the NN has to have something to operate on, and I think a Fourier analysis may help as an input.

There is just too much going on with a track. Its really strange for us to say this mash up of sounds is "really" A-D-E at the heart of it, and when I play these chords it will suggest that wall of sound you heard on the record. The net is just capturing our biases.

No, at the very least you also need to do the instrument separation, e.g. bass might match guitar chord root note at one moment, and do something entirely different half a second later, and of course in a coherent song all the different instruments will merge in the same frequency bins, either directly or with their overtones. Also, for certain instruments and effects on e.g. guitar amps the strongest peaks of Fourier transform for the instrument output may not necessarily match the notes that are actually being played.

As other commenters have expounded on, the short answer is "no". While I definitely agree that one must be careful about falling into the trap of thinking everything is a nail to be hammered with NNs, it's also pretty common to fall into the "this is easy, why don't you just..." trap for things that humans do with (relative) ease.

Ubisoft has a new version of rocksmith coming out and plans to build most of their library on this technology.

Wait, really? I would think they would use some kind of canonical source for the tabs they've licensed. Maybe I expect too much.

With OG Rocksmith (and 2014), the charts were supposedly all done by the folks at Ubisoft. They'd watch live videos and have multiple go-overs with each other to make it as accurate as possible. Besides, "official" tabs (at least historically) were usually not done by the actual artists, but some company that was just given the recordings and paid to figure it out.

They have two modes: 1. Transcribed tabs. They own the transcription as they have done with their catalogue in existing Rocksmith games. I believe they claim they use some “AI assistance” here, but I could be wrong. At the end of the day, they pay a large number of musicians to chew through songs and write tabs. 2. Chord following. They use automated transcription to get the chords for a very large number of songs. This is a new mode in the newest game and is entirely automated, but limited.

Ah yes, Rocksmith+ that requires a subscription to use, and will not work if you are not connected to the internet (i.e. if your subscription lapses, your purchase is worthless). It's now been delayed until 2022, I wonder if the feedback made them realize that while the board may love the idea of mandatory subscriptions, customers hate it.

I don't think finding individual notes / the inherent notes within a chord is likely that difficult. The problem with this sort of thing is the nuance that's really involved - a player with a decent ear will be able to tell if the same A note is played on an open string, on the lower, fatter strings, or further up the neck. With chords, you also need to start considering voice leading (where you're specifically picking chord inversions for melody, which on guitar will affect how / where you play a chord) and how the mechanics fit together overall (I probably don't want to play an open C chord followed by something on the 11th fret, for example).

Tell me you have a good ear without telling me you have a good ear.

Aren't there a fair amount of songs where the guitar is in some non-standard tuning or played with a kapo, etc? I imagine a naive ML approach would spit out some tabs that would be difficult to play without that context.

Yeah exactly what I was going to say, you have to consider the chord voicing, the strum pattern, and whether the sequence of chords makes sense for a human to comfortably play.

Someone above mentioned: "Here comes the sun", which is a great example.

First gotcha, it sort of sounds finger picked, but it's not it's flat picked. Another unusual thing about that song is that it's played w/ a capo on 7th fret.

Now I'm sure some software could figure out the individual notes, but I wouldn't be surprised if it transcribed it as nonsense sequence of notes all over on the g, b and e strings, instead of arpeggiated chords as it really is played.

In addition to that, the same set of notes can represent different chords depending on the context and the chord's function, so instead of just picking up notes and recognizing them, the software has to actually understand the chord progression and the harmony.

Against my better judgement I actually logged in with Spotify, only to find that it just didn't work. I'm not really sure what I was expecting anyway.

There used to be a great trade in guitar chords online, but then lots of small sites got taken down and ultimategyitar tried to put a big shitty paywall around years and years of high quality content made by volunteers and often scraped from other sites.

One of my first tastes of the web was finding tabs on ftp servers!

Looking at the JavaScript of the site, it looks like all it does it scrape the search results from ultimate-guitar.com for the songs in your playlist.

Seriously ultimate guitar just effed over so many people who put time and effort into spreading guitar chords.

That and their site is covered in so much ad content.

I have contributed many tabs to guitar archives over the years. Some are available via Ultimate Guitar.

How am I being ‘effed over’? I might be, but I haven’t spotted how.

It's classic tragedy of the commons - most of ultimateguitar and other sites have just scraped 'content' off the good old spirit of the early web all the way back to newsgroups then put a paywall and ads all over it.

still beats pre internet though when you'd buy an expensive book of sheet music with first position camp fire chord diagrams and a piano arrangement written out by someone who appeared to have little feel for the actual recorded music.

Without inversions, suspended chords, added base notes etc most chord naming isn't much use, tabbed out diagrams for guitar and keyboard are really helpful along with all the wonderful youtube content from jamesjames, late night lessons etc

If anyone knows of a free and open-source guitar tab sharing site, I'd be interested.

I wrote some tabs recently and ended up just putting them on my personal website. Hopefully people will search via Google and find them.

I don't know of any "open-source" tab sharing sites (i.e., sites specifically dedicated to CC or other permissively-/share-alike-licensed transcriptions) but for what it's worth there are a large number of "free" (as in beer) guitar tab repositories, or at least a large number of places that include freely-available, user-contributed content within a broader freemium or ad-supported service.

Beyond the usual web-based suspects (some of which have been named elsewhere in this thread) there are also a number of other tab sharing "communities", including some relevant subreddits that might be the easiest way to spread the word if you're not comfortable uploading to a more directly for-profit service (not that Reddit isn't for-profit too, but guitar tabs certainly aren't their business model and you'd largely be linking to files stored elsewhere rather than uploading them directly).

But a lot of people seem to do what you did also. I suspect it's not super-effective as a distribution model, but if you dig a little it's not hard to find smaller/specialized tab collections on personal websites or general-purpose file hosting services like Google Drive/Dropbox or even at places like Github.

I don't think Google's `filetype:` operator respects guitar-tab-related extensions like `gpx` or `gp5` or `tab` or whatever but using the `inurl:` operator (or just including the tab-specific file extension) combined with the song title or artist name is a good way to find some of these less-centrally located tabs.

Also there are several massive collections available via torrent and on some of those more gray-hat-ish anonymous/one-off file-sharing services. Arguably these may have a more questionable provenance but I suspect the plurality if not the majority of the guitar tabs you'll find shared anywhere online could be traced back to old-school usenet or the first generation of tab-sharing websites that grew out those communities. Ultimate-Guitar for example self-reports as having "chords and tabs to over 1,100,000 songs", and likes to highlight their "official" (licensed) transcriptions (and to be fair they are nothing to sneeze at), but it's probably no coincidence that they don't seem to report the ratio of "official" to "community-provided" transcriptions.

EDIT: Just out of curiosity I checked the file-count reported at the bottom of UG's search page when filtered by file type, I see:

* 18,688 "official" tabs (AFAIK these are the only actually licensed transcriptions)

* 212,408 "Guitar Pro" (.gpx/.gp5/.gp4/.gp3) files; user-generated and many of which probably weren't originally uploaded to UG

* 1,115,129 plain-text transcriptions (801,597 "chords", 313,532 "tabs") that almost certainly date back to Usenet-era communities

The ~20K of licensed/official transcriptions are impressive (both individually and collectively) but represents less than 2% of the overall song catalog (and much less than 2% by file count).

I don't know if it's the case any more, but I found that in the past many of the "official" tabs were actually just the highest rated Guitar Pro tab converted to use the web player and dressed up to look fancy. With a little bit of effort you could get the same result just by looking for the highest-rated gp5 and using that locally.

I actually run a guitar chord website, www.guitarparty.com, that provides chords for songs, but also some additional functionality such as PDF books, transposing songs etc for subscribers. But the content is free although you have to tolerate a few Google ads. We're mostly local to Iceland but there are always some users and subscribers from around the world.

We once attempted to go the legal route globally and make a deal with Harry Fox Agency (the agency that took down OLGA), we had a contract ready but it would have been quite expensive and risky for us. That being said, we pay royalties to our local copyright agency based on usage.

Does your site or any other allow a user to click notes on a fretboard and have the app deduce the chord from the positions? I know a lot of chords the names of which I have forgotten, and don't have the theory chops to work it out myself

Heres one https://jguitar.com/chordname

Amazing!

  Search for finger pattern = {5 4 3 4 1 1}: 16 results found.
  A+add9add#9  A Augmented Add 9th Add Sharp 9th
  C#+7add7/A  C#/A Augmented 7th Add Major 7th
  F5addb5addb11addb13/A  F/A 5th Add Flat 5th Add Flat 11th Add Flat 13th
  ...

I can't quite figure out if your response is meant to be sarcastic or not - i.e., if you're "amazed" at the completeness here or maybe mocking the specialized/exotic chords it came up with in this case.

I apologize if this is obvious or well known to you, but for anyone not already familiar with it recognize that much like (and not wholly independent of) musical scales, chords are essentially defined by a predictable "formula".

E.g., every major chord is described by interval pattern 0-4-7: starting at any note, take the root, major-third (4 semi-tones above the root) and perfect-fifth (7 semi-tones above the root) and you have the major chord. For the root note C that yields C-E-G.

Rotate that pattern so that the root note is pitched above the major-third and perfect-fifth (e.g. something like 4-7-12) and you have an "inversion" of the major chord. For the root note C that's E-G-C (known as "C/E") or G-C-E (known as C/G).

Based on these interval patterns it's not hard to generate an exhaustive list of chord "families" (with members like "Major" or "Dom13Aug5" or whatever) - there are at most 4096 (=2**12) of these interval patterns in a single octave, and many of those are relatively uninteresting due to symmetry, degenerate cases or just plain dissonance. (To be fair many common chords span more than one octave.)

A given collection of notes (fret/string combos on a 6-string guitar for example) is usually going to map to some variation of one of those interval patterns, possibly with a stray interval added, dropped or repeated. (E.g., the typical X32010 fingering of C Major on guitar corresponds to C-E-G-C-E rather that "simply" C-E-G.)

So it might seem like mapping an arbitrary fingering to the corresponding chord name requires a lot of information, but it's just matching notes (or pitch classes) to a moderately small number of named interval patterns.

And it might seem like "F5addb5addb11addb13/A" is a ridiculously over-specified chord name, but that's a function of applying a set of conventional "modifiers" to a simpler/better-known/more-common chord. (In this case, `F5addb5addb11addb13` = `F5 + add(b5) + add(b11) + add(b13)`, i.e., F5 (F + C) with a diminished-5th (C), diminished-11th (B) and diminished-13th (C#) added.) You could argue that the pattern matching is trying too hard in this case, but if you're dedicated to assigning a "conventional" chord name to an arbitrary collection of notes, there's algorithmic way to do that.

Again, apologies if this is obvious to you (user Y_Y), I just thought I'd try to de-mystify it a bit for anyone to whom this seems like alchemy.

Music theory has a bunch of semi-arbitrary naming conventions that make it sound really complicated to the uninitiated, but in the abstract the chord names are basically just bit-masks that specify interval offsets from a given root note.

Haha yes, I was being intentionally silly. Thanks for the very nice explanation though, I find that it can be really difficult to explain these things to non-musicians and I like the way you've done it.

(By the way, I also deliberately chose something that should be excruciatingly difficult to actually play on a normal guitar.)

I use oolimo (https://www.oolimo.com/guitarchords/analyze) for this as it gives you the notes, intervals, and chord names on the fly with easy inversions

I learned to play guitar back in the 90s when the OLGA was still a thing.

UG sucks for precisely the reasons you mention.

I suppose the trade-off is that now all the great folks who were making nice tab content are on YT, but still, if you'r business model is making money off aggregating a bunch of content people created in the early 00s because the love of it, then that's hyper lame.

I still use UG if I am in a hurry and want a quick idea of other folks' take on the structure of a song, but I'm thankful I outgrew the need for other folks' transcriptions.

I disagree.. I learned guitar in the late 80s and getting tabs back then meant to get on the train, drive an hour into the city pay like 20 to 30 bucks for - one album worth of tabs - lets say "Appetite for Destruction" and drive home another hour... and then a lot of this "official tabs" were complete rubbish...

So Ultimate Guitar is a steal really. I got a lifetime subscription a couple of years ago but I would also sign up for a monthly plan gladly.

Heh...a guy I knew in college got a meeting with admin when he thought it would be cool to host an OLGA mirror on his university web storage around 1995 or 1996.

OLGA was the Eldorado for my teen self. Its demise was a disaster.

I still have a full copy of its archives somewhere collecting dust in my old hard drives.

I do too, let me know if you know/think of a good place to host these. UG must be one of the most user hostile resources I've ever attempted to use.

As an alternative, I use cifraclub.com.br for many years, and enjoy the interface and the overall quality of the chords (not affiliated with them).

It's not in English, but you should be able to figure out where's the search bar and use it without much effort.

UltimateGuitar is so pushy with their ads and subscriptions, it's a crime.

Neat shortcut though. Thanks for the effort.

uBlock + some extra style blocks works pretty well to make it go away IME. The extra style blocks will remove the fake overlays with videos that they add, or the tight padding, etc.

Is there a way to demo how it works, before I sign in with my Spotify account & share my data?

Wish there was some kind of example of what it looks like before I log in with my spotify account.

Yeah. The playlist part seems unnecessary too -- why not just have it work on a single song?

Because all it does is scrape search results from ultimate-guitar.com so without the Spotify playlist integration it would be entirely pointless.

In the good old days of Winamp (15 years ago...) I created a plugin that scraped the web and showed the chord in Winamp as you played a song. The code was dead easy to implement as it was just an embedded site within Winamp (HTML & Javascript & Winamp JS SDK). And surprisingly the site is still running! Not sure if the scraping still works though http://pikkipowpow.davidsmit.za.net/Home.aspx

So yes there are definitely a use case for all the new media players to show chords

Tangentially, if you want to get chords from a song (and can't find them already written online), Capo does a pretty great job at it and is very easy to use. Mac/iOS only, but the best I've seen.

https://supermegaultragroovy.com/products/capo/

I built something similar for personal use. It's a Mac app that uses AppleScript to poll Spotify for the track that is currently playing. It then looks for chords on Ultimate Guitar through a small NodeJS API that uses Puppeteer to scrape the site. I'll usually just put my guitar playlist on shuffle and have this app open alongside it.

Oh so this is not what I thought it is. I thought it actually figures out the chords for any given song.

Yeah agreed.. wishing I hadn’t given them my Spotify credentials.

I feel a lot of egg on my face

You want Chordify, then. It uses YouTube instead of Spotify but does a pretty good job of finding chords.

https://chordify.net/

Hah! I made a similar thing where I have a button in my extension bar on chrome that I click to perform a google search of [song I'm listening to on spotify] + " chords". Waiting for firefox manifest v3 update to add final touches.

Hi! In terms of your credential flow - did you get a quote extension from Spotify for your use-case? I know that this kind of log in flow is really restricted without requested (at least in my experience working with the API).

Hi, I didn't get a quote extension, I never actually looked at the quote limitation because I was only using it myself.

Edit: I checked on the Spotify developer dashboard and it says "App Status: Granted quota extension"

Someone from Spotify should have read this on HN and decided to give you a present :)

This is great, I was thinking of a similar idea recently- thank you for making this! If you haven't already, I would suggest sharing it on reddit too- I think /r/guitar and some others would love it :)

Learn them by ear, no tabs, YT vids, or anything else. Much more gratifying, you'll thank me later and become a better player.

Good advice for someone experienced, terrible advice for a beginner.

If you want to kill someone's love for playing and have them hate their favorite songs, make them use their completely untrained ear to listen for chords they don't even know through layers of amp effects, pedals, and editing.

This just searches ultimate-guitar.com for you. Why do I need your app for that? I'll just go to the source.

Anything for bass lines? I wanted to build somestuck. As a project, but I suck.

This is really great product. Keep it up!

Reply on news.ycombinator.com