Note that restricting airflow on a radial fan can cause the motor to heat up. Make sure you get a 20-inch fan with a fuse. To reduce heat, increase air flow by making a box with three filters and by using 2 inch deep filters. Also, when I built my three filter "box" last fall, I was able to order a set of three MERV-13 20x20x2 filters directly from Nordic Pure for less than what they cost on Amazon. Finally, to make a cube, cut the remaining sides from the filter box. Then roughly tape it together with small pieces of duct tape. When the filters and panels are in the right spots, seal it completely with duct tape. Remember to put the box of filters on the "pull" side of the fan with right sides of the filters facing outwards.