OpenEMS: a free and open electromagnetic field solver
openems.de
openems.de
Also : http://openems.de/start/index.php?show=home
[connectivity worked initially, it appears the site is being 'HN'ed']
Seems similar (though much more advanced), to a piece of DOS software I remember floating around various "overunity" forums I used to visit years ago (I have a secret fascination with such efforts; I know they can't succeed, but it is interesting to see the lengths and effort people go for to try), though I don't recall its name.
This software would probably be very useful for designing motors and generators, and for the DIY crowd in those areas.
[1] https://en.wikipedia.org/wiki/Finite-difference_time-domain_...
I use AWR (Axiem, Anaylst), CST, and Sonnet. I'm satisfied with accuracy; need more speed. It's at a point where material and manufacturing tolerances are more of an issue, so I need to run parameter sweeps, yield analysis, etc. So multi-threading, GPU acceleration, and distributed computing help that.
Working on a thick patch antenna today. Axiem (2.5D infinite substrate) said 1.57 GHz. Analyst says 1.51 GHz. It actually measured 1.53 GHz. That's a 3% error on an 8% 12 dB RL bandwidth antenna. Those simulated results are after mesh convergence, so finer meshing won't help.
So I use 2-3 solvers on a single problem. It's important that the geometry translation between them be quick and easy. That's where AWR comes into play; everything plugs into it. 3D solver (modeling) is horrible for pushing polygons during the design process. 2.5D solvers are awesome for this, but then you need to sometimes push the geometry to 3D solver.
Accuracy isn't really at the forefront of our concerns because most EM solvers since the 70's are good enough in those terms, and going to higher order methods aren't worth it for us if it is so much slower. What we need is speed. For me, give me a way to do 50 simulations in a month that are converged enough that allow me to do a parameter scan over laser phase, focal point, etc. Allow me to do more 3D simulations. That what I need. The reason is that for me, plasma is so fuzzy anyway that the nth term error in the expansion pales in comparison to if laser focuses half a micron off target, which is a much more common source of error bars in a real experiment.
I imagine it's similar for engineers, our solvers are good enough for most problems, just make them faster and allow us to do more 3D simulations in shorter time.
----
(Edit: What a cool device!! I've just been reading up on them and Wowee! I'm in the wrong field. No pun intend.)
No - just pulled the paper on it and put that on my to-do list. We've been focused on large problems recently and people seem happy to stick with scattering by spheres (PEC or dielectric) and comparison with the Mie solution. Way too much symmetry to serve as a comprehensive benchmark, but a decent way to compare computational efficiency. Our current benchmark run for a 100 wavelength diameter PEC sphere is 48 minutes on 256 CPU cores with 0.13% RMS error in the far field. We recently got 1.8% far field error for the 500 wavelength case on 300 cores in 17.8 hours. Our preliminary 1,000 wavelength numbers are very promising, too. No GPU/MIC or unusual hardware for those tests - all on a cluster of modern servers with Intel Xeon CPUs with 2-4 GB RAM per core.
Finding good benchmarks for sharp corners has been more challenging. The one we've been using for that is planewave scattering by a PEC cube and we test that the fields inside are 0 everywhere (including arbitrarily close to the surface at corners and edges).
Thanks for your other comments - geometry translation comes up often. Post-processing as you mentioned elsewhere is a common pain point, too, but solutions there seem to be pretty application/domain specific.
Does your code handle lossy dielectrics?
Anyway to instantiate near-field excitation sources on large structures? That's one nice thing about CST; save the near field results from an FEM antenna simulation and instantiate them into a TLM simulation on a large structure.
A a side note, we had a new near field chamber installed, and the guy from Orbit/FR used to run several test ranges. Got on the topic of antenna standards (there really are not any, even standard gain horns). He developed some cylinder standards for scattering. They ship them around the world to verify ranges.
We started out focused on RCS problems for algorithm development and validation, but we're shifting to more antenna design and analysis (mounted antennas, installed performance, placement optimization). We have done near-field excitation of our own models on large structures, but usually our goal has been to maintain accuracy so our use case has us solve the driven antenna and the platform together in one go.