It costs around 500$ to get similar performance. So ~500$ / (0.20$/kwh * 0.102kw * 2/3) that's ~37,000 hours or 24/7 for 4 years.
So, no lower power is not a solid reason to upgrade.
So, no lower power is not a solid reason to upgrade.
It's just not cheap, being a 240mm2 die (almost twice what Kaby Lake is, with attendant yield penalties) targetted at a niche market with low volume.
So your point isn't that Intel isn't innovating, it's that you want them to do it in a way that violates straightforward economics and hand it to you for less than it takes to produce.
Basically: you got spoiled by the early days of the VLSI revolution. Silicon scaling isn't doing what you expect any more.
They don't do this because they have zero real completion and can milk the high end market. Further, by holding back performance gains they can extend the upgrade cycle as long as possible.
PS: Cellphones are approaching Desktop chip performance.
Yeah, that's not how silicon manufacturing works. Tooling up for a new part of this size and ramping production gets into the tens to hundreds of millions of dollars. No one does niche-market (and yes, gaming desktops are niche) parts at the prices you expect.
Low-volume big parts cost a thousand dollars or more, that's no different at Intel than it is anywhere else.
Further, Intel already has a range of chips in production making that 100's of millions per chip vastly overblown. You can measure these numbers in several ways, but ramping up 100 million of chip X or 80 million of chip X and 20 million of chip version Y is nowhere near 200+ million.
Just finished a CAD workstation build for my wife with state of the art components. The performance gain over a couple years old "pro laptop" she used before is enormous. And not just on raytraced views and renders, the whole UX is much much smoother.
I recently upgraded from an '09 processor because my motherboard died. Trying to find a new one to fit the old chipset was rough, so I got a processor as well. I didn't need to get a new processor, because it wasn't the bottleneck. There are many instances where the new one will give me better results, but it wasn't so bad that I was hurting. Unless you have a specific need, upgrading for the sake of upgrading is largely wasted money.
That's 4 years running the CPU at full tilt. The 2600K will idle at a lot less than 102W
Yeah, and OP was saying that was only the socket consumption, you've also got to add in chipset, memory, discrete GPU, hard drives, NIC, sound, etc... and power supply overhead as well.
I bet that system was pulling 400-500W total under the load he described.
Further the delta is only like 60w under full load.