DIY control pedal on Linux

That's what I was thinking when I was reading this, an 11$ teensy uC could do the job very easily, it's got a keyboard emulator built in. I love the teensy uC, it's completely replaced the arduino for me. So much cheaper and more capable.

Yes, that's what I tried - but there was a case when next press or release happens while signal is already off-scale from previous event, and I failed to find any sane way to solve that case. Also, the scale on the images is 500ms per one red square, so you can see that waveforms extend over hundreds of milliseconds - thus there will be unbearable latency with that approach.

Emacs people...

Yes, if people say that esound was already outdated by 2003, then by now it should be very much dead. But I was more focused on completing this project than on researching sound APIs, thus I simply took whatever Xoscope guys used.

After all, we simply want to read voltage level from simple input - why should we need to invent new library for it every 3 years?

I use it exactly for that, and it really helps me when navigating in Emacs (holding Ctrl with pedal is much easier than holding it with your pinky). Your experience may vary, of course.

I'm using a kinesis keyboard with the "savant" pedal, which can be configured to do anything you need.

I used it for a while as "shift", then ESC and control, then I stopped. Not so much because it wasn't efficient (I still think it's better than using caps-lock, not so much for other keys), but because it enforced a more rigid posture when sitting. I like to move the feet a lot, and change the sitting position. Instinctively I tended to stay more rigid instead of moving the pedal.

But YMMV. If you tend to abuse shift to capitalize words, a pedal is worth considering.

I also just used a mouse attached to a piece of cardboard, controlled with the foot just by sliding it on the ground. Just too hard to control fine movement. I briefly tested just a mouse with the bare foot, but the foot joint just doesn't has the versatility of the wrist. It was also annoying that I had to use a keyboard combo to perform the clicking (since I used the toes to hold it).

Trying costs nothing though, so have fun and try for yourself. Pick a crappy keyboard, and construct a lever with a V shaped piece of cardboard. Position the pin on the back on the key that you want to "try". It won't be as rigid or comfortable as a pedal (you cannot "rest" on it), but you can get a feel of how it works. I let several of my colleagues try the pedal since I don't use it anymore, but it's not something that is easily appreciated.

It certainly requires some training to get used to, especially to generate control sequences. I would advice to try one before buying for this reason.

I'm not using Vim or Emacs but still doing intensive use of ctrl and shift in Visual Studio so I might give it a try :) Thanks for your replies

I've been using a pedal on my Kinesis for a shift key for about 5-10 years now.

At some point I noticed that my left pinky was experiencing more pain than my other 9 fingers, due to its heavy use for holding shift and ctrl while pressing other keys. The Kinesis has two lovely ctrl keys in the thumb position, so I trained myself to start using those instead by remapping the pinky-placed ctrl key to F12. (Initially I just unmapped it, letting it devolve back into the awful capslock key, but F12 actually proved to be a better deterrent for retraining, as its negative effect was immediate.)

That helped with the pain, but only a little. So I bit the bullet and mapped the shift key to F11, forcing me to use my foot pedal for shfit.

Even after years of practice, it's still hard to use. The timing of a foot press is very different from a finger press -- the leg muscles require more time to build up the extra force necessary for the pedal. (The pedal is much stiffer than a keyboard key, because it has to accept the weight of the front of my foot without triggering, as opposed to the weight of a single finger.) I still find myself capitalizing the second letter of a word because of this issue. wHich looks ridiculous. And it forces me to sit squarely in my chair, with legs uncrossed, which I find very unnatural.

But my left pinky doesn't hurt anymore.

> Is anyone using a pedal in addition of a keyboard on a daily basis?

i've been using foot pedals with a kinesis advantage for a couple of months. note: i don't always use the pedals.

> Do you really think this could be a significant help when typing code?

no. i'm slower with the pedals, but my immediate goal was to reduce RSI-related pain, not to increase typing speed. to that effect they've been effective.

At least they are consistent and break the back swipe on mobile as well.

Yes, you are right - I got confused with mono/stereo distinction. It is TS connection, right?

That was my first thought - I selected some generic USB pedal, but it failed to arrive, so I used what I had at hand. Also, there could be a problem with pre-made USB pedals - they may only transmit events on pedal down, like it happened for Vim Clutch author (https://github.com/alevchuk/vim-clutch).

Some of those cheap USB foot pedal switches have a disturbingly custom software architecture. When I bought one off Amazon, it turned out to not even be HID - it needed special drivers and everything. Even the ones that are HID-compliant usually demand some custom software for initial setup ("which key do you want me to pretend to be?") that invariably only speaks windows. Which is annoying, because this really should be just a full-hardware solution that speaks USB HID and uses a set of DIP switches on the back for the desired scancode.

This was my immediate thought, but then I got confused. Where does the pedal get it's voltage to generate the signal to begin with? From the audio jack itself? If that's true, why does it return a signal too high for the sound card to handle? Is there some sort of voltage amplifier in the pedal that can be bypassed?